stopping vsftpd

stopping vsftpd

[Glenn at home]

Hello group,
I could use some suggestions on stopping VSFTPD.
I have tried sbin/service vsftpd stop
and that does not work.
I am using Debian.
There seems to be no service command in Debian.
Any ideas?
thanks.

Re: stopping vsftpd

[Luke Yelavich]

On Fri, Feb 18, 2005 at 02:41:18PM EST, Glenn at home wrote:
> Hello group,
> I could use some suggestions on stopping VSFTPD.
> I have tried sbin/service vsftpd stop
> and that does not work.
> I am using Debian.
> There seems to be no service command in Debian.

As root, you simply run the scripts in /etc/init.d directly, so it would 
be:

# /etc/init.d/vsftpd stop

Hope this helps.

Luke
k

Re: stopping vsftpd

[Lorenzo Taylor]

In Debian, you start and stop services by typing

/etc/init.d/<service-name> start|stop|restart

So to stop vsftpd, you would type:

/etc/init.c/vsftpd stop

Lorenzo

Re: stopping vsftpd

[Lorenzo Taylor]

Lorenzo Taylor's comments on Re: stopping vsftpd were as follows:
# /etc/init.c/vsftpd stop

Oops.  Slip of the finger. ;-)  It should have said:

/etc/init.d/vsftpd stop

Sorry for the wrong letter.  I know it means the world to a computer. :)

Lorenzo

Re: stopping vsftpd

[Joseph C. Lininger]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Well, calling the boot script for vsftpd with the stop argument should 
do the trick. Alternatively, you can send a TERM signal using killall if 
you really need to stop the process.

Marriage (N): An arrangement which usually results in twice the amount 
of arguing and half the amount of sex.
Joseph C. Lininger
jbahm@pcdesk.net
Verification: 5eab38a77ac40416e075be8f50607ff7


And so it came to pass that on Thu, 17 Feb 2005, Glenn at home said

> Hello group,
> I could use some suggestions on stopping VSFTPD.
> I have tried sbin/service vsftpd stop
> and that does not work.
> I am using Debian.
> There seems to be no service command in Debian.
> Any ideas?
> thanks.
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFCFYOCJ6dqn0mqPbARAph5AJ9RZLrC6TDL6sZ+6BW88jPxdkYUJwCg2gn8
KjNEtc8Hc7fxavAPemx9tgk=
=Tr4T
-----END PGP SIGNATURE-----

Re: stopping vsftpd

[Glenn at home]

I do have the init.d, just no .c.
And the vsftpd command does not work in the init.d directory, even though 
vsftpd is there.
But I did killall, and now it stops on boot-up, with some kind of message 
I'll have to remember it and look it up.
I think it was 3 letters and a colon.
But I press enter, and then I get to the login prompt.
So I uninstalled vsftpd, and I still have the same problem during boot-up.
Now when I try and re-install, or install anything, I hear it trying to 
download from kernel.org and it will not go past 0%.
Glenn
----- Original Message ----- 
From: "Joseph C. Lininger" <jbahm@pcdesk.net>
To: "Glenn at home" <GlennErvin@cableone.net>
Sent: Friday, February 18, 2005 10:49 PM
Subject: Re: stopping vsftpd


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You shouldn't have a directory called /etc/init.c, but you should have
one called /etc/init.d. This is where the boot scripts are stored. If
you can't find them there, have a look in /etc/rc.d.

Marriage (N): An arrangement which usually results in twice the amount
of arguing and half the amount of sex.
Joseph C. Lininger
jbahm@pcdesk.net
Verification: 5eab38a77ac40416e075be8f50607ff7


And so it came to pass that on Fri, 18 Feb 2005, Glenn at home said

> killall vsftpd
> seems to have done it, the other previous commands did not seem to work 
> for
> some reason.
> What did not work:
> /etc/init.d/vsftpd stop
> or
> etc/init.c/vsftpd stop
> There seems to be no init.c directory in my system.
> Anyway, now that it is apparently stopped, I can run vsftpd with another
> config.d file
> Thanks all.
>
> Glenn
>
> ----- Original Message -----
> From: "Joseph C. Lininger" <jbahm@pcdesk.net>
> To: "Glenn at home" <GlennErvin@cableone.net>; "Speakup is a screen review
> system for Linux." <speakup@braille.uwo.ca>
> Sent: Thursday, February 17, 2005 11:56 PM
> Subject: Re: stopping vsftpd
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Well, calling the boot script for vsftpd with the stop argument should
> do the trick. Alternatively, you can send a TERM signal using killall if
> you really need to stop the process.
>
> Marriage (N): An arrangement which usually results in twice the amount
> of arguing and half the amount of sex.
> Joseph C. Lininger
> jbahm@pcdesk.net
> Verification: 5eab38a77ac40416e075be8f50607ff7
>
>
> And so it came to pass that on Thu, 17 Feb 2005, Glenn at home said
>
>> Hello group,
>> I could use some suggestions on stopping VSFTPD.
>> I have tried sbin/service vsftpd stop
>> and that does not work.
>> I am using Debian.
>> There seems to be no service command in Debian.
>> Any ideas?
>> thanks.
>>
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.6 (GNU/Linux)
>
> iD8DBQFCFYOCJ6dqn0mqPbARAph5AJ9RZLrC6TDL6sZ+6BW88jPxdkYUJwCg2gn8
> KjNEtc8Hc7fxavAPemx9tgk=
> =Tr4T
> -----END PGP SIGNATURE-----
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFCFsV6J6dqn0mqPbARAmvUAKDsjlAnc0gMDnHsTNXAqYelOeEp5ACeOsWz
Rb2Vdcj6QJREvwdgaOzbtfs=
=q6JF
-----END PGP SIGNATURE----- 

Re: stopping vsftpd

[Glenn at home]

Darn!
I checked behind my computer that is under my desk, with Linux on it, and 
the Ethernet cable came out!
The tab that locks it in broke off.
Now lets see what happens!
Glenn

----- Original Message ----- 
From: "Glenn at home" <GlennErvin@cableone.net>
To: "Joseph C. Lininger" <jbahm@pcdesk.net>
Cc: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Saturday, February 19, 2005 8:05 AM
Subject: Re: stopping vsftpd


I do have the init.d, just no .c.
And the vsftpd command does not work in the init.d directory, even though
vsftpd is there.
But I did killall, and now it stops on boot-up, with some kind of message
I'll have to remember it and look it up.
I think it was 3 letters and a colon.
But I press enter, and then I get to the login prompt.
So I uninstalled vsftpd, and I still have the same problem during boot-up.
Now when I try and re-install, or install anything, I hear it trying to
download from kernel.org and it will not go past 0%.
Glenn
----- Original Message ----- 
From: "Joseph C. Lininger" <jbahm@pcdesk.net>
To: "Glenn at home" <GlennErvin@cableone.net>
Sent: Friday, February 18, 2005 10:49 PM
Subject: Re: stopping vsftpd


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You shouldn't have a directory called /etc/init.c, but you should have
one called /etc/init.d. This is where the boot scripts are stored. If
you can't find them there, have a look in /etc/rc.d.

Marriage (N): An arrangement which usually results in twice the amount
of arguing and half the amount of sex.
Joseph C. Lininger
jbahm@pcdesk.net
Verification: 5eab38a77ac40416e075be8f50607ff7


And so it came to pass that on Fri, 18 Feb 2005, Glenn at home said

> killall vsftpd
> seems to have done it, the other previous commands did not seem to work
> for
> some reason.
> What did not work:
> /etc/init.d/vsftpd stop
> or
> etc/init.c/vsftpd stop
> There seems to be no init.c directory in my system.
> Anyway, now that it is apparently stopped, I can run vsftpd with another
> config.d file
> Thanks all.
>
> Glenn
>
> ----- Original Message -----
> From: "Joseph C. Lininger" <jbahm@pcdesk.net>
> To: "Glenn at home" <GlennErvin@cableone.net>; "Speakup is a screen review
> system for Linux." <speakup@braille.uwo.ca>
> Sent: Thursday, February 17, 2005 11:56 PM
> Subject: Re: stopping vsftpd
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Well, calling the boot script for vsftpd with the stop argument should
> do the trick. Alternatively, you can send a TERM signal using killall if
> you really need to stop the process.
>
> Marriage (N): An arrangement which usually results in twice the amount
> of arguing and half the amount of sex.
> Joseph C. Lininger
> jbahm@pcdesk.net
> Verification: 5eab38a77ac40416e075be8f50607ff7
>
>
> And so it came to pass that on Thu, 17 Feb 2005, Glenn at home said
>
>> Hello group,
>> I could use some suggestions on stopping VSFTPD.
>> I have tried sbin/service vsftpd stop
>> and that does not work.
>> I am using Debian.
>> There seems to be no service command in Debian.
>> Any ideas?
>> thanks.
>>
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.6 (GNU/Linux)
>
> iD8DBQFCFYOCJ6dqn0mqPbARAph5AJ9RZLrC6TDL6sZ+6BW88jPxdkYUJwCg2gn8
> KjNEtc8Hc7fxavAPemx9tgk=
> =Tr4T
> -----END PGP SIGNATURE-----
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFCFsV6J6dqn0mqPbARAmvUAKDsjlAnc0gMDnHsTNXAqYelOeEp5ACeOsWz
Rb2Vdcj6QJREvwdgaOzbtfs=
=q6JF
-----END PGP SIGNATURE----- 


_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup 

Re: stopping vsftpd

[Glenn at home]

okay, it's working.
Glenn

----- Original Message ----- 
From: "Glenn at home" <GlennErvin@cableone.net>
To: "Glenn at home" <GlennErvin@cableone.net>; "Speakup is a screen review 
system for Linux." <speakup@braille.uwo.ca>
Sent: Saturday, February 19, 2005 8:24 AM
Subject: Re: stopping vsftpd


Darn!
I checked behind my computer that is under my desk, with Linux on it, and
the Ethernet cable came out!
The tab that locks it in broke off.
Now lets see what happens!
Glenn

----- Original Message ----- 
From: "Glenn at home" <GlennErvin@cableone.net>
To: "Joseph C. Lininger" <jbahm@pcdesk.net>
Cc: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Saturday, February 19, 2005 8:05 AM
Subject: Re: stopping vsftpd


I do have the init.d, just no .c.
And the vsftpd command does not work in the init.d directory, even though
vsftpd is there.
But I did killall, and now it stops on boot-up, with some kind of message
I'll have to remember it and look it up.
I think it was 3 letters and a colon.
But I press enter, and then I get to the login prompt.
So I uninstalled vsftpd, and I still have the same problem during boot-up.
Now when I try and re-install, or install anything, I hear it trying to
download from kernel.org and it will not go past 0%.
Glenn
----- Original Message ----- 
From: "Joseph C. Lininger" <jbahm@pcdesk.net>
To: "Glenn at home" <GlennErvin@cableone.net>
Sent: Friday, February 18, 2005 10:49 PM
Subject: Re: stopping vsftpd


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You shouldn't have a directory called /etc/init.c, but you should have
one called /etc/init.d. This is where the boot scripts are stored. If
you can't find them there, have a look in /etc/rc.d.

Marriage (N): An arrangement which usually results in twice the amount
of arguing and half the amount of sex.
Joseph C. Lininger
jbahm@pcdesk.net
Verification: 5eab38a77ac40416e075be8f50607ff7


And so it came to pass that on Fri, 18 Feb 2005, Glenn at home said

> killall vsftpd
> seems to have done it, the other previous commands did not seem to work
> for
> some reason.
> What did not work:
> /etc/init.d/vsftpd stop
> or
> etc/init.c/vsftpd stop
> There seems to be no init.c directory in my system.
> Anyway, now that it is apparently stopped, I can run vsftpd with another
> config.d file
> Thanks all.
>
> Glenn
>
> ----- Original Message -----
> From: "Joseph C. Lininger" <jbahm@pcdesk.net>
> To: "Glenn at home" <GlennErvin@cableone.net>; "Speakup is a screen review
> system for Linux." <speakup@braille.uwo.ca>
> Sent: Thursday, February 17, 2005 11:56 PM
> Subject: Re: stopping vsftpd
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Well, calling the boot script for vsftpd with the stop argument should
> do the trick. Alternatively, you can send a TERM signal using killall if
> you really need to stop the process.
>
> Marriage (N): An arrangement which usually results in twice the amount
> of arguing and half the amount of sex.
> Joseph C. Lininger
> jbahm@pcdesk.net
> Verification: 5eab38a77ac40416e075be8f50607ff7
>
>
> And so it came to pass that on Thu, 17 Feb 2005, Glenn at home said
>
>> Hello group,
>> I could use some suggestions on stopping VSFTPD.
>> I have tried sbin/service vsftpd stop
>> and that does not work.
>> I am using Debian.
>> There seems to be no service command in Debian.
>> Any ideas?
>> thanks.
>>
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.6 (GNU/Linux)
>
> iD8DBQFCFYOCJ6dqn0mqPbARAph5AJ9RZLrC6TDL6sZ+6BW88jPxdkYUJwCg2gn8
> KjNEtc8Hc7fxavAPemx9tgk=
> =Tr4T
> -----END PGP SIGNATURE-----
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFCFsV6J6dqn0mqPbARAmvUAKDsjlAnc0gMDnHsTNXAqYelOeEp5ACeOsWz
Rb2Vdcj6QJREvwdgaOzbtfs=
=q6JF
-----END PGP SIGNATURE----- 


_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup


_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup