* Changing keymap on Debian Squeeze
@ Øyvind Lode - Forums
` Jean-Philippe MENGUAL
0 siblings, 1 reply; 6+ messages in thread
From: Øyvind Lode - Forums @ UTC (permalink / raw)
To: Speakup
Hi:
I have booted up the Debian Squeeze espeakup enabled image.
I can't hear Speakup.
But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
How can I change the keymap when running in this environment?
Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Changing keymap on Debian Squeeze
Changing keymap on Debian Squeeze Øyvind Lode - Forums
@ ` Jean-Philippe MENGUAL
` Øyvind Lode - Forums
0 siblings, 1 reply; 6+ messages in thread
From: Jean-Philippe MENGUAL @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
Hi,
Check available keyboards in /usr/share/keymaps. Maybe your keyboard is
"no-latin1" or something else. You need enter the name of the .kmap.gz.
Regards,
Jean-Philippe MENGUAL
Le dimanche 08 mai 2011 à 17:29 +0000, Øyvind Lode - Forums a écrit :
> Hi:
>
> I have booted up the Debian Squeeze espeakup enabled image.
> I can't hear Speakup.
> But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
>
> I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
> I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
>
> How can I change the keymap when running in this environment?
>
> Thanks!
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: Changing keymap on Debian Squeeze
` Jean-Philippe MENGUAL
@ ` Øyvind Lode - Forums
` Jean-Philippe MENGUAL
0 siblings, 1 reply; 6+ messages in thread
From: Øyvind Lode - Forums @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
Hi:
Both no and no-latin1 is present in /usr/share/keymaps.
I got someone to look at the screen and when I try to run "loadkeys no" or "loadkeys no-latin" loadkeys exits with:
The gzip not found.
The gzip command is not present.
It's impossible to install/configure the system without the proper keymap loaded.
-----Original Message-----
From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
Sent: 8. mai 2011 19:32
To: Speakup is a screen review system for Linux.
Subject: Re: Changing keymap on Debian Squeeze
Hi,
Check available keyboards in /usr/share/keymaps. Maybe your keyboard is
"no-latin1" or something else. You need enter the name of the .kmap.gz.
Regards,
Jean-Philippe MENGUAL
Le dimanche 08 mai 2011 à 17:29 +0000, Øyvind Lode - Forums a écrit :
> Hi:
>
> I have booted up the Debian Squeeze espeakup enabled image.
> I can't hear Speakup.
> But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
>
> I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
> I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
>
> How can I change the keymap when running in this environment?
>
> Thanks!
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: Changing keymap on Debian Squeeze
` Øyvind Lode - Forums
@ ` Jean-Philippe MENGUAL
` Øyvind Lode - Forums
0 siblings, 1 reply; 6+ messages in thread
From: Jean-Philippe MENGUAL @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
load no must be done as root. Did you do that? gzip is useless. It was
only a piece of info to give you what should look the name of your
keyboard.
Jean-Philippe MENGUAL
Le dimanche 08 mai 2011 à 17:51 +0000, Øyvind Lode - Forums a écrit :
> Hi:
>
> Both no and no-latin1 is present in /usr/share/keymaps.
> I got someone to look at the screen and when I try to run "loadkeys no" or "loadkeys no-latin" loadkeys exits with:
> The gzip not found.
> The gzip command is not present.
> It's impossible to install/configure the system without the proper keymap loaded.
>
> -----Original Message-----
> From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
> Sent: 8. mai 2011 19:32
> To: Speakup is a screen review system for Linux.
> Subject: Re: Changing keymap on Debian Squeeze
>
> Hi,
>
> Check available keyboards in /usr/share/keymaps. Maybe your keyboard is
> "no-latin1" or something else. You need enter the name of the .kmap.gz.
>
> Regards,
>
> Jean-Philippe MENGUAL
>
>
> Le dimanche 08 mai 2011 à 17:29 +0000, Øyvind Lode - Forums a écrit :
> > Hi:
> >
> > I have booted up the Debian Squeeze espeakup enabled image.
> > I can't hear Speakup.
> > But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
> >
> > I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
> > I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
> >
> > How can I change the keymap when running in this environment?
> >
> > Thanks!
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: Changing keymap on Debian Squeeze
` Jean-Philippe MENGUAL
@ ` Øyvind Lode - Forums
` Øyvind Lode - Forums
0 siblings, 1 reply; 6+ messages in thread
From: Øyvind Lode - Forums @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
I'm root.
Loadkeys works as expected when I test it on a running installation of Debian 5.0 "lenny" but not when I boot the espeakup enabled Squeeze image.
I loaded the US keymap on my running system and were able to find what key is mapped to what.
I then tried to get Speakup talking on the Squeeze installation but still noe audio.
So I can't get the Squeeze image to talk (software speech) and I can't load the correct keymap.
If I boot the same machine with Arch or even GRML I hear Speakup and loadkeys works as well of course.
-----Original Message-----
From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
Sent: 8. mai 2011 19:55
To: Speakup is a screen review system for Linux.
Subject: RE: Changing keymap on Debian Squeeze
load no must be done as root. Did you do that? gzip is useless. It was
only a piece of info to give you what should look the name of your
keyboard.
Jean-Philippe MENGUAL
Le dimanche 08 mai 2011 à 17:51 +0000, Øyvind Lode - Forums a écrit :
> Hi:
>
> Both no and no-latin1 is present in /usr/share/keymaps.
> I got someone to look at the screen and when I try to run "loadkeys no" or "loadkeys no-latin" loadkeys exits with:
> The gzip not found.
> The gzip command is not present.
> It's impossible to install/configure the system without the proper keymap loaded.
>
> -----Original Message-----
> From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
> Sent: 8. mai 2011 19:32
> To: Speakup is a screen review system for Linux.
> Subject: Re: Changing keymap on Debian Squeeze
>
> Hi,
>
> Check available keyboards in /usr/share/keymaps. Maybe your keyboard is
> "no-latin1" or something else. You need enter the name of the .kmap.gz.
>
> Regards,
>
> Jean-Philippe MENGUAL
>
>
> Le dimanche 08 mai 2011 à 17:29 +0000, Øyvind Lode - Forums a écrit :
> > Hi:
> >
> > I have booted up the Debian Squeeze espeakup enabled image.
> > I can't hear Speakup.
> > But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
> >
> > I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
> > I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
> >
> > How can I change the keymap when running in this environment?
> >
> > Thanks!
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: Changing keymap on Debian Squeeze
` Øyvind Lode - Forums
@ ` Øyvind Lode - Forums
0 siblings, 0 replies; 6+ messages in thread
From: Øyvind Lode - Forums @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
Ok, I just got the info that I can only change the keymap from the main menu on VT 1.
Kinda hard to do with no speech...
-----Original Message-----
From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Øyvind Lode - Forums
Sent: 8. mai 2011 20:41
To: Speakup is a screen review system for Linux.
Subject: RE: Changing keymap on Debian Squeeze
I'm root.
Loadkeys works as expected when I test it on a running installation of Debian 5.0 "lenny" but not when I boot the espeakup enabled Squeeze image.
I loaded the US keymap on my running system and were able to find what key is mapped to what.
I then tried to get Speakup talking on the Squeeze installation but still noe audio.
So I can't get the Squeeze image to talk (software speech) and I can't load the correct keymap.
If I boot the same machine with Arch or even GRML I hear Speakup and loadkeys works as well of course.
-----Original Message-----
From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
Sent: 8. mai 2011 19:55
To: Speakup is a screen review system for Linux.
Subject: RE: Changing keymap on Debian Squeeze
load no must be done as root. Did you do that? gzip is useless. It was
only a piece of info to give you what should look the name of your
keyboard.
Jean-Philippe MENGUAL
Le dimanche 08 mai 2011 à 17:51 +0000, Øyvind Lode - Forums a écrit :
> Hi:
>
> Both no and no-latin1 is present in /usr/share/keymaps.
> I got someone to look at the screen and when I try to run "loadkeys no" or "loadkeys no-latin" loadkeys exits with:
> The gzip not found.
> The gzip command is not present.
> It's impossible to install/configure the system without the proper keymap loaded.
>
> -----Original Message-----
> From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Jean-Philippe MENGUAL
> Sent: 8. mai 2011 19:32
> To: Speakup is a screen review system for Linux.
> Subject: Re: Changing keymap on Debian Squeeze
>
> Hi,
>
> Check available keyboards in /usr/share/keymaps. Maybe your keyboard is
> "no-latin1" or something else. You need enter the name of the .kmap.gz.
>
> Regards,
>
> Jean-Philippe MENGUAL
>
>
> Le dimanche 08 mai 2011 à 17:29 +0000, Øyvind Lode - Forums a écrit :
> > Hi:
> >
> > I have booted up the Debian Squeeze espeakup enabled image.
> > I can't hear Speakup.
> > But I have a hard time after switching to virtual console 2 to have a try at configuring amixer.
> >
> > I tried "loadkeys no" (which is the method I use on Arch) to load the Norwegian keymap but it doesn't work.
> > I also tried "dpkg-reconfigure console-data" but that did not work either from the installation ISO.
> >
> > How can I change the keymap when running in this environment?
> >
> > Thanks!
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Changing keymap on Debian Squeeze Øyvind Lode - Forums
` Jean-Philippe MENGUAL
` Øyvind Lode - Forums
` Jean-Philippe MENGUAL
` Øyvind Lode - Forums
` Øyvind Lode - Forums
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).