* file re-naming? @ Igor Gueths ` Gregory Nowak ` Pete 0 siblings, 2 replies; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Hi. I have a winblows box over here from which I am trying to copy my linux kernel tar archive, and speakup. I plan to untar everything on the linux box, and then try to compile speakup, my linksys net driver, among other things into my 2.4.17 kernel. However, Roxio easy cd creator on the box over here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is doing this because it conforms to the Umsdos standard of file naming? Someone please correct me if I am wrong. Does anyone know a way in which I can get around this by possibly using other burning software? Because I know that iso9660 let's you have multiple extensions, as is often the case with linux i.e., readme.debian.gz.sign. I have considered translation tables, but in talking to one of my linux friends about it, we found it a little short of impractical. If anyone wants to mail me privately on their suggestions, please send the message to igueths@yahoo.com. Or, you can respond on-list. Either way is fine with me. Thanks in advance for your help! Igor _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? file re-naming? Igor Gueths @ ` Gregory Nowak ` Richard Villa ` Pete 1 sibling, 1 reply; 21+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: speakup If you want the newest 2.4 series kernel, 2.4.18 is it as of Feb. 25. Greg On Tue, Feb 26, 2002 at 09:00:19PM -0500, Igor Gueths wrote: > Hi. I have a winblows box over here from which I am trying to copy my linux kernel tar archive, and speakup. I plan to untar everything on the linux box, and then try to compile speakup, my linksys net driver, among other things into my 2.4.17 kernel. However, Roxio easy cd creator on the box over here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is doing this because it conforms to the Umsdos standard of file naming? Someone please correct me if I am wrong. Does anyone know a way in which I can get around this by possibly using other burning software? Because I know that iso9660 let's you have multiple extensions, as is often the case with linux i.e., readme.debian.gz.sign. I have considered translation tables, but in talking to one of my linux friends about it, we found it a little short of impractical. If anyone wants to mail me privately on their suggestions, please send the message to igueths@yahoo.com. Or, you can respond on-list. Either way is fine with me. Thanks in advance for your help! > > Igor > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Gregory Nowak @ ` Richard Villa ` Igor Gueths 0 siblings, 1 reply; 21+ messages in thread From: Richard Villa @ UTC (permalink / raw) To: speakup Don't worry about the renaming, let it happen and rename the files yourself when you copy them to your Linux box. It is better to give than to receive. don't believe me, just ask a boxer. Richard ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Richard Villa @ ` Igor Gueths ` Buddy Brannan ` (2 more replies) 0 siblings, 3 replies; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Hi Richard. I like that signature. If memory serves me right, the re-name command is rn right? This was the command way back when I used to log in on a shell account on an Irix box. Or could I create a symbolic link to the re-named file? ----- Original Message ----- From: Richard Villa <rvilla1@swbell.net> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 8:21 AM Subject: Re: file re-naming? > Don't worry about the renaming, let it happen and rename the files yourself > when you copy them to your Linux box. > > It is better to give than to receive. don't believe me, just ask a boxer. > > Richard > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths @ ` Buddy Brannan ` Igor Gueths ` Richard Villa ` Gregory Nowak ` Richard Villa 2 siblings, 2 replies; 21+ messages in thread From: Buddy Brannan @ UTC (permalink / raw) To: speakup Nope. ... rn is an old news reader. Don't use rm, cause that'll delete the file. The command for rename is mv. -- Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. Email: davros@ycardz.com | I choose you because you're funny and kind | I want easy people from now on. | --the Nields ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Buddy Brannan @ ` Igor Gueths ` Alex Snow ` Richard Villa 1 sibling, 1 reply; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup [-- Attachment #1: Type: text/plain, Size: 1696 bytes --] Hi Buddy. Thanks for the info. Well it seems that Linux commands are kind of different from Irix? Bc on irix, rn old filename new filename was the standard usage. Anyway, got a question. If anyone's already fed up with me then I'm sorry lol! Anyway, I have a page here that has installation and compiling instructions for the Linksys Network card driver (tulip.c). The only problem is, I don't know to what version of gcc this doc refers to. When I tried compiling the tulip module, I got all sorts of compilation errors. I am attaching the page in text form for reference. If anyone can try to compile the source file and/or tell me to what version the doc refers to, I would greatly apreciate it! I posted the driver a while back, but in case someone maybe lost it, I'll attach here with the page. Thanks in advance for any help! Also, if there is a problem with the encoding format please let me kno so I can change to uuencoding or something similar. Thanks again! ----- Original Message ----- From: Buddy Brannan <davros@ycardz.com> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 4:37 PM Subject: Re: file re-naming? > Nope. ... rn is an old news reader. > > Don't use rm, cause that'll delete the file. > > The command for rename is mv. > -- > Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. > Email: davros@ycardz.com | I choose you because you're funny and kind > | I want easy people from now on. > | --the Nields > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup [-- Attachment #2: netcard.txt --] [-- Type: text/plain, Size: 8925 bytes --] Linksys: Support Pages Support Page For LNE100TX LINUX You can find additional help in our Knowledge Base by clicking here. EtherFast 10/100 LAN Card Linux Support Installing Under RedHat 5.2 or 6.0 Installing Under Other Linux Distributions If Your Distribution Supports Modules Recompile Kernel method Recompile Module method If Your Distribution Doesn't Support Modules Troubleshooting the Tulip Driver NOTE: If you have the new LNE100TX Version 2 with Wake On Lan Support, You will need to use the driver provided on disk 2 in the linux directory. Installing Under RedHat 5.2 or 6.0 If you are using RedHat 5.2 or above, you don't need to follow the directions below. Instead, follow the general OS and networking installation directions that RedHat provides. When asked to supply the name of the proper network driver during the RedHat installation, choose the Tulip driver from the list of drivers that appears on your screen. Continue with the installation as directed by RedHat, then configure your networking. **Note** If you have problems using the redhat driver, use the instructions below to obtain and install a newer version of the driver. also check the driver disk that came with the card, it may have a linux driver on it. Installing Under Other Linux Distributions The Linksys network card has been tested with Caldera, Debian, Slackware, and SUSE distrubution versions of Linux. If your distribution of Linux supports modules, you will find that the driver setup is relatively quick. If your version of Linux does not support modules, you will need to re-compile the Linux kernel with the proper driver for the Linksys network card. Instructions for both of these methods are described below. In order to complete the Linux setup, you'll need to be familiar with basic Linux procedures and commands (mounting, compiling, etc.). If you are unfamiliar with Linux, try visiting some of these sites for helpful documentation: www.ora.com www.kernel.org www.linux.org www.linuxmall.com www.amazon.com www.ssc.com www.linuxhq.com You can also find documentation at any of the major distribution sites for Linux: www.redhat.com www.caldera.com www.debian.org www.slackware.com www.suse.com To determine if your Linux distribution supports modules, start up your machine, login as admin, and type the following: cat /proc/modules Your distribution supports modules if you don't receive any errors. If you see one or more errors, then your distribution does not support modules, and you will need to recompile the Linux kernel with the appropriate Linksys network card driver. If Your Distribution Supports Modules Make sure that you have the kernel source tree installed. Consult your Linux documentation for further help if you need it. Linksys network cards use a driver called Tulip, which is stored in a file called tulip.c. Although you will find this file on the disk that came with your Linksys card, it is a good idea to download the latest copy of the Tulip driver, since improvements are constantly being made. If you choose to download a new copy of the driver, you will need to compile it. To download the latest version of the Tulip.c driver, go here. To download the latest test version of the driver, go here. If You Are Using a Windows Machine for Downloading If you download the latest version of the Tulip driver onto a Windows computer, you will probably find that the driver will NOT compile properly after you copy it to your Linux box, since Windows and Linux use different linefeeding. To solve this problem, either (1) download the driver using your Linux box, or (2) if you must download it to a Windows machine, covert the driver to Linux format with the DOS2UNIX program, which is freely available on most open source sites on the Internet. Next: You can compile and install the Tulip.c driver in one of two ways. If you are familiar with modules, you can simply compile the driver as a module and copy it to the proper location in your Linux system. If you aren't familiar with modules, and don't mind waiting awhile for your Linux kernel to recompile, you can recompile the entire kernel with the Tulip.c driver inside. Both methods are described below. Recompile Module Method Log in to your Linux box as root, admin, or super user. Obtain the Tulip.c driver from the Linksys disk, or by downloading the latest version of it as described above. Compile the Tulip.c driver with the following command (type the entire command on one line): gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c tulip.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS` If your system is using dual processors, compile the Tulip.c driver using this command instead (type the entire command on one line): gcc -D__SMP__ -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c tulip.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS` Next: mv /lib/modules/kernel_version/net/tulip.o /tmp cp tulip.o /lib/modules/kernel_version/net Next, issue the following commands as root: depmod -a modprobe tulip.o Check the /var/log/messages log file for errors. If there are no errors, then the module is installed correctly. Issue the following command: rmmod tulip.o Follow the instructions that came with your distribution to configure the LAN card. If you are asked what module to use, chose Tulip. Recompile Kernel Method Log in to your Linux box as root, admin, or super user. Obtain the Tulip.c driver from the Linksys disk, or by downloading the latest version of it as described above. Move the old version of the Tulip.c driver to safe location and copy the new version of the Tulip driver over the old one: (the mv command below should be typed on one line, not two): mv /usr/src/linux/drivers/net/tulip.c /usr/src/linux/drivers/net/tulip.old cp tulip.c /usr/src/linux/drivers/net Consult the documentation that came with your Linux distribution to recompile the kernel. Be sure to reboot the system after recompiling. If Your Distribution Doesn't Support Modules If your Linux kernel doesn't support modules, you'll need to recompile the Tulip.c driver into the kernel. To do this: (the mv command below should be typed on one line, not two): mv /usr/src/linux/drivers/net/tulip.c /usr/src/linux/drivers/net/tulip.old cp tulip.c /usr/src/linux/drivers/net Consult the documentation that came with your Linux distribution to recompile the kernel. Be sure to reboot the system after recompiling. After rebooting, follow the instructions that came with your distribution to configure the LAN card. Tulip Driver Troubleshooting If you encounter errors while the Tulip driver is loading, see if the errors look similar to this: Kernel: Found Lite-On 82c168 PNIC at PCI I/O address 0x0. Initialization of tulip failed Try doing a cat /proc/pci and see if a message similar to this appears: Bus 0, device 9, function 0: Ethernet controller: Lite-on LNE100TX (rev 32). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. I/O at 0x0. If you see these messages, your PC's BIOS is probably configured incorrectly. Refer to your PC's motherboard documentation for help. ©Copyright 2002 Linksys Group Inc. All Rights Reserved. Downloads User Guides FAQs Knowledge Base Product Close-Ups Tech Helper Technical Support Warranty Policy White Papers Windows XP Support Event Calendar Photo Library Press Releases Review & Awards Success Stories About Linksys Contact Linksys Job Opportunities Partners Privacy Policy Direct Response Distribution E-Commerce Retail International [-- Attachment #3: Netdrv.tgz --] [-- Type: application/x-compressed, Size: 40648 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths @ ` Alex Snow ` Igor Gueths 0 siblings, 1 reply; 21+ messages in thread From: Alex Snow @ UTC (permalink / raw) To: speakup Hi, Igor! The file is refering to the latest version of gcc. It's on ftp.gnu.org in some dir or another. I am going to compile it when I get my speach working. Alex Snow Webmaster http://compaccess.us.eu.org ----- Original Message ----- From: "Igor Gueths" <igueths@yahoo.com> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 6:37 PM Subject: Re: file re-naming? Hi Buddy. Thanks for the info. Well it seems that Linux commands are kind of different from Irix? Bc on irix, rn old filename new filename was the standard usage. Anyway, got a question. If anyone's already fed up with me then I'm sorry lol! Anyway, I have a page here that has installation and compiling instructions for the Linksys Network card driver (tulip.c). The only problem is, I don't know to what version of gcc this doc refers to. When I tried compiling the tulip module, I got all sorts of compilation errors. I am attaching the page in text form for reference. If anyone can try to compile the source file and/or tell me to what version the doc refers to, I would greatly apreciate it! I posted the driver a while back, but in case someone maybe lost it, I'll attach here with the page. Thanks in advance for any help! Also, if there is a problem with the encoding format please let me kno so I can change to uuencoding or something similar. Thanks again! ----- Original Message ----- From: Buddy Brannan <davros@ycardz.com> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 4:37 PM Subject: Re: file re-naming? > Nope. ... rn is an old news reader. > > Don't use rm, cause that'll delete the file. > > The command for rename is mv. > -- > Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. > Email: davros@ycardz.com | I choose you because you're funny and kind > | I want easy people from now on. > | --the Nields > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Alex Snow @ ` Igor Gueths ` Gregory Nowak ` Alex Snow 0 siblings, 2 replies; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Thanks Alex. But right now, I don't have network access, so I can't really easily dl the latest gcc right now. I kind of thought that this was the case in terms of version reference, but I wasn't sure. I currently have gcc 2.95. So no wonder it didn't work! Anyway, I just thought of another problem. I know that if you want to make winBlows-created text files readable under linux, you have to use dos2unix to remove the crlf character and just leave the lf. Do you have to do something similar to binaries i.e., tar archives tar.gz? Do you have to use a similar program to convert binaries? Thanks for all the input! ----- Original Message ----- From: Alex Snow <alex_snow@gmx.net> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 7:14 PM Subject: Re: file re-naming? > Hi, Igor! > The file is refering to the latest version of gcc. It's on ftp.gnu.org in > some dir or another. I am going to compile it when I get my speach working. > Alex Snow > Webmaster http://compaccess.us.eu.org > ----- Original Message ----- > From: "Igor Gueths" <igueths@yahoo.com> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 6:37 PM > Subject: Re: file re-naming? > > > Hi Buddy. Thanks for the info. Well it seems that Linux commands are kind of > different from Irix? Bc on irix, rn old filename new filename was the > standard usage. Anyway, got a question. If anyone's already fed up with me > then I'm sorry lol! Anyway, I have a page here that has installation and > compiling instructions for the Linksys Network card driver (tulip.c). The > only problem is, I don't know to what version of gcc this doc refers to. > When I tried compiling the tulip module, I got all sorts of compilation > errors. I am attaching the page in text form for reference. If anyone can > try to compile the source file and/or tell me to what version the doc refers > to, I would greatly apreciate it! I posted the driver a while back, but in > case someone maybe lost it, I'll attach here with the page. Thanks in > advance for any help! Also, if there is a problem with the encoding format > please let me kno so I can change to uuencoding or something similar. Thanks > again! > ----- Original Message ----- > From: Buddy Brannan <davros@ycardz.com> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 4:37 PM > Subject: Re: file re-naming? > > > > Nope. ... rn is an old news reader. > > > > Don't use rm, cause that'll delete the file. > > > > The command for rename is mv. > > -- > > Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. > > Email: davros@ycardz.com | I choose you because you're funny and kind > > | I want easy people from now on. > > | --the Nields > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths @ ` Gregory Nowak ` Alex Snow 1 sibling, 0 replies; 21+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: speakup No, a binary is just a binary, you don't need to do anything to it. Greg On Wed, Feb 27, 2002 at 09:00:02PM -0500, Igor Gueths wrote: > Thanks Alex. But right now, I don't have network access, so I can't really easily dl the latest gcc right now. I kind of thought that this was the case in terms of version reference, but I wasn't sure. I currently have gcc 2.95. So no wonder it didn't work! Anyway, I just thought of another problem. I know that if you want to make winBlows-created text files readable under linux, you have to use dos2unix to remove the crlf character and just leave the lf. Do you have to do something similar to binaries i.e., tar archives tar.gz? Do you have to use a similar program to convert binaries? Thanks for all the input! > ----- Original Message ----- > From: Alex Snow <alex_snow@gmx.net> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 7:14 PM > Subject: Re: file re-naming? > > > > Hi, Igor! > > The file is refering to the latest version of gcc. It's on ftp.gnu.org in > > some dir or another. I am going to compile it when I get my speach working. > > Alex Snow > > Webmaster http://compaccess.us.eu.org > > ----- Original Message ----- > > From: "Igor Gueths" <igueths@yahoo.com> > > To: <speakup@braille.uwo.ca> > > Sent: Wednesday, February 27, 2002 6:37 PM > > Subject: Re: file re-naming? > > > > > > Hi Buddy. Thanks for the info. Well it seems that Linux commands are kind of > > different from Irix? Bc on irix, rn old filename new filename was the > > standard usage. Anyway, got a question. If anyone's already fed up with me > > then I'm sorry lol! Anyway, I have a page here that has installation and > > compiling instructions for the Linksys Network card driver (tulip.c). The > > only problem is, I don't know to what version of gcc this doc refers to. > > When I tried compiling the tulip module, I got all sorts of compilation > > errors. I am attaching the page in text form for reference. If anyone can > > try to compile the source file and/or tell me to what version the doc refers > > to, I would greatly apreciate it! I posted the driver a while back, but in > > case someone maybe lost it, I'll attach here with the page. Thanks in > > advance for any help! Also, if there is a problem with the encoding format > > please let me kno so I can change to uuencoding or something similar. Thanks > > again! > > ----- Original Message ----- > > From: Buddy Brannan <davros@ycardz.com> > > To: <speakup@braille.uwo.ca> > > Sent: Wednesday, February 27, 2002 4:37 PM > > Subject: Re: file re-naming? > > > > > > > Nope. ... rn is an old news reader. > > > > > > Don't use rm, cause that'll delete the file. > > > > > > The command for rename is mv. > > > -- > > > Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. > > > Email: davros@ycardz.com | I choose you because you're funny and kind > > > | I want easy people from now on. > > > | --the Nields > > > > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@braille.uwo.ca > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths ` Gregory Nowak @ ` Alex Snow 1 sibling, 0 replies; 21+ messages in thread From: Alex Snow @ UTC (permalink / raw) To: speakup No I don't think you have to. ----- Original Message ----- From: "Igor Gueths" <igueths@yahoo.com> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 9:00 PM Subject: Re: file re-naming? Thanks Alex. But right now, I don't have network access, so I can't really easily dl the latest gcc right now. I kind of thought that this was the case in terms of version reference, but I wasn't sure. I currently have gcc 2.95. So no wonder it didn't work! Anyway, I just thought of another problem. I know that if you want to make winBlows-created text files readable under linux, you have to use dos2unix to remove the crlf character and just leave the lf. Do you have to do something similar to binaries i.e., tar archives tar.gz? Do you have to use a similar program to convert binaries? Thanks for all the input! ----- Original Message ----- From: Alex Snow <alex_snow@gmx.net> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 7:14 PM Subject: Re: file re-naming? > Hi, Igor! > The file is refering to the latest version of gcc. It's on ftp.gnu.org in > some dir or another. I am going to compile it when I get my speach working. > Alex Snow > Webmaster http://compaccess.us.eu.org > ----- Original Message ----- > From: "Igor Gueths" <igueths@yahoo.com> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 6:37 PM > Subject: Re: file re-naming? > > > Hi Buddy. Thanks for the info. Well it seems that Linux commands are kind of > different from Irix? Bc on irix, rn old filename new filename was the > standard usage. Anyway, got a question. If anyone's already fed up with me > then I'm sorry lol! Anyway, I have a page here that has installation and > compiling instructions for the Linksys Network card driver (tulip.c). The > only problem is, I don't know to what version of gcc this doc refers to. > When I tried compiling the tulip module, I got all sorts of compilation > errors. I am attaching the page in text form for reference. If anyone can > try to compile the source file and/or tell me to what version the doc refers > to, I would greatly apreciate it! I posted the driver a while back, but in > case someone maybe lost it, I'll attach here with the page. Thanks in > advance for any help! Also, if there is a problem with the encoding format > please let me kno so I can change to uuencoding or something similar. Thanks > again! > ----- Original Message ----- > From: Buddy Brannan <davros@ycardz.com> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 4:37 PM > Subject: Re: file re-naming? > > > > Nope. ... rn is an old news reader. > > > > Don't use rm, cause that'll delete the file. > > > > The command for rename is mv. > > -- > > Buddy Brannan, KB5ELV/3 | I choose you to take up all of my time. > > Email: davros@ycardz.com | I choose you because you're funny and kind > > | I want easy people from now on. > > | --the Nields > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _______________________________________________ Speakup mailing list Speakup@braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Buddy Brannan ` Igor Gueths @ ` Richard Villa ` Igor Gueths 1 sibling, 1 reply; 21+ messages in thread From: Richard Villa @ UTC (permalink / raw) To: speakup I stand corrected. It is better to give than to receive. don't believe me, just ask a boxer. Richard ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Richard Villa @ ` Igor Gueths ` Richard Villa 0 siblings, 1 reply; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Hi Richard. What do you mean by that statement? Do you mean that it is rn instead of mv for the re-name command? Thanks! ----- Original Message ----- From: Richard Villa <rvilla1@swbell.net> To: <speakup@braille.uwo.ca> Sent: Wednesday, February 27, 2002 10:02 PM Subject: Re: file re-naming? > I stand corrected. > > It is better to give than to receive. don't believe me, just ask a boxer. > > Richard > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths @ ` Richard Villa ` Igor Gueths 0 siblings, 1 reply; 21+ messages in thread From: Richard Villa @ UTC (permalink / raw) To: speakup I mean that the command is MV. On Thu, 28 Feb 2002, Igor Gueths wrote: > Hi Richard. What do you mean by that statement? Do you mean that it is rn instead of mv for the re-name command? Thanks! > ----- Original Message ----- > From: Richard Villa <rvilla1@swbell.net> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 10:02 PM > Subject: Re: file re-naming? > > > > I stand corrected. > > > > It is better to give than to receive. don't believe me, just ask a boxer. > > > > Richard > > > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- It is better to give then to receive. You don't believe me, just ask a boxer. Richard ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Richard Villa @ ` Igor Gueths 0 siblings, 0 replies; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Thanks for the clarification. ----- Original Message ----- From: Richard Villa <rvilla1@swbell.net> To: <speakup@braille.uwo.ca> Sent: Friday, March 01, 2002 7:53 AM Subject: Re: file re-naming? > I mean that the command is MV. > On Thu, 28 Feb 2002, Igor Gueths wrote: > > > Hi Richard. What do you mean by that statement? Do you mean that it is rn instead of mv for the re-name command? Thanks! > > ----- Original Message ----- > > From: Richard Villa <rvilla1@swbell.net> > > To: <speakup@braille.uwo.ca> > > Sent: Wednesday, February 27, 2002 10:02 PM > > Subject: Re: file re-naming? > > > > > > > I stand corrected. > > > > > > It is better to give than to receive. don't believe me, just ask a boxer. > > > > > > Richard > > > > > > > > > > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@braille.uwo.ca > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > -- > It is better to give then to receive. You don't believe me, just ask a > boxer. > > Richard > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths ` Buddy Brannan @ ` Gregory Nowak ` Richard Villa 2 siblings, 0 replies; 21+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: speakup The rename command is mv. The cyntax is: mv source file destination file. If you use rm, you can kiss your rmed file good-bye, unless you had a backup. If you want to learn more, I would recommend: "man mv" and "man rm" Greg On Wed, Feb 27, 2002 at 04:17:09PM -0500, Igor Gueths wrote: > Hi Richard. I like that signature. If memory serves me right, the re-name command is rn right? This was the command way back when I used to log in on a shell account on an Irix box. Or could I create a symbolic link to the re-named file? > ----- Original Message ----- > From: Richard Villa <rvilla1@swbell.net> > To: <speakup@braille.uwo.ca> > Sent: Wednesday, February 27, 2002 8:21 AM > Subject: Re: file re-naming? > > > > Don't worry about the renaming, let it happen and rename the files yourself > > when you copy them to your Linux box. > > > > It is better to give than to receive. don't believe me, just ask a boxer. > > > > Richard > > > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths ` Buddy Brannan ` Gregory Nowak @ ` Richard Villa 2 siblings, 0 replies; 21+ messages in thread From: Richard Villa @ UTC (permalink / raw) To: speakup I believe that you are right on the rename. It is better to give than to receive. don't believe me, just ask a boxer. Richard ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? file re-naming? Igor Gueths ` Gregory Nowak @ ` Pete ` Ed Barnes 1 sibling, 1 reply; 21+ messages in thread From: Pete @ UTC (permalink / raw) To: speakup Hi You can try going into the cd project propertys and changeing the file system type to the ISO standard instead of the juliet file system type. Pete ----- Original Message ----- From: "Igor Gueths" <igueths@yahoo.com> To: <speakup@braille.uwo.ca> Sent: Tuesday, February 26, 2002 9:00 PM Subject: file re-naming? Hi. I have a winblows box over here from which I am trying to copy my linux kernel tar archive, and speakup. I plan to untar everything on the linux box, and then try to compile speakup, my linksys net driver, among other things into my 2.4.17 kernel. However, Roxio easy cd creator on the box over here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is doing this because it conforms to the Umsdos standard of file naming? Someone please correct me if I am wrong. Does anyone know a way in which I can get around this by possibly using other burning software? Because I know that iso9660 let's you have multiple extensions, as is often the case with linux i.e., readme.debian.gz.sign. I have considered translation tables, but in talking to one of my linux friends about it, we found it a little short of impractical. If anyone wants to mail me privately on their suggestions, please send the message to igueths@yahoo.com. Or, you can respond on-list. Either way is fine with me. Thanks in advance for your help! Igor _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _______________________________________________ Speakup mailing list Speakup@braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Pete @ ` Ed Barnes ` Maurice A. Mines ` Igor Gueths 0 siblings, 2 replies; 21+ messages in thread From: Ed Barnes @ UTC (permalink / raw) To: speakup Hi there, I think Nero Burning ROM conforms to the ISO 9660 standard however I may stand corrected. I hope this is helpful. Good luck! Ed Barnes At 10:39 AM 28/02/2002, you wrote: > Hi You can try going into the cd project propertys and changeing the file >system type to the ISO standard instead of the juliet file system type. > Pete > >----- Original Message ----- >From: "Igor Gueths" <igueths@yahoo.com> >To: <speakup@braille.uwo.ca> >Sent: Tuesday, February 26, 2002 9:00 PM >Subject: file re-naming? > > >Hi. I have a winblows box over here from which I am trying to copy my linux >kernel tar archive, and speakup. I plan to untar everything on the linux >box, and then try to compile speakup, my linksys net driver, among other >things into my 2.4.17 kernel. However, Roxio easy cd creator on the box over >here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also >re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is doing >this because it conforms to the Umsdos standard of file naming? Someone >please correct me if I am wrong. Does anyone know a way in which I can get >around this by possibly using other burning software? Because I know that >iso9660 let's you have multiple extensions, as is often the case with linux >i.e., readme.debian.gz.sign. I have considered translation tables, but in >talking to one of my linux friends about it, we found it a little short of >impractical. If anyone wants to mail me privately on their suggestions, >please send the message to igueths@yahoo.com. Or, you can respond on-list. >Either way is fine with me. Thanks in advance for your help! > >Igor > > >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com > > >_______________________________________________ >Speakup mailing list >Speakup@braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > >_______________________________________________ >Speakup mailing list >Speakup@braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Ed Barnes @ ` Maurice A. Mines ` Igor Gueths 1 sibling, 0 replies; 21+ messages in thread From: Maurice A. Mines @ UTC (permalink / raw) To: Ed Barnes; +Cc: speakup yes norer burnning rom das complay with iso9660. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Ed Barnes ` Maurice A. Mines @ ` Igor Gueths ` Ed Barnes 1 sibling, 1 reply; 21+ messages in thread From: Igor Gueths @ UTC (permalink / raw) To: speakup Hi Ed. Does nearo actually rename linux-style filenames? Thanks for the info! ----- Original Message ----- From: Ed Barnes <ed.barnes@janus.northatlantic.nf.ca> To: <speakup@braille.uwo.ca> Sent: Thursday, February 28, 2002 7:14 AM Subject: Re: file re-naming? > Hi there, I think Nero Burning ROM conforms to the ISO 9660 > standard however I may stand corrected. > I hope this is helpful. > Good luck! > Ed Barnes > > At 10:39 AM 28/02/2002, you wrote: > > > Hi You can try going into the cd project propertys and changeing the file > >system type to the ISO standard instead of the juliet file system type. > > Pete > > > >----- Original Message ----- > >From: "Igor Gueths" <igueths@yahoo.com> > >To: <speakup@braille.uwo.ca> > >Sent: Tuesday, February 26, 2002 9:00 PM > >Subject: file re-naming? > > > > > >Hi. I have a winblows box over here from which I am trying to copy my linux > >kernel tar archive, and speakup. I plan to untar everything on the linux > >box, and then try to compile speakup, my linksys net driver, among other > >things into my 2.4.17 kernel. However, Roxio easy cd creator on the box over > >here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also > >re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is doing > >this because it conforms to the Umsdos standard of file naming? Someone > >please correct me if I am wrong. Does anyone know a way in which I can get > >around this by possibly using other burning software? Because I know that > >iso9660 let's you have multiple extensions, as is often the case with linux > >i.e., readme.debian.gz.sign. I have considered translation tables, but in > >talking to one of my linux friends about it, we found it a little short of > >impractical. If anyone wants to mail me privately on their suggestions, > >please send the message to igueths@yahoo.com. Or, you can respond on-list. > >Either way is fine with me. Thanks in advance for your help! > > > >Igor > > > > > >_________________________________________________________ > >Do You Yahoo!? > >Get your free @yahoo.com address at http://mail.yahoo.com > > > > > >_______________________________________________ > >Speakup mailing list > >Speakup@braille.uwo.ca > >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > > >_______________________________________________ > >Speakup mailing list > >Speakup@braille.uwo.ca > >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: file re-naming? ` Igor Gueths @ ` Ed Barnes 0 siblings, 0 replies; 21+ messages in thread From: Ed Barnes @ UTC (permalink / raw) To: speakup Igor, as far as I know Nero Burning ROM does not rename linux-style file names however I am not 100% certain of this, try it out to be certain given that cds are only around $0.5 each if you buy them in large quantities as I do. Good luck and let me know the verdict. Ed Barnes At 04:20 PM 28/02/2002, you wrote: >Hi Ed. Does nearo actually rename linux-style filenames? Thanks for the info! >----- Original Message ----- >From: Ed Barnes <ed.barnes@janus.northatlantic.nf.ca> >To: <speakup@braille.uwo.ca> >Sent: Thursday, February 28, 2002 7:14 AM >Subject: Re: file re-naming? > > > > Hi there, I think Nero Burning ROM conforms to the ISO 9660 > > standard however I may stand corrected. > > I hope this is helpful. > > Good luck! > > Ed Barnes > > > > At 10:39 AM 28/02/2002, you wrote: > > > > > Hi You can try going into the cd project propertys and changeing > the file > > >system type to the ISO standard instead of the juliet file system type. > > > Pete > > > > > >----- Original Message ----- > > >From: "Igor Gueths" <igueths@yahoo.com> > > >To: <speakup@braille.uwo.ca> > > >Sent: Tuesday, February 26, 2002 9:00 PM > > >Subject: file re-naming? > > > > > > > > >Hi. I have a winblows box over here from which I am trying to copy my > linux > > >kernel tar archive, and speakup. I plan to untar everything on the linux > > >box, and then try to compile speakup, my linksys net driver, among other > > >things into my 2.4.17 kernel. However, Roxio easy cd creator on the > box over > > >here tries to re-name speakup-1.00.tar.gz, to speakup_1.0_tar.gz. It also > > >re-names linux-2.4.17.tar.gz, to a similar name. I believe that it is > doing > > >this because it conforms to the Umsdos standard of file naming? Someone > > >please correct me if I am wrong. Does anyone know a way in which I can get > > >around this by possibly using other burning software? Because I know that > > >iso9660 let's you have multiple extensions, as is often the case with > linux > > >i.e., readme.debian.gz.sign. I have considered translation tables, but in > > >talking to one of my linux friends about it, we found it a little short of > > >impractical. If anyone wants to mail me privately on their suggestions, > > >please send the message to igueths@yahoo.com. Or, you can respond on-list. > > >Either way is fine with me. Thanks in advance for your help! > > > > > >Igor > > > > > > > > >_________________________________________________________ > > >Do You Yahoo!? > > >Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > > > >_______________________________________________ > > >Speakup mailing list > > >Speakup@braille.uwo.ca > > >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > > > > > > >_______________________________________________ > > >Speakup mailing list > > >Speakup@braille.uwo.ca > > >http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com > > >_______________________________________________ >Speakup mailing list >Speakup@braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
file re-naming? Igor Gueths
` Gregory Nowak
` Richard Villa
` Igor Gueths
` Buddy Brannan
` Igor Gueths
` Alex Snow
` Igor Gueths
` Gregory Nowak
` Alex Snow
` Richard Villa
` Igor Gueths
` Richard Villa
` Igor Gueths
` Gregory Nowak
` Richard Villa
` Pete
` Ed Barnes
` Maurice A. Mines
` Igor Gueths
` Ed Barnes
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).