* Socrates-and-An Easier OCR? @ Hart Larry ` Kirk Reiser ` Willem van der Walt 0 siblings, 2 replies; 8+ messages in thread From: Hart Larry @ UTC (permalink / raw) To: speakup Well, I would have asked this on Blinux list, but since Kirk ha developed an OCR engine, I am asking here. I am on the verge of having my scanner working, finally. I really don't know which of the scanning engines, gocr, tesarac, or any others, have the best results? But as important for me, which one, including any helpful scripts will make the process simpler? When I was in windows using OpenBook, it was as simple as hitting a space bar to scan. When I looked in google, I noticed some1 who was updating cunaform, also a script called zenity, also, speedy_ocr. Maybe these are not exact spellings or punctuation, but I suppose some of you know what I am looking for? As far as Socrates, I can still find commands which maybe did grab it in the past, but where if anywhere is their a straight download, which would work in Debian 2.632? Also, if there are repos I should include, please inform--and-thanks so much in advance Hart ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? Socrates-and-An Easier OCR? Hart Larry @ ` Kirk Reiser ` Willem van der Walt 1 sibling, 0 replies; 8+ messages in thread From: Kirk Reiser @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. We haven't done anything with socrates for a long time. It has no prebuilt binaries and is only available from cvs. There is a gnome package or not a gnome package but a package which runs under gnome called easyocr on sourceforge. I believe they have ubuntu deb files available for it. Maybe someone has the URL handy I don't. I can look it up however if you can't find it. I don't know anything about it's quality or ease of use however. Kirk On Thu, 15 Sep 2011, Hart Larry wrote: > Well, I would have asked this on Blinux list, but since Kirk ha developed an > OCR engine, I am asking here. I am on the verge of having my scanner > working, finally. I really don't know which of the scanning engines, gocr, > tesarac, or any others, have the best results? But as important for me, > which one, including any helpful scripts will make the process simpler? When > I was in windows using OpenBook, it was as simple as hitting a space bar to > scan. > When I looked in google, I noticed some1 who was updating cunaform, also a > script called zenity, also, speedy_ocr. Maybe these are not exact spellings > or punctuation, but I suppose some of you know what I am looking for? > As far as Socrates, I can still find commands which maybe did grab it in the > past, but where if anywhere is their a straight download, which would work in > Debian 2.632? > Also, if there are repos I should include, please inform--and-thanks so much > in advance > Hart > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- Kirk Reiser The Computer Braille Facility e-mail: kirk@braille.uwo.ca University of Western Ontario phone: (519) 661-3061 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? Socrates-and-An Easier OCR? Hart Larry ` Kirk Reiser @ ` Willem van der Walt ` Steve Holmes 1 sibling, 1 reply; 8+ messages in thread From: Willem van der Walt @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Hi Hart, The kies package I have released has a set of scripts like you describe. It is called kies_p2t for kies_paper to text. It supports multiple OCR engines. Tesseract is good and cuneiform IMHO is the best, also allowing for decolumnization. For 140 euro, one can buy abbyyfinereader, a good commercial engine. You can get kies from: ftp://ftp.csir.co.za/MI/National_Accessibility_Portal/wvdwalt/kies-latest.tar.bz2 HTH, Willem On Thu, 15 Sep 2011, Hart Larry wrote: > Well, I would have asked this on Blinux list, but since Kirk ha developed an > OCR engine, I am asking here. I am on the verge of having my scanner > working, finally. I really don't know which of the scanning engines, gocr, > tesarac, or any others, have the best results? But as important for me, > which one, including any helpful scripts will make the process simpler? When > I was in windows using OpenBook, it was as simple as hitting a space bar to > scan. > When I looked in google, I noticed some1 who was updating cunaform, also a > script called zenity, also, speedy_ocr. Maybe these are not exact spellings > or punctuation, but I suppose some of you know what I am looking for? > As far as Socrates, I can still find commands which maybe did grab it in the > past, but where if anywhere is their a straight download, which would work in > Debian 2.632? > Also, if there are repos I should include, please inform--and-thanks so much > in advance > Hart > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard. The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html. This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? ` Willem van der Walt @ ` Steve Holmes ` Willem van der Walt 0 siblings, 1 reply; 8+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup Is it posible to use a TWAIN style scanner with Linux? I know SANE has been prefered but I baught a Epson scanner recently and I then discovered that it is a TWAIN instead. Do I have any Linux options for this scanner? I use it with DocuScan on Windows from Serotek. On Fri, Sep 16, 2011 at 10:07:06AM +0200, Willem van der Walt wrote: > Hi Hart, > The kies package I have released has a set of scripts like you describe. > It is called kies_p2t for kies_paper to text. > It supports multiple OCR engines. > Tesseract is good and cuneiform IMHO is the best, also allowing for > decolumnization. > For 140 euro, one can buy abbyyfinereader, a good commercial engine. > You can get kies from: > ftp://ftp.csir.co.za/MI/National_Accessibility_Portal/wvdwalt/kies-latest.tar.bz2 > HTH, Willem > > > On Thu, 15 Sep 2011, Hart Larry wrote: > > >Well, I would have asked this on Blinux list, but since Kirk ha > >developed an OCR engine, I am asking here. I am on the verge of > >having my scanner working, finally. I really don't know which of > >the scanning engines, gocr, tesarac, or any others, have the best > >results? But as important for me, which one, including any > >helpful scripts will make the process simpler? When I was in > >windows using OpenBook, it was as simple as hitting a space bar to > >scan. > >When I looked in google, I noticed some1 who was updating > >cunaform, also a script called zenity, also, speedy_ocr. Maybe > >these are not exact spellings or punctuation, but I suppose some > >of you know what I am looking for? > >As far as Socrates, I can still find commands which maybe did grab > >it in the past, but where if anywhere is their a straight > >download, which would work in Debian 2.632? > >Also, if there are repos I should include, please > >inform--and-thanks so much in advance > >Hart > >_______________________________________________ > >Speakup mailing list > >Speakup@braille.uwo.ca > >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > -- > This message is subject to the CSIR's copyright terms and > conditions, e-mail legal notice, and implemented Open Document > Format (ODF) standard. The full disclaimer details can be found at > http://www.csir.co.za/disclaimer.html. > > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? ` Steve Holmes @ ` Willem van der Walt ` Steve Holmes ` Steve Holmes 0 siblings, 2 replies; 8+ messages in thread From: Willem van der Walt @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Hi Steve, You should be able to get your Epson to scan using sane. Is it USB? What happens if you give the command: scanimage -L under the console in Linux? The best is to google with your scanner name and model and sane. HTH, Willem On Fri, 16 Sep 2011, Steve Holmes wrote: > Is it posible to use a TWAIN style scanner with Linux? I know SANE has > been prefered but I baught a Epson scanner recently and I then > discovered that it is a TWAIN instead. Do I have any Linux options > for this scanner? I use it with DocuScan on Windows from Serotek. > > On Fri, Sep 16, 2011 at 10:07:06AM +0200, Willem van der Walt wrote: >> Hi Hart, >> The kies package I have released has a set of scripts like you describe. >> It is called kies_p2t for kies_paper to text. >> It supports multiple OCR engines. >> Tesseract is good and cuneiform IMHO is the best, also allowing for >> decolumnization. >> For 140 euro, one can buy abbyyfinereader, a good commercial engine. >> You can get kies from: >> ftp://ftp.csir.co.za/MI/National_Accessibility_Portal/wvdwalt/kies-latest.tar.bz2 >> HTH, Willem >> >> >> On Thu, 15 Sep 2011, Hart Larry wrote: >> >>> Well, I would have asked this on Blinux list, but since Kirk ha >>> developed an OCR engine, I am asking here. I am on the verge of >>> having my scanner working, finally. I really don't know which of >>> the scanning engines, gocr, tesarac, or any others, have the best >>> results? But as important for me, which one, including any >>> helpful scripts will make the process simpler? When I was in >>> windows using OpenBook, it was as simple as hitting a space bar to >>> scan. >>> When I looked in google, I noticed some1 who was updating >>> cunaform, also a script called zenity, also, speedy_ocr. Maybe >>> these are not exact spellings or punctuation, but I suppose some >>> of you know what I am looking for? >>> As far as Socrates, I can still find commands which maybe did grab >>> it in the past, but where if anywhere is their a straight >>> download, which would work in Debian 2.632? >>> Also, if there are repos I should include, please >>> inform--and-thanks so much in advance >>> Hart >>> _______________________________________________ >>> Speakup mailing list >>> Speakup@braille.uwo.ca >>> http://speech.braille.uwo.ca/mailman/listinfo/speakup >>> >> >> -- >> This message is subject to the CSIR's copyright terms and >> conditions, e-mail legal notice, and implemented Open Document >> Format (ODF) standard. The full disclaimer details can be found at >> http://www.csir.co.za/disclaimer.html. >> >> This message has been scanned for viruses and dangerous content by >> MailScanner, and is believed to be clean. >> >> _______________________________________________ >> Speakup mailing list >> Speakup@braille.uwo.ca >> http://speech.braille.uwo.ca/mailman/listinfo/speakup > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard. The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html. This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? ` Willem van der Walt @ ` Steve Holmes ` Steve Holmes 1 sibling, 0 replies; 8+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup On Fri, Sep 16, 2011 at 01:44:52PM +0200, Willem van der Walt wrote: > Hi Steve, > You should be able to get your Epson to scan using sane. > Is it USB? Yes. > What happens if you give the command: > scanimage -L > under the console in Linux? I get the following. Script started on Thu 22 Sep 2011 05:34:19 PM PDT steve@linlap ~$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). steve@linlap ~$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes. found USB scanner (vendor=0x04b8 [EPSON], product=0x013a [EPSON Scanner]) at libusb:001:002 libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/006/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/006/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/007/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/007/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/008/001: Permission denied. libusb requires write access to USB device nodes. libusb couldn't open USB device /dev/bus/usb/008/001: Permission denied. libusb requires write access to USB device nodes. # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. steve@linlap ~$ exit exit OK, I see that I should have done this as root. Anyway, I do know the USB connection is good because there were a couple lines showed up in dmesg but said nothing about a scanner; just that a new usb device was connected. Script done on Thu 22 Sep 2011 05:35:33 PM PDT ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? ` Willem van der Walt ` Steve Holmes @ ` Steve Holmes ` Willem van der Walt 1 sibling, 1 reply; 8+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup OK, I ran the two commands again as root and 'sane-find-scanner' yielded some interesting info but scanimage did not. See the typescript I included below. Script started on Thu 22 Sep 2011 05:48:19 PM PDT root@linlap ~# scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). root@linlap ~# sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8 [EPSON], product=0x013a [EPSON Scanner]) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. root@linlap ~# exit exit Script done on Thu 22 Sep 2011 05:51:02 PM PDT ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Socrates-and-An Easier OCR? ` Steve Holmes @ ` Willem van der Walt 0 siblings, 0 replies; 8+ messages in thread From: Willem van der Walt @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Hi, I had to change some things in /etc/sane*/somefile.conf, not epson, my epson uses another thing. I also had to extract some firmware from the windows driver, but it was all documented in the sane manuals. I did this so long ago that I am not exactly sure of what I had to do, but maybe it helps. Try googling for your model scanner and sane. HTH, Willem On Thu, 22 Sep 2011, Steve Holmes wrote: > OK, I ran the two commands again as root and 'sane-find-scanner' > yielded some interesting info but scanimage did not. See the > typescript I included below. > > Script started on Thu 22 Sep 2011 05:48:19 PM PDT > root@linlap ~# scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > root@linlap ~# sane-find-scanner > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make sure that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x04b8 [EPSON], product=0x013a [EPSON Scanner]) at libusb:001:002 > # Your USB scanner was (probably) detected. It may or may not be supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > # can't be detected by this program. > root@linlap ~# exit > exit > > Script done on Thu 22 Sep 2011 05:51:02 PM PDT > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard. The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html. This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Socrates-and-An Easier OCR? Hart Larry
` Kirk Reiser
` Willem van der Walt
` Steve Holmes
` Willem van der Walt
` Steve Holmes
` Steve Holmes
` Willem van der Walt
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).