* RE: Installing Linux with Speakup
@ Montemayor, Kateri
` Raul A. Gallegos
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Montemayor, Kateri @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
No I was told that we didnt need synths. Can I get slackware off of
linux-speakup.org?
-----Original Message-----
From: Alex Snow [mailto:alex_snow@gmx.net]
Sent: Tuesday, January 28, 2003 3:14 PM
To: 'speakup@braille.uwo.ca'
Subject: Re: Installing Linux with Speakup
Hi. Do you have synths for the boxes?
And enstead of readhat I'd use slackware 8.1. I have it running on a p120
with 16mb of ram and it works fine.
--
A message from the system administrator: "I've upped my priority, now up
yours!"
On Tue, 28 Jan 2003, Montemayor, Kateri wrote:
> To All,
> I am not sure who to send this to but I need help! I am part of the
> AITP club at Devry University in Colorado Springs,CO. and we volunteered
to
> help the VISI organization by putting Linux with Speakup software on some
> donated computers. The computers are 486 and probably 16megs of ram.I can
> get more ram if I need. The hard drives are about 2gig. The problem is
that
> I do not know much about Linux and nothing about the speakup software. I
do
> have redhat 8 and 7.2. If anyone can give me detailed information on how
to
> install Linux with Speakup on these machines. Or if it can even be done it
> would be greatly appreciated.
> Thank you,
> Kateri Montemayor
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Installing Linux with Speakup Montemayor, Kateri
@ ` Raul A. Gallegos
` Scott Howell
` Janina Sajka
2 siblings, 0 replies; 13+ messages in thread
From: Raul A. Gallegos @ UTC (permalink / raw)
To: speakup
You definitely need a hardware synthesizer if you wish to use speakup. Who
ever told you must have thought you could use speakup with software synths.
You can get slackware from www.slackware.com and it comes with speakup
patched in several of its kernels. Again though, you need a hardware
synthesizer.
----- Original Message -----
From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
To: <speakup@braille.uwo.ca>
Sent: Tuesday, January 28, 2003 4:13 PM
Subject: RE: Installing Linux with Speakup
> No I was told that we didnt need synths. Can I get slackware off of
> linux-speakup.org?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Installing Linux with Speakup Montemayor, Kateri
` Raul A. Gallegos
@ ` Scott Howell
` Janina Sajka
2 siblings, 0 replies; 13+ messages in thread
From: Scott Howell @ UTC (permalink / raw)
To: speakup
AY, you will need synths if you plan to allow someone access using
speech. Of course someone could bring their synth in that is supported
and boot the box with the correct parameters and have speech and I'll
assume this is the intent. Burining the images shouldnt be a problem if
you have access to a box with a burner. Its just a standard iso image
that any Linux/Unix or winblows box with the proper software can burn.
On Tue, Jan 28, 2003 at 03:13:14PM -0700, Montemayor, Kateri wrote:
> No I was told that we didnt need synths. Can I get slackware off of
> linux-speakup.org?
>
> -----Original Message-----
> From: Alex Snow [mailto:alex_snow@gmx.net]
> Sent: Tuesday, January 28, 2003 3:14 PM
> To: 'speakup@braille.uwo.ca'
> Subject: Re: Installing Linux with Speakup
>
>
> Hi. Do you have synths for the boxes?
> And enstead of readhat I'd use slackware 8.1. I have it running on a p120
> with 16mb of ram and it works fine.
>
> --
> A message from the system administrator: "I've upped my priority, now up
> yours!"
> On Tue, 28 Jan 2003, Montemayor, Kateri wrote:
>
> > To All,
> > I am not sure who to send this to but I need help! I am part of the
> > AITP club at Devry University in Colorado Springs,CO. and we volunteered
> to
> > help the VISI organization by putting Linux with Speakup software on some
> > donated computers. The computers are 486 and probably 16megs of ram.I can
> > get more ram if I need. The hard drives are about 2gig. The problem is
> that
> > I do not know much about Linux and nothing about the speakup software. I
> do
> > have redhat 8 and 7.2. If anyone can give me detailed information on how
> to
> > install Linux with Speakup on these machines. Or if it can even be done it
> > would be greatly appreciated.
> > Thank you,
> > Kateri Montemayor
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Installing Linux with Speakup Montemayor, Kateri
` Raul A. Gallegos
` Scott Howell
@ ` Janina Sajka
2 siblings, 0 replies; 13+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: speakup
Montemayor, Kateri writes:
>
> No I was told that we didnt need synths.
Now you know why law courts frown on "hear say" testimony.
>Can I get slackware off of
> linux-speakup.org?
>
> -----Original Message-----
> From: Alex Snow [mailto:alex_snow@gmx.net]
> Sent: Tuesday, January 28, 2003 3:14 PM
> To: 'speakup@braille.uwo.ca'
> Subject: Re: Installing Linux with Speakup
>
>
> Hi. Do you have synths for the boxes?
> And enstead of readhat I'd use slackware 8.1. I have it running on a p120
> with 16mb of ram and it works fine.
>
> --
> A message from the system administrator: "I've upped my priority, now up
> yours!"
> On Tue, 28 Jan 2003, Montemayor, Kateri wrote:
>
> > To All,
> > I am not sure who to send this to but I need help! I am part of the
> > AITP club at Devry University in Colorado Springs,CO. and we volunteered
> to
> > help the VISI organization by putting Linux with Speakup software on some
> > donated computers. The computers are 486 and probably 16megs of ram.I can
> > get more ram if I need. The hard drives are about 2gig. The problem is
> that
> > I do not know much about Linux and nothing about the speakup software. I
> do
> > have redhat 8 and 7.2. If anyone can give me detailed information on how
> to
> > install Linux with Speakup on these machines. Or if it can even be done it
> > would be greatly appreciated.
> > Thank you,
> > Kateri Montemayor
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
--
Janina Sajka, Director
Technology Research and Development
Governmental Relations Group
American Foundation for the Blind (AFB)
Email: janina@afb.net Phone: (202) 408-8175
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Installing Linux with Speakup
@ Montemayor, Kateri
0 siblings, 0 replies; 13+ messages in thread
From: Montemayor, Kateri @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
yes I have roxio though and every time I try to burn it, it locks up my
computer. I found some software to unpack the iso file but when I burn them
to a cd and try and open the cd it is inaccessible.
-----Original Message-----
From: Alex Snow [mailto:alex_snow@gmx.net]
Sent: Wednesday, January 29, 2003 1:40 PM
To: 'speakup@braille.uwo.ca'
Subject: RE: Installing Linux with Speakup
Hi. Do you have a winblows box with a cd burner running something like
adaptech or nero? Just use them to burn a cd using the iso image.
--
A message from the system administrator: "I've upped my priority, now up
yours!"
On Wed, 29 Jan 2003, Montemayor, Kateri wrote:
> Unfortunately this company is non-profit and does not want to spend money
on
> the software. That is why they want to use Linux. And the How to on the
> speakup site does not tell you how to put it on the cd.
>
> -----Original Message-----
> From: Janina Sajka [mailto:janina@rednote.net]
> Sent: Wednesday, January 29, 2003 7:42 AM
> To: speakup@braille.uwo.ca
> Subject: Re: Installing Linux with Speakup
>
>
> Montemayor, Kateri writes:
> >
> > I downloaded the ISO images but cannot get them burned to a cd or
> > unpacked.Do you know how to do this?
>
>
> You don't "unpack" them. That's not what they're for. The HOWTO explains
> in great detail how to create a CD ROM from these files. It also
> explains how to install directly from these files without ever creating
> a CD ROM.
>
> The images on the Speakup site are, however, out of date. Even though
> you've gone to the trouble of downloading them, you'd be better served
> to get a shrink-wrapped copy of Red Hat 8.0 at your favorite computer
> software store or on the net. Just make sure you get Red Hat 8.0.
> Everything you need will be inside the box. Then you can install the
> latest and greatest following the instructions in the HOWTO.
>
>
> >
> > -----Original Message-----
> > From: Janina Sajka [mailto:janina@rednote.net]
> > Sent: Tuesday, January 28, 2003 3:02 PM
> > To: speakup@braille.uwo.ca
> > Subject: Re: Installing Linux with Speakup
> >
> >
> > Use the HOWTO at:
> >
> > http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
> >
> > Please just ignore all the references to Red Hat 7.3. If you ignore
> > those, and the urls that point to 7.3 iso images and docs, the rest is
> > still relevant for Red Hat 8.0
> >
> > You'll need more RAM. I believe 32 is minimum to install Red Hat.
> >
> >
> > Montemayor, Kateri writes:
> > > From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
> > >
> > > To All,
> > > I am not sure who to send this to but I need help! I am part of the
> > > AITP club at Devry University in Colorado Springs,CO. and we
volunteered
> > to
> > > help the VISI organization by putting Linux with Speakup software on
> some
> > > donated computers. The computers are 486 and probably 16megs of ram.I
> can
> > > get more ram if I need. The hard drives are about 2gig. The problem is
> > that
> > > I do not know much about Linux and nothing about the speakup software.
I
> > do
> > > have redhat 8 and 7.2. If anyone can give me detailed information on
how
> > to
> > > install Linux with Speakup on these machines. Or if it can even be
done
> it
> > > would be greatly appreciated.
> > > Thank you,
> > > Kateri Montemayor
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > --
> >
> > Janina Sajka, Director
> > Technology Research and Development
> > Governmental Relations Group
> > American Foundation for the Blind (AFB)
> >
> > Email: janina@afb.net Phone: (202) 408-8175
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
>
> Janina Sajka, Director
> Technology Research and Development
> Governmental Relations Group
> American Foundation for the Blind (AFB)
>
> Email: janina@afb.net Phone: (202) 408-8175
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Montemayor, Kateri
` Alex Snow
@ ` Janina Sajka
1 sibling, 0 replies; 13+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: speakup
Montemayor, Kateri writes:
> From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
>
> Unfortunately this company is non-profit and does not want to spend money on
> the software. That is why they want to use Linux. And the How to on the
> speakup site does not tell you how to put it on the cd.
>
Pardon me if I misunderstood you.
It would be out of scope for the Speakup Modified HOWTO to explaain how
to create CD ROMs. It couldn't possibly do that for all operating
environments and all programs that create CD ROMs.
Consult the documentation for the software you use to create CD ROMs.
It's not hard, but you do need software, and you do need a burner.
So, if this is a burden, go buy a shrink-wrapped st of Red Hat 8.0.
You'll get the same functionality even more up to date. Certainly your
company can afford the $20-$50 cost of Red Hat?
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Installing Linux with Speakup
Montemayor, Kateri
@ ` Alex Snow
` Janina Sajka
1 sibling, 0 replies; 13+ messages in thread
From: Alex Snow @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
Hi. Do you have a winblows box with a cd burner running something like
adaptech or nero? Just use them to burn a cd using the iso image.
--
A message from the system administrator: "I've upped my priority, now up yours!"
On Wed, 29 Jan 2003, Montemayor, Kateri wrote:
> Unfortunately this company is non-profit and does not want to spend money on
> the software. That is why they want to use Linux. And the How to on the
> speakup site does not tell you how to put it on the cd.
>
> -----Original Message-----
> From: Janina Sajka [mailto:janina@rednote.net]
> Sent: Wednesday, January 29, 2003 7:42 AM
> To: speakup@braille.uwo.ca
> Subject: Re: Installing Linux with Speakup
>
>
> Montemayor, Kateri writes:
> >
> > I downloaded the ISO images but cannot get them burned to a cd or
> > unpacked.Do you know how to do this?
>
>
> You don't "unpack" them. That's not what they're for. The HOWTO explains
> in great detail how to create a CD ROM from these files. It also
> explains how to install directly from these files without ever creating
> a CD ROM.
>
> The images on the Speakup site are, however, out of date. Even though
> you've gone to the trouble of downloading them, you'd be better served
> to get a shrink-wrapped copy of Red Hat 8.0 at your favorite computer
> software store or on the net. Just make sure you get Red Hat 8.0.
> Everything you need will be inside the box. Then you can install the
> latest and greatest following the instructions in the HOWTO.
>
>
> >
> > -----Original Message-----
> > From: Janina Sajka [mailto:janina@rednote.net]
> > Sent: Tuesday, January 28, 2003 3:02 PM
> > To: speakup@braille.uwo.ca
> > Subject: Re: Installing Linux with Speakup
> >
> >
> > Use the HOWTO at:
> >
> > http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
> >
> > Please just ignore all the references to Red Hat 7.3. If you ignore
> > those, and the urls that point to 7.3 iso images and docs, the rest is
> > still relevant for Red Hat 8.0
> >
> > You'll need more RAM. I believe 32 is minimum to install Red Hat.
> >
> >
> > Montemayor, Kateri writes:
> > > From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
> > >
> > > To All,
> > > I am not sure who to send this to but I need help! I am part of the
> > > AITP club at Devry University in Colorado Springs,CO. and we volunteered
> > to
> > > help the VISI organization by putting Linux with Speakup software on
> some
> > > donated computers. The computers are 486 and probably 16megs of ram.I
> can
> > > get more ram if I need. The hard drives are about 2gig. The problem is
> > that
> > > I do not know much about Linux and nothing about the speakup software. I
> > do
> > > have redhat 8 and 7.2. If anyone can give me detailed information on how
> > to
> > > install Linux with Speakup on these machines. Or if it can even be done
> it
> > > would be greatly appreciated.
> > > Thank you,
> > > Kateri Montemayor
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > --
> >
> > Janina Sajka, Director
> > Technology Research and Development
> > Governmental Relations Group
> > American Foundation for the Blind (AFB)
> >
> > Email: janina@afb.net Phone: (202) 408-8175
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
>
> Janina Sajka, Director
> Technology Research and Development
> Governmental Relations Group
> American Foundation for the Blind (AFB)
>
> Email: janina@afb.net Phone: (202) 408-8175
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Installing Linux with Speakup
@ Montemayor, Kateri
` Alex Snow
` Janina Sajka
0 siblings, 2 replies; 13+ messages in thread
From: Montemayor, Kateri @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
Unfortunately this company is non-profit and does not want to spend money on
the software. That is why they want to use Linux. And the How to on the
speakup site does not tell you how to put it on the cd.
-----Original Message-----
From: Janina Sajka [mailto:janina@rednote.net]
Sent: Wednesday, January 29, 2003 7:42 AM
To: speakup@braille.uwo.ca
Subject: Re: Installing Linux with Speakup
Montemayor, Kateri writes:
>
> I downloaded the ISO images but cannot get them burned to a cd or
> unpacked.Do you know how to do this?
You don't "unpack" them. That's not what they're for. The HOWTO explains
in great detail how to create a CD ROM from these files. It also
explains how to install directly from these files without ever creating
a CD ROM.
The images on the Speakup site are, however, out of date. Even though
you've gone to the trouble of downloading them, you'd be better served
to get a shrink-wrapped copy of Red Hat 8.0 at your favorite computer
software store or on the net. Just make sure you get Red Hat 8.0.
Everything you need will be inside the box. Then you can install the
latest and greatest following the instructions in the HOWTO.
>
> -----Original Message-----
> From: Janina Sajka [mailto:janina@rednote.net]
> Sent: Tuesday, January 28, 2003 3:02 PM
> To: speakup@braille.uwo.ca
> Subject: Re: Installing Linux with Speakup
>
>
> Use the HOWTO at:
>
> http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
>
> Please just ignore all the references to Red Hat 7.3. If you ignore
> those, and the urls that point to 7.3 iso images and docs, the rest is
> still relevant for Red Hat 8.0
>
> You'll need more RAM. I believe 32 is minimum to install Red Hat.
>
>
> Montemayor, Kateri writes:
> > From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
> >
> > To All,
> > I am not sure who to send this to but I need help! I am part of the
> > AITP club at Devry University in Colorado Springs,CO. and we volunteered
> to
> > help the VISI organization by putting Linux with Speakup software on
some
> > donated computers. The computers are 486 and probably 16megs of ram.I
can
> > get more ram if I need. The hard drives are about 2gig. The problem is
> that
> > I do not know much about Linux and nothing about the speakup software. I
> do
> > have redhat 8 and 7.2. If anyone can give me detailed information on how
> to
> > install Linux with Speakup on these machines. Or if it can even be done
it
> > would be greatly appreciated.
> > Thank you,
> > Kateri Montemayor
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
>
> Janina Sajka, Director
> Technology Research and Development
> Governmental Relations Group
> American Foundation for the Blind (AFB)
>
> Email: janina@afb.net Phone: (202) 408-8175
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
--
Janina Sajka, Director
Technology Research and Development
Governmental Relations Group
American Foundation for the Blind (AFB)
Email: janina@afb.net Phone: (202) 408-8175
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Montemayor, Kateri
@ ` Janina Sajka
0 siblings, 0 replies; 13+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: speakup
Montemayor, Kateri writes:
>
> I downloaded the ISO images but cannot get them burned to a cd or
> unpacked.Do you know how to do this?
You don't "unpack" them. That's not what they're for. The HOWTO explains
in great detail how to create a CD ROM from these files. It also
explains how to install directly from these files without ever creating
a CD ROM.
The images on the Speakup site are, however, out of date. Even though
you've gone to the trouble of downloading them, you'd be better served
to get a shrink-wrapped copy of Red Hat 8.0 at your favorite computer
software store or on the net. Just make sure you get Red Hat 8.0.
Everything you need will be inside the box. Then you can install the
latest and greatest following the instructions in the HOWTO.
>
> -----Original Message-----
> From: Janina Sajka [mailto:janina@rednote.net]
> Sent: Tuesday, January 28, 2003 3:02 PM
> To: speakup@braille.uwo.ca
> Subject: Re: Installing Linux with Speakup
>
>
> Use the HOWTO at:
>
> http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
>
> Please just ignore all the references to Red Hat 7.3. If you ignore
> those, and the urls that point to 7.3 iso images and docs, the rest is
> still relevant for Red Hat 8.0
>
> You'll need more RAM. I believe 32 is minimum to install Red Hat.
>
>
> Montemayor, Kateri writes:
> > From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
> >
> > To All,
> > I am not sure who to send this to but I need help! I am part of the
> > AITP club at Devry University in Colorado Springs,CO. and we volunteered
> to
> > help the VISI organization by putting Linux with Speakup software on some
> > donated computers. The computers are 486 and probably 16megs of ram.I can
> > get more ram if I need. The hard drives are about 2gig. The problem is
> that
> > I do not know much about Linux and nothing about the speakup software. I
> do
> > have redhat 8 and 7.2. If anyone can give me detailed information on how
> to
> > install Linux with Speakup on these machines. Or if it can even be done it
> > would be greatly appreciated.
> > Thank you,
> > Kateri Montemayor
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
>
> Janina Sajka, Director
> Technology Research and Development
> Governmental Relations Group
> American Foundation for the Blind (AFB)
>
> Email: janina@afb.net Phone: (202) 408-8175
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
--
Janina Sajka, Director
Technology Research and Development
Governmental Relations Group
American Foundation for the Blind (AFB)
Email: janina@afb.net Phone: (202) 408-8175
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Montemayor, Kateri
` Janina Sajka
@ ` Alex Snow
1 sibling, 0 replies; 13+ messages in thread
From: Alex Snow @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
Hi. Do you have synths for the boxes?
And enstead of readhat I'd use slackware 8.1. I have it running on a p120
with 16mb of ram and it works fine.
--
A message from the system administrator: "I've upped my priority, now up yours!"
On Tue, 28 Jan 2003, Montemayor, Kateri wrote:
> To All,
> I am not sure who to send this to but I need help! I am part of the
> AITP club at Devry University in Colorado Springs,CO. and we volunteered to
> help the VISI organization by putting Linux with Speakup software on some
> donated computers. The computers are 486 and probably 16megs of ram.I can
> get more ram if I need. The hard drives are about 2gig. The problem is that
> I do not know much about Linux and nothing about the speakup software. I do
> have redhat 8 and 7.2. If anyone can give me detailed information on how to
> install Linux with Speakup on these machines. Or if it can even be done it
> would be greatly appreciated.
> Thank you,
> Kateri Montemayor
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Installing Linux with Speakup
@ Montemayor, Kateri
` Janina Sajka
0 siblings, 1 reply; 13+ messages in thread
From: Montemayor, Kateri @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
I downloaded the ISO images but cannot get them burned to a cd or
unpacked.Do you know how to do this?
-----Original Message-----
From: Janina Sajka [mailto:janina@rednote.net]
Sent: Tuesday, January 28, 2003 3:02 PM
To: speakup@braille.uwo.ca
Subject: Re: Installing Linux with Speakup
Use the HOWTO at:
http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
Please just ignore all the references to Red Hat 7.3. If you ignore
those, and the urls that point to 7.3 iso images and docs, the rest is
still relevant for Red Hat 8.0
You'll need more RAM. I believe 32 is minimum to install Red Hat.
Montemayor, Kateri writes:
> From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
>
> To All,
> I am not sure who to send this to but I need help! I am part of the
> AITP club at Devry University in Colorado Springs,CO. and we volunteered
to
> help the VISI organization by putting Linux with Speakup software on some
> donated computers. The computers are 486 and probably 16megs of ram.I can
> get more ram if I need. The hard drives are about 2gig. The problem is
that
> I do not know much about Linux and nothing about the speakup software. I
do
> have redhat 8 and 7.2. If anyone can give me detailed information on how
to
> install Linux with Speakup on these machines. Or if it can even be done it
> would be greatly appreciated.
> Thank you,
> Kateri Montemayor
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
--
Janina Sajka, Director
Technology Research and Development
Governmental Relations Group
American Foundation for the Blind (AFB)
Email: janina@afb.net Phone: (202) 408-8175
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Installing Linux with Speakup
Montemayor, Kateri
@ ` Janina Sajka
` Alex Snow
1 sibling, 0 replies; 13+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: speakup
Use the HOWTO at:
http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html
Please just ignore all the references to Red Hat 7.3. If you ignore
those, and the urls that point to 7.3 iso images and docs, the rest is
still relevant for Red Hat 8.0
You'll need more RAM. I believe 32 is minimum to install Red Hat.
Montemayor, Kateri writes:
> From: "Montemayor, Kateri" <KMontemayor@cs.devry.edu>
>
> To All,
> I am not sure who to send this to but I need help! I am part of the
> AITP club at Devry University in Colorado Springs,CO. and we volunteered to
> help the VISI organization by putting Linux with Speakup software on some
> donated computers. The computers are 486 and probably 16megs of ram.I can
> get more ram if I need. The hard drives are about 2gig. The problem is that
> I do not know much about Linux and nothing about the speakup software. I do
> have redhat 8 and 7.2. If anyone can give me detailed information on how to
> install Linux with Speakup on these machines. Or if it can even be done it
> would be greatly appreciated.
> Thank you,
> Kateri Montemayor
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
--
Janina Sajka, Director
Technology Research and Development
Governmental Relations Group
American Foundation for the Blind (AFB)
Email: janina@afb.net Phone: (202) 408-8175
^ permalink raw reply [flat|nested] 13+ messages in thread
* Installing Linux with Speakup
@ Montemayor, Kateri
` Janina Sajka
` Alex Snow
0 siblings, 2 replies; 13+ messages in thread
From: Montemayor, Kateri @ UTC (permalink / raw)
To: 'speakup@braille.uwo.ca'
To All,
I am not sure who to send this to but I need help! I am part of the
AITP club at Devry University in Colorado Springs,CO. and we volunteered to
help the VISI organization by putting Linux with Speakup software on some
donated computers. The computers are 486 and probably 16megs of ram.I can
get more ram if I need. The hard drives are about 2gig. The problem is that
I do not know much about Linux and nothing about the speakup software. I do
have redhat 8 and 7.2. If anyone can give me detailed information on how to
install Linux with Speakup on these machines. Or if it can even be done it
would be greatly appreciated.
Thank you,
Kateri Montemayor
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Installing Linux with Speakup Montemayor, Kateri
` Raul A. Gallegos
` Scott Howell
` Janina Sajka
-- strict thread matches above, loose matches on Subject: below --
Montemayor, Kateri
Montemayor, Kateri
` Alex Snow
` Janina Sajka
Montemayor, Kateri
` Janina Sajka
Montemayor, Kateri
` Janina Sajka
` Alex Snow
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).