* thanks and success @ poehlman ` Victor Tsaran 0 siblings, 1 reply; 19+ messages in thread From: poehlman @ UTC (permalink / raw) To: speakup of course I have a question too. Thanks to those who helped me get up and running. I tried to send this out earlier with a different question which I have solved but I am thrilled to be using zipspeak even though it is a stripped down version of slackware running on umsdos. my question is has anyone used freeamp and how do you use it? I have it installed and got some errors but need to know how to get it to look for a song etc? Thanks! -- Linux Rocks!!!! ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success thanks and success poehlman @ ` Victor Tsaran ` Dumb question (was Re: thanks and success) Joseph Norton ` (2 more replies) 0 siblings, 3 replies; 19+ messages in thread From: Victor Tsaran @ UTC (permalink / raw) To: poehlman; +Cc: speakup Hi, David! You have to be aware o of the fact that Freeamp does not substitute Winamp, unfortunately. Yes, there is some initial error at startup, which says that you don't have ALSA installed or something like that. If you have more errors, it might be due to the fact that you don't have certain necesary libraries installed. Please quote the errors. Otherwise, Freeamp's usage is very simple: freeamp [whatever] Unfortunately, there is no way to have ACB Radio play automatically from a web browser. The reason for that is that .pls files are sent as a straight textand you cannot tell Linux to treat it otherwise. So, what one of the listers suggested is to save .pls files with Lynx and then load them with Freeamp on the command line. It works pretty fine. Regards, Vic ^ permalink raw reply [flat|nested] 19+ messages in thread
* Dumb question (was Re: thanks and success) ` Victor Tsaran @ ` Joseph Norton ` Jacob Schmude ` Victor Tsaran ` thanks and success Geoff Shang ` Kerry Hoath 2 siblings, 2 replies; 19+ messages in thread From: Joseph Norton @ UTC (permalink / raw) To: speakup Now, this is a dumb question. Why can't you go into lynx.cfg and tell lynx what to do with the file using the suffix: field. -- Anything that is good and useful is made of chocolate. On Tue, 23 May 2000, Victor Tsaran wrote: <snip> > Unfortunately, there is no way to have ACB Radio play automatically from a > web browser. The reason for that is that .pls files are sent as a straight > textand you cannot tell Linux to treat it otherwise. So, what one of the > listers suggested is to save .pls files with Lynx and then load them with > Freeamp on the command line. It works pretty fine. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Dumb question (was Re: thanks and success) ` Dumb question (was Re: thanks and success) Joseph Norton @ ` Jacob Schmude ` Victor Tsaran 1 sibling, 0 replies; 19+ messages in thread From: Jacob Schmude @ UTC (permalink / raw) To: speakup Easy answer: Lynx also requires a mime type for it's suffixes. So, even if you defined it there, it still wouldn't play, the mime type still would not be recognized. I asked ACB radio to add a mime type for those files, but they said they'd need to ask the ISP they're running on. Apparently, they didn't get far, I've seen no mime type added. As an alternative, you might want to go to www.linux-speakup.org and use the acb radio link they've provided for the mainstream, they've got the mime type: audio/x-scpls defined and you just need to set that type up to be used with freeamp. This still won't allow m3u files from acb radio to be played, however. You'll still need to download and save them, then run freeamp on them. On Tue, 23 May 2000, Joseph Norton wrote: > Now, this is a dumb question. > > Why can't you go into lynx.cfg and tell lynx what to do with the file > using the suffix: field. > > -- > Anything that is good and useful is made of chocolate. > > On Tue, 23 May 2000, Victor Tsaran wrote: > > <snip> > > Unfortunately, there is no way to have ACB Radio play automatically from a > > web browser. The reason for that is that .pls files are sent as a straight > > textand you cannot tell Linux to treat it otherwise. So, what one of the > > listers suggested is to save .pls files with Lynx and then load them with > > Freeamp on the command line. It works pretty fine. > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > Jacob Schmude mailto:jacobs@ncinter.net ICQ: 53401220 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Dumb question (was Re: thanks and success) ` Dumb question (was Re: thanks and success) Joseph Norton ` Jacob Schmude @ ` Victor Tsaran 1 sibling, 0 replies; 19+ messages in thread From: Victor Tsaran @ UTC (permalink / raw) To: speakup Because I want it to be global. What if I use Emacs/W3 browser? Regards, V ----- Original Message ----- From: "Joseph Norton" <jnorton@nortcom.com> To: <speakup@braille.uwo.ca> Sent: Tuesday, May 23, 2000 7:27 PM Subject: Dumb question (was Re: thanks and success) > Now, this is a dumb question. > > Why can't you go into lynx.cfg and tell lynx what to do with the file > using the suffix: field. > > -- > Anything that is good and useful is made of chocolate. > > On Tue, 23 May 2000, Victor Tsaran wrote: > > <snip> > > Unfortunately, there is no way to have ACB Radio play automatically from a > > web browser. The reason for that is that .pls files are sent as a straight > > textand you cannot tell Linux to treat it otherwise. So, what one of the > > listers suggested is to save .pls files with Lynx and then load them with > > Freeamp on the command line. It works pretty fine. > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Victor Tsaran ` Dumb question (was Re: thanks and success) Joseph Norton @ ` Geoff Shang ` Joseph Norton ` Kerry Hoath 2 siblings, 1 reply; 19+ messages in thread From: Geoff Shang @ UTC (permalink / raw) To: speakup; +Cc: poehlman Hi: Actually, you can get it to play pls files from the website, though I haven't tested it thoroughly. You need to have the pls extention in mime.types as follows: audio/scpls pls Then as long as you have a corrisponding entry in mailcap, it should work. Here's my mailcap entry: audio/scpls; freeamp %s You'll probably want to do the same with audio/x-scpls. Wh;y there are 2 types is beyond me. Probably the best way to deal with this is to get the mailcapstuff.tar.gz file from ftp.braille.uwo.ca. I think it's in /pub/linux/goodies but I'm sure someone will correct me if I'm wrong. Just unpack it into your home directory. This will place two files there, .mime.types and .mailcap which will compliment the equivalents in /etc. Geoff. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` thanks and success Geoff Shang @ ` Joseph Norton 0 siblings, 0 replies; 19+ messages in thread From: Joseph Norton @ UTC (permalink / raw) To: Geoff Shang; +Cc: speakup, poehlman Why couldn't you use the suffix and viewer fields in lynx.cfg as well? The only reason I can think of for doing it the other way would be to have the suffix and files recognized by other applications, but, guess there's more than one way to skin a cat. -- Anything that is good and useful is made of chocolate. On Wed, 24 May 2000, Geoff Shang wrote: > Hi: > > Actually, you can get it to play pls files from the website, though I > haven't tested it thoroughly. You need to have the pls extention in > mime.types as follows: > > audio/scpls pls > > Then as long as you have a corrisponding entry in mailcap, it should > work. Here's my mailcap entry: > > audio/scpls; freeamp %s > > You'll probably want to do the same with audio/x-scpls. Wh;y there are 2 > types is beyond me. > > Probably the best way to deal with this is to get the mailcapstuff.tar.gz > file from ftp.braille.uwo.ca. I think it's in /pub/linux/goodies but I'm > sure someone will correct me if I'm wrong. Just unpack it into your home > directory. This will place two files there, .mime.types and .mailcap which > will compliment the equivalents in /etc. > > > Geoff. > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Victor Tsaran ` Dumb question (was Re: thanks and success) Joseph Norton ` thanks and success Geoff Shang @ ` Kerry Hoath ` Kirk Reiser ` David Poehlman 2 siblings, 2 replies; 19+ messages in thread From: Kerry Hoath @ UTC (permalink / raw) To: speakup Uh hang on a sec, you can map different file extentions with the lynx.cfg and you can define a download method to play the file in the lynx.cfg. Regarding your alsa messages, just remove the alsa.cmo plugin from /usr/local/share/freeammp/plugins/ directory or somewhere. If anyone wants me to come up with the magic lynx.cfg guff for .pls files ask nicely and I'll see what I can do <g> Regards, Kerry. On Tue, May 23, 2000 at 08:52:45PM -0400, Victor Tsaran wrote: > Hi, David! > You have to be aware o of the fact that Freeamp does not substitute > Winamp, unfortunately. Yes, there is some initial error at startup, which > says that you don't have ALSA installed or something like that. If you > have more errors, it might be due to the fact that you don't have certain > necesary libraries installed. Please quote the errors. Otherwise, > Freeamp's usage is very simple: > > freeamp [whatever] > > Unfortunately, there is no way to have ACB Radio play automatically from a > web browser. The reason for that is that .pls files are sent as a straight > textand you cannot tell Linux to treat it otherwise. So, what one of the > listers suggested is to save .pls files with Lynx and then load them with > Freeamp on the command line. It works pretty fine. > Regards, > Vic > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- -- Kerry Hoath: kerry@gotss.eu.org Alternates: kerry@emusys.com.au kerry@gotss.spice.net.au or khoath@lis.net.au ICQ UIN: 8226547 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Kerry Hoath @ ` Kirk Reiser ` David Poehlman 1 sibling, 0 replies; 19+ messages in thread From: Kirk Reiser @ UTC (permalink / raw) To: speakup There is a simple little tar ball in the goodies directory that I created with a .mailcap and a .mime.types files in them which will make lynx use most of the standard extensions correctly. The mailcap currently is set up for freeamp, aplay and trplayer, Matt's command line real audio player. You can edit that file to change the various players to suit your system. Kirk -- Kirk Reiser The Computer Braille Facility e-mail: kirk@braille.uwo.ca University of Western Ontario phone: (519) 661-3061 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Kerry Hoath ` Kirk Reiser @ ` David Poehlman ` Kirk Reiser ` Janina Sajka 1 sibling, 2 replies; 19+ messages in thread From: David Poehlman @ UTC (permalink / raw) To: speakup it seems as though freeamp does not automatically detect my sound card. the file plays but nothing happens auditorially. -- Hands-On Technolog(eye)s ftp://poehlman.clark.net http://poehlman.clark.net mailto:poehlman@clark.net voice 301-949-7599 end sig. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman @ ` Kirk Reiser ` David Poehlman ` Janina Sajka 1 sibling, 1 reply; 19+ messages in thread From: Kirk Reiser @ UTC (permalink / raw) To: speakup David Poehlman <poehlman@clark.net> writes: > it seems as though freeamp does not automatically detect my sound card. the > file plays but nothing happens auditorially. Hi Dave: Are you using the ALSA drivers? If so, it might not be playing because you either haven't set up the mixer or have run alsactl restore to set the setting after a boot. Freeamp doesn't actually look for the card it just writes to the /dev/dsp sound device. Kirk -- Kirk Reiser The Computer Braille Facility e-mail: kirk@braille.uwo.ca University of Western Ontario phone: (519) 661-3061 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Kirk Reiser @ ` David Poehlman ` Kirk Reiser 0 siblings, 1 reply; 19+ messages in thread From: David Poehlman @ UTC (permalink / raw) To: speakup No, I have done nothing but install and run freeamp. didn't know how to configure sound drivers. Thanks! Kirk Reiser wrote: > > David Poehlman <poehlman@clark.net> writes: > > > it seems as though freeamp does not automatically detect my sound card. the > > file plays but nothing happens auditorially. > > Hi Dave: Are you using the ALSA drivers? If so, it might not be > playing because you either haven't set up the mixer or have run > alsactl restore to set the setting after a boot. Freeamp doesn't > actually look for the card it just writes to the /dev/dsp sound > device. > > Kirk > > -- > > Kirk Reiser The Computer Braille Facility > e-mail: kirk@braille.uwo.ca University of Western Ontario > phone: (519) 661-3061 > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Hands-On Technolog(eye)s ftp://poehlman.clark.net http://poehlman.clark.net mailto:poehlman@clark.net voice 301-949-7599 end sig. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman @ ` Kirk Reiser ` David Poehlman 0 siblings, 1 reply; 19+ messages in thread From: Kirk Reiser @ UTC (permalink / raw) To: speakup Hmmm, then it depends which distribution you are using whether the sound drivers are included by default. I suspect they may not be. Kirk -- Kirk Reiser The Computer Braille Facility e-mail: kirk@braille.uwo.ca University of Western Ontario phone: (519) 661-3061 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Kirk Reiser @ ` David Poehlman ` Jacob Schmude ` Victor Tsaran 0 siblings, 2 replies; 19+ messages in thread From: David Poehlman @ UTC (permalink / raw) To: speakup I'm using zipspeak. Kirk Reiser wrote: > > Hmmm, then it depends which distribution you are using whether the > sound drivers are included by default. I suspect they may not be. > > Kirk > > -- > > Kirk Reiser The Computer Braille Facility > e-mail: kirk@braille.uwo.ca University of Western Ontario > phone: (519) 661-3061 > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Hands-On Technolog(eye)s ftp://poehlman.clark.net http://poehlman.clark.net mailto:poehlman@clark.net voice 301-949-7599 end sig. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman @ ` Jacob Schmude ` David Poehlman ` Victor Tsaran 1 sibling, 1 reply; 19+ messages in thread From: Jacob Schmude @ UTC (permalink / raw) To: speakup You have the sound drivers, they're not loaded, though. The included sound drivers are the OSS/Free drivers, and fairly primative. They'll work fine for basic sound playing, though. What sound card do you have? If you've got an SB live, you'll need to install the ALSA sound drivers. Even if your card is supported by the included drivers, the ALSA ones are better anyway. If your sound card is plug and play, there's another problem. If you're not technically inclined, it'll be rather hard to set up plug and play. This would be another reason to get ALSA sound drivers, as they have plug and play built in. Most ISA sound cards are plug and play. If the card is PCI and is plug and play, I don't know how it works for setting that up. Plug and play just means auto-setting up of IRQs and such parameters, so you don't have to change dip switches or jumper blocks on the card. On Thu, 25 May 2000, David Poehlman wrote: > I'm using zipspeak. > > Kirk Reiser wrote: > > > > Hmmm, then it depends which distribution you are using whether the > > sound drivers are included by default. I suspect they may not be. > > > > Kirk > > > > -- > > > > Kirk Reiser The Computer Braille Facility > > e-mail: kirk@braille.uwo.ca University of Western Ontario > > phone: (519) 661-3061 > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > Hands-On Technolog(eye)s > ftp://poehlman.clark.net > http://poehlman.clark.net > mailto:poehlman@clark.net > voice 301-949-7599 > end sig. > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > Jacob Schmude mailto:jacobs@ncinter.net ICQ: 53401220 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` Jacob Schmude @ ` David Poehlman ` Jacob Schmude 0 siblings, 1 reply; 19+ messages in thread From: David Poehlman @ UTC (permalink / raw) To: speakup my soundcard is built into the mother board. it is a crystal sound card which I don't know much about I'll admit but if someone would provide me with instructions, I could probably follow them. Thanks! Jacob Schmude wrote: > > You have the sound drivers, they're not loaded, though. The > included sound drivers are the OSS/Free drivers, and fairly > primative. They'll work fine for basic sound playing, though. What sound > card do you have? If you've got an SB live, you'll need to install the > ALSA sound drivers. Even if your card is supported by the included > drivers, the ALSA ones are better anyway. > If your sound card is plug and play, there's another problem. If > you're not technically inclined, it'll be rather hard to set up plug and > play. This would be another reason to get ALSA sound drivers, as they have > plug and play built in. Most ISA sound cards are plug and play. If the > card is PCI and is plug and play, I don't know how it works for setting > that up. Plug and play just means auto-setting up of IRQs and such > parameters, so you don't have to change dip switches or jumper blocks on > the card. > > On Thu, 25 May 2000, David Poehlman wrote: > > > I'm using zipspeak. > > > > Kirk Reiser wrote: > > > > > > Hmmm, then it depends which distribution you are using whether the > > > sound drivers are included by default. I suspect they may not be. > > > > > > Kirk > > > > > > -- > > > > > > Kirk Reiser The Computer Braille Facility > > > e-mail: kirk@braille.uwo.ca University of Western Ontario > > > phone: (519) 661-3061 > > > > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@braille.uwo.ca > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > -- > > Hands-On Technolog(eye)s > > ftp://poehlman.clark.net > > http://poehlman.clark.net > > mailto:poehlman@clark.net > > voice 301-949-7599 > > end sig. > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > Jacob Schmude > mailto:jacobs@ncinter.net > ICQ: 53401220 > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Hands-On Technolog(eye)s ftp://poehlman.clark.net http://poehlman.clark.net mailto:poehlman@clark.net voice 301-949-7599 end sig. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman @ ` Jacob Schmude 0 siblings, 0 replies; 19+ messages in thread From: Jacob Schmude @ UTC (permalink / raw) To: speakup There are a few models of crystal sound cards. As far as I can tell, the included drivers only support the cs-4232 model. Try: modprobe cs4232 and try playing something. Do the modprobe as root, see if you get sounds. While loading the module, no output should be generated. If it is, and it says something like: device or resource busy then you probably don't have the right model. I know the ALSA drivers support a wider range of crystal cards, but I myself use a sound blaster 16, so I wouldn't be the one to tell you how well the crystal cards work. The models that ALSA supports are: cs-4231, cs-4232, cs-4236, and cs-461x. If you can't load the included driver with your card, you may need ALSA. Hopefully, they didn't make it a windows-only card. If they did somehow, you're out of luck. On Thu, 25 May 2000, David Poehlman wrote: > my soundcard is built into the mother board. it is a crystal sound card > which I don't know much about I'll admit but if someone would provide me > with instructions, I could probably follow them. > Thanks! > > Jacob Schmude wrote: > > > > You have the sound drivers, they're not loaded, though. The > > included sound drivers are the OSS/Free drivers, and fairly > > primative. They'll work fine for basic sound playing, though. What sound > > card do you have? If you've got an SB live, you'll need to install the > > ALSA sound drivers. Even if your card is supported by the included > > drivers, the ALSA ones are better anyway. > > If your sound card is plug and play, there's another problem. If > > you're not technically inclined, it'll be rather hard to set up plug and > > play. This would be another reason to get ALSA sound drivers, as they have > > plug and play built in. Most ISA sound cards are plug and play. If the > > card is PCI and is plug and play, I don't know how it works for setting > > that up. Plug and play just means auto-setting up of IRQs and such > > parameters, so you don't have to change dip switches or jumper blocks on > > the card. > > > > On Thu, 25 May 2000, David Poehlman wrote: > > > > > I'm using zipspeak. > > > > > > Kirk Reiser wrote: > > > > > > > > Hmmm, then it depends which distribution you are using whether the > > > > sound drivers are included by default. I suspect they may not be. > > > > > > > > Kirk > > > > > > > > -- > > > > > > > > Kirk Reiser The Computer Braille Facility > > > > e-mail: kirk@braille.uwo.ca University of Western Ontario > > > > phone: (519) 661-3061 > > > > > > > > _______________________________________________ > > > > Speakup mailing list > > > > Speakup@braille.uwo.ca > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > -- > > > Hands-On Technolog(eye)s > > > ftp://poehlman.clark.net > > > http://poehlman.clark.net > > > mailto:poehlman@clark.net > > > voice 301-949-7599 > > > end sig. > > > > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@braille.uwo.ca > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > > Jacob Schmude > > mailto:jacobs@ncinter.net > > ICQ: 53401220 > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > Hands-On Technolog(eye)s > ftp://poehlman.clark.net > http://poehlman.clark.net > mailto:poehlman@clark.net > voice 301-949-7599 > end sig. > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > Jacob Schmude mailto:jacobs@ncinter.net ICQ: 53401220 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman ` Jacob Schmude @ ` Victor Tsaran 1 sibling, 0 replies; 19+ messages in thread From: Victor Tsaran @ UTC (permalink / raw) To: speakup What card? V ----- Original Message ----- From: "David Poehlman" <poehlman@clark.net> To: <speakup@braille.uwo.ca> Sent: Thursday, May 25, 2000 10:04 AM Subject: Re: thanks and success > I'm using zipspeak. > > Kirk Reiser wrote: > > > > Hmmm, then it depends which distribution you are using whether the > > sound drivers are included by default. I suspect they may not be. > > > > Kirk > > > > -- > > > > Kirk Reiser The Computer Braille Facility > > e-mail: kirk@braille.uwo.ca University of Western Ontario > > phone: (519) 661-3061 > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > Hands-On Technolog(eye)s > ftp://poehlman.clark.net > http://poehlman.clark.net > mailto:poehlman@clark.net > voice 301-949-7599 > end sig. > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: thanks and success ` David Poehlman ` Kirk Reiser @ ` Janina Sajka 1 sibling, 0 replies; 19+ messages in thread From: Janina Sajka @ UTC (permalink / raw) To: speakup At some point in the discussions about zipspeak it becomes useful to recognize that zipspeak is a guest OS inside a host OS. The meaning in this recognition may be that all services may not be available that would be in a native environment. At least, it is reasonable to consider this possibility. In fact, I'd say this is a probability and not merely a possibility. On Thu, 25 May 2000, David Poehlman wrote: > it seems as though freeamp does not automatically detect my sound card. the > file plays but nothing happens auditorially. > > -- Janina Sajka, Director Information Systems Research & Development American Foundation for the Blind (AFB) janina@afb.net ^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
thanks and success poehlman
` Victor Tsaran
` Dumb question (was Re: thanks and success) Joseph Norton
` Jacob Schmude
` Victor Tsaran
` thanks and success Geoff Shang
` Joseph Norton
` Kerry Hoath
` Kirk Reiser
` David Poehlman
` Kirk Reiser
` David Poehlman
` Kirk Reiser
` David Poehlman
` Jacob Schmude
` David Poehlman
` Jacob Schmude
` Victor Tsaran
` Janina Sajka
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).