public inbox for speakup@linux-speakup.org
 help / color / mirror / Atom feed
* Re: New Kernel with Speakup and ZIPSPEAK
   New Kernel with Speakup and ZIPSPEAK Dietmar Segbert
@  ` 'Georgina'
     ` Igor Gueths
  0 siblings, 1 reply; 4+ messages in thread
From: 'Georgina' @  UTC (permalink / raw)
  To: speakup

Hi

I can't remember if the default value is for MS DOS file system
supported or not.  I thought that it was.  Can you run make menuconfig?
This is a lot easier to quickly look and make changes.  If this was the
case, I thought that the error message would of stated such.  Could it be 
an error from incorrectly stating the root device on the loadlin 
commandline.  Although, I guess that it hasn't been changed.  But double
check that your loadlin line looks like something like this:

loadlin.exe \linux\vmlinuz-new root=/dev/hda1 ro

HTH

Gena



Blindness Advocacy and Self Help Online www.bashonline.org

>Hello,
>
>i use zipspeak ud want to compile a nwe kernel, so that all my hardware  
>ist installed.
>I have downloaded the kernel 2.4.188 an speakup-1.00.
>Then i have done the following steps:
>
>cd /usr/src
>rm -r speakup*
>rm -r linux*tar xzf speakup-1.00.tgz
>tar xzf linux-2.4.18.tgz
>cd speakup-1.00
>./install
>cd ../linux
>make mrproper
>make config (i have only done the steps for speakup)
>make dep
>make bzImage
>mv /vmlinuz /vmlinuz.old
>cp arch/i386/boot/bzImage /vmlinuz
>cp System.map /boot/system.map
>shutdown -r now
>
>I load linux with loadlin and not with lilo. lilo ist not on my harddisk.
>I have not become any errors during the compilation of the kernel. At the  
>end was only a warning: kernel ist to great for a floppydisk
>
>After rebooting i start linux with linux.bat form the dos-prompt. My apolo  
>speaks kernel 2.4.18 and so on. My hardware ist detected and then comes a  
>message:
>
>can not mount /root fs
>Kernel panik
>
>What can i do or does this kernel not work with Zipslack (zipslack)?
>
>Thanks.
>Dietmar
>
>_______________________________________________
>Speakup mailing list
>Speakup@braille.uwo.ca
>http://speech.braille.uwo.ca/mailman/listinfo/speakup


^ permalink raw reply	[flat|nested] 4+ messages in thread
* New Kernel with Speakup and ZIPSPEAK
@  Dietmar Segbert
   ` 'Georgina'
  0 siblings, 1 reply; 4+ messages in thread
From: Dietmar Segbert @  UTC (permalink / raw)
  To: speakup

Hello,

i use zipspeak ud want to compile a nwe kernel, so that all my hardware  
ist installed.
I have downloaded the kernel 2.4.188 an speakup-1.00.
Then i have done the following steps:

cd /usr/src
rm -r speakup*
rm -r linux*tar xzf speakup-1.00.tgz
tar xzf linux-2.4.18.tgz
cd speakup-1.00
./install
cd ../linux
make mrproper
make config (i have only done the steps for speakup)
make dep
make bzImage
mv /vmlinuz /vmlinuz.old
cp arch/i386/boot/bzImage /vmlinuz
cp System.map /boot/system.map
shutdown -r now

I load linux with loadlin and not with lilo. lilo ist not on my harddisk.
I have not become any errors during the compilation of the kernel. At the  
end was only a warning: kernel ist to great for a floppydisk

After rebooting i start linux with linux.bat form the dos-prompt. My apolo  
speaks kernel 2.4.18 and so on. My hardware ist detected and then comes a  
message:

can not mount /root fs
Kernel panik

What can i do or does this kernel not work with Zipslack (zipslack)?

Thanks.
Dietmar


^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: New Kernel with Speakup and ZIPSPEAK
   ` 'Georgina'
@    ` Igor Gueths
       ` 'Georgina'
  0 siblings, 1 reply; 4+ messages in thread
From: Igor Gueths @  UTC (permalink / raw)
  To: speakup

Hi. Another thing you can do is to do make oldconfig, and then edit the
.config file in the current directory as you wish. I had the same problem
with the kernel panic and not being able to mount the root filesystem. To
fix this, don't compile the driver that has support for only one ide
controller. This, in this case, would be /dev/ide0 is supported only. If
you are compiling a 2.4.18 or 2.4.17 kernel, the question will begin like:
"Please see /Documentation/ide.txt." Say n to this question, as this will
compile the driver that has support for multiple ide controllers. If you
have an ide floppy, hd, and Cdrom drive, you will have an ide0 and ide1.
This happens to be my setup as well. Hope this helps.

On Sun, 5 May 2002, 'Georgina' wrote:

> Hi
>
> I can't remember if the default value is for MS DOS file system
> supported or not.  I thought that it was.  Can you run make menuconfig?
> This is a lot easier to quickly look and make changes.  If this was the
> case, I thought that the error message would of stated such.  Could it be
> an error from incorrectly stating the root device on the loadlin
> commandline.  Although, I guess that it hasn't been changed.  But double
> check that your loadlin line looks like something like this:
>
> loadlin.exe \linux\vmlinuz-new root=/dev/hda1 ro
>
> HTH
>
> Gena
>
>
>
> Blindness Advocacy and Self Help Online www.bashonline.org
>
> >Hello,
> >
> >i use zipspeak ud want to compile a nwe kernel, so that all my hardware
> >ist installed.
> >I have downloaded the kernel 2.4.188 an speakup-1.00.
> >Then i have done the following steps:
> >
> >cd /usr/src
> >rm -r speakup*
> >rm -r linux*tar xzf speakup-1.00.tgz
> >tar xzf linux-2.4.18.tgz
> >cd speakup-1.00
> >./install
> >cd ../linux
> >make mrproper
> >make config (i have only done the steps for speakup)
> >make dep
> >make bzImage
> >mv /vmlinuz /vmlinuz.old
> >cp arch/i386/boot/bzImage /vmlinuz
> >cp System.map /boot/system.map
> >shutdown -r now
> >
> >I load linux with loadlin and not with lilo. lilo ist not on my harddisk.
> >I have not become any errors during the compilation of the kernel. At the
> >end was only a warning: kernel ist to great for a floppydisk
> >
> >After rebooting i start linux with linux.bat form the dos-prompt. My apolo
> >speaks kernel 2.4.18 and so on. My hardware ist detected and then comes a
> >message:
> >
> >can not mount /root fs
> >Kernel panik
> >
> >What can i do or does this kernel not work with Zipslack (zipslack)?
> >
> >Thanks.
> >Dietmar
> >
> >_______________________________________________
> >Speakup mailing list
> >Speakup@braille.uwo.ca
> >http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>



^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: New Kernel with Speakup and ZIPSPEAK
     ` Igor Gueths
@      ` 'Georgina'
  0 siblings, 0 replies; 4+ messages in thread
From: 'Georgina' @  UTC (permalink / raw)
  To: speakup

Hi

What a fool I am, I didn't read your message thoroughly.  You've missed
out make modules and make modules_install.  Having said which, you can't
modulise the drive driver that holds your root file system.

Just used the less command 'less .config' and the pertinent command you
need to observe is:

CONFIG_UMSDOS_FS is not set

Obviously, you want it set as being enabled.


Gena



Blindness Advocacy and Self Help Online www.bashonline.org

>Hi. Another thing you can do is to do make oldconfig, and then edit the
>.config file in the current directory as you wish. I had the same problem
>with the kernel panic and not being able to mount the root filesystem. To
>fix this, don't compile the driver that has support for only one ide
>controller. This, in this case, would be /dev/ide0 is supported only. If
>you are compiling a 2.4.18 or 2.4.17 kernel, the question will begin like:
>"Please see /Documentation/ide.txt." Say n to this question, as this will
>compile the driver that has support for multiple ide controllers. If you
>have an ide floppy, hd, and Cdrom drive, you will have an ide0 and ide1.
>This happens to be my setup as well. Hope this helps.
>
>On Sun, 5 May 2002, 'Georgina' wrote:
>
>> Hi
>>
>> I can't remember if the default value is for MS DOS file system
>> supported or not.  I thought that it was.  Can you run make menuconfig?
>> This is a lot easier to quickly look and make changes.  If this was the
>> case, I thought that the error message would of stated such.  Could it be
>> an error from incorrectly stating the root device on the loadlin
>> commandline.  Although, I guess that it hasn't been changed.  But double
>> check that your loadlin line looks like something like this:
>>
>> loadlin.exe \linux\vmlinuz-new root=/dev/hda1 ro
>>
>> HTH
>>
>> Gena
>>
>>
>>
>> Blindness Advocacy and Self Help Online www.bashonline.org
>>
>> >Hello,
>> >
>> >i use zipspeak ud want to compile a nwe kernel, so that all my hardware
>> >ist installed.
>> >I have downloaded the kernel 2.4.188 an speakup-1.00.
>> >Then i have done the following steps:
>> >
>> >cd /usr/src
>> >rm -r speakup*
>> >rm -r linux*tar xzf speakup-1.00.tgz
>> >tar xzf linux-2.4.18.tgz
>> >cd speakup-1.00
>> >./install
>> >cd ../linux
>> >make mrproper
>> >make config (i have only done the steps for speakup)
>> >make dep
>> >make bzImage
>> >mv /vmlinuz /vmlinuz.old
>> >cp arch/i386/boot/bzImage /vmlinuz
>> >cp System.map /boot/system.map
>> >shutdown -r now
>> >
>> >I load linux with loadlin and not with lilo. lilo ist not on my harddisk.
>> >I have not become any errors during the compilation of the kernel. At the
>> >end was only a warning: kernel ist to great for a floppydisk
>> >
>> >After rebooting i start linux with linux.bat form the dos-prompt. My apolo
>> >speaks kernel 2.4.18 and so on. My hardware ist detected and then comes a
>> >message:
>> >
>> >can not mount /root fs
>> >Kernel panik
>> >
>> >What can i do or does this kernel not work with Zipslack (zipslack)?
>> >
>> >Thanks.
>> >Dietmar
>> >
>> >_______________________________________________
>> >Speakup mailing list
>> >Speakup@braille.uwo.ca
>> >http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>
>
>_______________________________________________
>Speakup mailing list
>Speakup@braille.uwo.ca
>http://speech.braille.uwo.ca/mailman/listinfo/speakup


^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~ UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
 New Kernel with Speakup and ZIPSPEAK Dietmar Segbert
 ` 'Georgina'
   ` Igor Gueths
     ` 'Georgina'

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).