ssh2 clients for windows

ssh2 clients for windows

[William Hubbs]

Hi all,

I am using windows and linux here at the house, and I am intrested in finding
an accessible ssh client for windows that supports ssh2.

I took a look at the client from http://www.ssh.com, and the terminal  doesn't appear to be accessible to jfw without scripts.  Does anyone know of scripts that work with this client?  Or are there scripts for another client some where?

Thanks,

William

Re: ssh2 clients for windows

[erik burggraaf]

Hi, Winscp is free, but it's a god aweful pain in the neck.

WSftp is better, for about 20 or 30 USD.  Absolute ftp can be configured for
ssh2 using secure crt, but I haven't had time to figure it out yet.  None of
these solutions need screen reader configuration under either of the US 2.

I think some here are using ftp voyager.  That'd be excelent, but I don't
see how to go about it.  Voyager has secure ssl, but I can't find either
https or ssh capabilities.

Hope this helps,

Erik
----- Original Message -----
From: William Hubbs <kc5eiv@kc5eiv.homeip.net>
To: Speakup Mailing List <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 3:31 PM
Subject: ssh2 clients for windows


> Hi all,
>
> I am using windows and linux here at the house, and I am intrested in
finding
> an accessible ssh client for windows that supports ssh2.
>
> I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone know of
scripts that work with this client?  Or are there scripts for another client
some where?
>
> Thanks,
>
> William
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>

Re: ssh2 clients for windows

[Charles Crawford]

Does WSFTP run in the dos window?  
On Mon, 1 Sep 2003, erik burggraaf 
wrote:

> Hi, Winscp is free, but it's a god aweful pain in the neck.
> 
> WSftp is better, for about 20 or 30 USD.  Absolute ftp can be configured for
> ssh2 using secure crt, but I haven't had time to figure it out yet.  None of
> these solutions need screen reader configuration under either of the US 2.
> 
> I think some here are using ftp voyager.  That'd be excelent, but I don't
> see how to go about it.  Voyager has secure ssl, but I can't find either
> https or ssh capabilities.
> 
> Hope this helps,
> 
> Erik
> ----- Original Message -----
> From: William Hubbs <kc5eiv@kc5eiv.homeip.net>
> To: Speakup Mailing List <speakup@braille.uwo.ca>
> Sent: Monday, September 01, 2003 3:31 PM
> Subject: ssh2 clients for windows
> 
> 
> > Hi all,
> >
> > I am using windows and linux here at the house, and I am intrested in
> finding
> > an accessible ssh client for windows that supports ssh2.
> >
> > I took a look at the client from http://www.ssh.com, and the terminal
> doesn't appear to be accessible to jfw without scripts.  Does anyone know of
> scripts that work with this client?  Or are there scripts for another client
> some where?
> >
> > Thanks,
> >
> > William
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> >
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 

-- 
-- Charlie Crawford

Re: ssh2 clients for windows

[erik burggraaf]

Nop, it's gui.  I'm not a programmer, but I'd say it's likely got a really
nice 32 bit back end, all visual C or visual basic code.  No irritating
custome controls and such to muck up the interface either.  A bit of tabbing
as I remember, but as opposed to the crashes of winscp, it's as nothing.

I'd even be willing to pay for it, as secure CRT runs about $100 and wsftp's
only $20-$30 if I remember right, but the speakup site is the only place I
use it right now.  I'm running on a shoestring here, and it's tough to
justify the expense.
----- Original Message -----
From: Charles Crawford <ccrawford@acb.org>
To: <speakup@braille.uwo.ca>
Sent: Tuesday, September 02, 2003 6:17 AM
Subject: Re: ssh2 clients for windows


> Does WSFTP run in the dos window?
> On Mon, 1 Sep 2003, erik burggraaf
> wrote:
>
> > Hi, Winscp is free, but it's a god aweful pain in the neck.
> >
> > WSftp is better, for about 20 or 30 USD.  Absolute ftp can be configured
for
> > ssh2 using secure crt, but I haven't had time to figure it out yet.
None of
> > these solutions need screen reader configuration under either of the US
2.
> >
> > I think some here are using ftp voyager.  That'd be excelent, but I
don't
> > see how to go about it.  Voyager has secure ssl, but I can't find either
> > https or ssh capabilities.
> >
> > Hope this helps,
> >
> > Erik
> > ----- Original Message -----
> > From: William Hubbs <kc5eiv@kc5eiv.homeip.net>
> > To: Speakup Mailing List <speakup@braille.uwo.ca>
> > Sent: Monday, September 01, 2003 3:31 PM
> > Subject: ssh2 clients for windows
> >
> >
> > > Hi all,
> > >
> > > I am using windows and linux here at the house, and I am intrested in
> > finding
> > > an accessible ssh client for windows that supports ssh2.
> > >
> > > I took a look at the client from http://www.ssh.com, and the terminal
> > doesn't appear to be accessible to jfw without scripts.  Does anyone
know of
> > scripts that work with this client?  Or are there scripts for another
client
> > some where?
> > >
> > > Thanks,
> > >
> > > William
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> > >
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
> --
> -- Charlie Crawford
>
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>

Re: ssh2 clients for windows

[Alex Snow]

Securecrt is a pretty accessible client supporting ssh2. Unfortunately it's
not free.  Have you looked at putty yet? I don't remember the url but a
google search should turn it up.
----- Original Message -----
From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
To: "Speakup Mailing List" <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 2:31 PM
Subject: ssh2 clients for windows


> Hi all,
>
> I am using windows and linux here at the house, and I am intrested in
finding
> an accessible ssh client for windows that supports ssh2.
>
> I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone know of
scripts that work with this client?  Or are there scripts for another client
some where?
>
> Thanks,
>
> William
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

ssh2 clients for windows

[Ann Parsons]

Hi,

Try Putty.

Ann P.

-- 
			Ann K. Parsons  
email:  akp@eznet.net 			ICQ Number:  33006854
WEB SITE:  http://home.eznet.net/~akp
"All that is gold does not glitter.  Not all those who wander are lost."  JRRT

Re: ssh2 clients for windows

[Adam Myrow]

On Mon, 1 Sep 2003, Ann Parsons wrote:

> Hi,
>
> Try Putty.

I personally haven't had much luck with that program.  I could never get
JAWS to locate the cursor in the terminal window, and it kept turning on
my numlock.  I never found anything very good for ssh2 which was free.

RE: ssh2 clients for windows

[Sina Bahram]

I think you need to change the cursor shape. I am not personally
familiar with the program, but if you search the archives of this list.
I remember seeing several different messages about this. And suddenly
the program becomes accessible, or at least I gathered as much.

Hth,
Sina

-----Original Message-----
From: speakup-admin@braille.uwo.ca [mailto:speakup-admin@braille.uwo.ca]
On Behalf Of Adam Myrow
Sent: Monday, September 01, 2003 5:36 PM
To: speakup@braille.uwo.ca
Subject: Re: ssh2 clients for windows


On Mon, 1 Sep 2003, Ann Parsons wrote:

> Hi,
>
> Try Putty.

I personally haven't had much luck with that program.  I could never get
JAWS to locate the cursor in the terminal window, and it kept turning on
my numlock.  I never found anything very good for ssh2 which was free.



_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[JOHN LEE]

You want a blinking underline cursor not block.
----- Original Message ----- 
From: "Sina Bahram" <sbahram@nc.rr.com>
To: <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 8:17 PM
Subject: RE: ssh2 clients for windows


> I think you need to change the cursor shape. I am not personally
> familiar with the program, but if you search the archives of this list.
> I remember seeing several different messages about this. And suddenly
> the program becomes accessible, or at least I gathered as much.
> 
> Hth,
> Sina
> 
> -----Original Message-----
> From: speakup-admin@braille.uwo.ca [mailto:speakup-admin@braille.uwo.ca]
> On Behalf Of Adam Myrow
> Sent: Monday, September 01, 2003 5:36 PM
> To: speakup@braille.uwo.ca
> Subject: Re: ssh2 clients for windows
> 
> 
> On Mon, 1 Sep 2003, Ann Parsons wrote:
> 
> > Hi,
> >
> > Try Putty.
> 
> I personally haven't had much luck with that program.  I could never get
> JAWS to locate the cursor in the terminal window, and it kept turning on
> my numlock.  I never found anything very good for ssh2 which was free.
> 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[Steve Holmes]

I have been using putty with Window-Eyes fairly well but I too had
trouble with cursor tracking.  Wineyes could track the cursor about
60% of the time.  I'm also looking for something else.  I hear Secure
CRT is good but I think rather expensive for personal use - especial
when I'm a fan of free software (Free as in speech).

On Mon, Sep 01, 2003 at 04:35:59PM -0500, Adam Myrow wrote:
> I personally haven't had much luck with that program.  I could never get
> JAWS to locate the cursor in the terminal window, and it kept turning on
> my numlock.  I never found anything very good for ssh2 which was free.
> 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[William Hubbs]

Hi Steve and all,

The price is my issue with secure crt also.  I will pay it if I don't have a choice, but the last time I checked it is $90 (ouch).

William

On Tue, Sep 02, 2003 at 07:32:52AM -0700, Steve Holmes wrote:
> I have been using putty with Window-Eyes fairly well but I too had
> trouble with cursor tracking.  Wineyes could track the cursor about
> 60% of the time.  I'm also looking for something else.  I hear Secure
> CRT is good but I think rather expensive for personal use - especial
> when I'm a fan of free software (Free as in speech).
> 
> On Mon, Sep 01, 2003 at 04:35:59PM -0500, Adam Myrow wrote:
> > I personally haven't had much luck with that program.  I could never get
> > JAWS to locate the cursor in the terminal window, and it kept turning on
> > my numlock.  I never found anything very good for ssh2 which was free.
> > 
> > 
> > 
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 

Re: ssh2 clients for windows

[Raul A. Gallegos]

Hi.  For ssh2 under windows I use secure crt.  It's speech friendly but 
I don't use jfw either.  I only had to do some minimal changes to the 
window-eyes set but mainly cosmettic changes.


William Hubbs said the following on Mon, Sep 01, 2003 at 02:31:54PM -0500:
> Hi all,
> 
> I am using windows and linux here at the house, and I am intrested in finding
> an accessible ssh client for windows that supports ssh2.
> 
> I took a look at the client from http://www.ssh.com, and the terminal  doesn't appear to be accessible to jfw without scripts.  Does anyone know of scripts that work with this client?  Or are there scripts for another client some where?
> 
> Thanks,
> 
> William
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

-- 
Raul a. Gallegos - http://www.asmodean.net
For the best 2 hours of 80's music on ACB Radio Interactive Saturdays 22 UTC,
Visit http://www.chosen80s.com for all the details.

Re: ssh2 clients for windows

[Alex Snow]

There are jfw scripts for securecrt that make it pretty much accessible.  If
you end up chosing that client I can probably dig them up and send them
along.
----- Original Message -----
From: "Raul A. Gallegos" <raul@asmodean.net>
To: <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 6:13 PM
Subject: Re: ssh2 clients for windows


> Hi.  For ssh2 under windows I use secure crt.  It's speech friendly but
> I don't use jfw either.  I only had to do some minimal changes to the
> window-eyes set but mainly cosmettic changes.
>
>
> William Hubbs said the following on Mon, Sep 01, 2003 at 02:31:54PM -0500:
> > Hi all,
> >
> > I am using windows and linux here at the house, and I am intrested in
finding
> > an accessible ssh client for windows that supports ssh2.
> >
> > I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone know of
scripts that work with this client?  Or are there scripts for another client
some where?
> >
> > Thanks,
> >
> > William
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
> Raul a. Gallegos - http://www.asmodean.net
> For the best 2 hours of 80's music on ACB Radio Interactive Saturdays 22
UTC,
> Visit http://www.chosen80s.com for all the details.
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

Re: ssh2 clients for windows

[JOHN LEE]

Please send the scripts to me!

John
----- Original Message -----
From: "Alex Snow" <alex_snow@gmx.net>
To: <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 9:37 PM
Subject: Re: ssh2 clients for windows


> There are jfw scripts for securecrt that make it pretty much accessible.
If
> you end up chosing that client I can probably dig them up and send them
> along.
> ----- Original Message -----
> From: "Raul A. Gallegos" <raul@asmodean.net>
> To: <speakup@braille.uwo.ca>
> Sent: Monday, September 01, 2003 6:13 PM
> Subject: Re: ssh2 clients for windows
>
>
> > Hi.  For ssh2 under windows I use secure crt.  It's speech friendly but
> > I don't use jfw either.  I only had to do some minimal changes to the
> > window-eyes set but mainly cosmettic changes.
> >
> >
> > William Hubbs said the following on Mon, Sep 01, 2003 at
02:31:54PM -0500:
> > > Hi all,
> > >
> > > I am using windows and linux here at the house, and I am intrested in
> finding
> > > an accessible ssh client for windows that supports ssh2.
> > >
> > > I took a look at the client from http://www.ssh.com, and the terminal
> doesn't appear to be accessible to jfw without scripts.  Does anyone know
of
> scripts that work with this client?  Or are there scripts for another
client
> some where?
> > >
> > > Thanks,
> > >
> > > William
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > --
> > Raul a. Gallegos - http://www.asmodean.net
> > For the best 2 hours of 80's music on ACB Radio Interactive Saturdays 22
> UTC,
> > Visit http://www.chosen80s.com for all the details.
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[Joseph C. Lininger]

I recommend open ssh for Windows. It's the same software Linux uses for ssh.
If you like, I can send it to you.
--
Joseph C. Lininger
jbahm@pcdesk.net
----- Original Message ----- 
From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
To: "Speakup Mailing List" <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 1:31 PM
Subject: ssh2 clients for windows


> Hi all,
>
> I am using windows and linux here at the house, and I am intrested in
finding
> an accessible ssh client for windows that supports ssh2.
>
> I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone know of
scripts that work with this client?  Or are there scripts for another client
some where?
>
> Thanks,
>
> William
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

RE: ssh2 clients for windows

[Sina Bahram]

If you wouldn't mind. Could you please send that to me as well.

Thanks much,
Sina

-----Original Message-----
From: speakup-admin@braille.uwo.ca [mailto:speakup-admin@braille.uwo.ca]
On Behalf Of Joseph C. Lininger
Sent: Monday, September 01, 2003 9:11 PM
To: speakup@braille.uwo.ca
Subject: Re: ssh2 clients for windows


I recommend open ssh for Windows. It's the same software Linux uses for
ssh. If you like, I can send it to you.
--
Joseph C. Lininger
jbahm@pcdesk.net
----- Original Message ----- 
From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
To: "Speakup Mailing List" <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 1:31 PM
Subject: ssh2 clients for windows


> Hi all,
>
> I am using windows and linux here at the house, and I am intrested in
finding
> an accessible ssh client for windows that supports ssh2.
>
> I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone
know of scripts that work with this client?  Or are there scripts for
another client some where?
>
> Thanks,
>
> William
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca 
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>


_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[Darrell Shandrow]

Hi Joseph,

Didn't know there was such a thing as an Open SSH distro compiled for
Windows.  Please provide a link to it.

Thanks.

Darrell Shandrow - Shandrow Communications!
Technology consultant/instructor, network/systems administrator!
A+, CCNA, Network+!
Check out high quality telecommunications services at http://ld.net/?nu7i
All the best to coalition forces carrying out Operation Iraqi Freedom!
----- Original Message ----- 
From: "Joseph C. Lininger" <jbahm@pcdesk.net>
To: <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 6:11 PM
Subject: Re: ssh2 clients for windows


> I recommend open ssh for Windows. It's the same software Linux uses for
ssh.
> If you like, I can send it to you.
> --
> Joseph C. Lininger
> jbahm@pcdesk.net
> ----- Original Message ----- 
> From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
> To: "Speakup Mailing List" <speakup@braille.uwo.ca>
> Sent: Monday, September 01, 2003 1:31 PM
> Subject: ssh2 clients for windows
>
>
> > Hi all,
> >
> > I am using windows and linux here at the house, and I am intrested in
> finding
> > an accessible ssh client for windows that supports ssh2.
> >
> > I took a look at the client from http://www.ssh.com, and the terminal
> doesn't appear to be accessible to jfw without scripts.  Does anyone know
of
> scripts that work with this client?  Or are there scripts for another
client
> some where?
> >
> > Thanks,
> >
> > William
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ssh2 clients for windows

[Joseph C. Lininger]

You can find info and downloads pertaining to openssh for Windows at:

http://lexa.mckenna.edu/sshwindows/
--
Joseph C. Lininger
jbahm@pcdesk.net
----- Original Message ----- 
From: "Darrell Shandrow" <nu7i@azboss.net>
To: <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 7:16 PM
Subject: Re: ssh2 clients for windows


> Hi Joseph,
>
> Didn't know there was such a thing as an Open SSH distro compiled for
> Windows.  Please provide a link to it.
>
> Thanks.
>
> Darrell Shandrow - Shandrow Communications!
> Technology consultant/instructor, network/systems administrator!
> A+, CCNA, Network+!
> Check out high quality telecommunications services at http://ld.net/?nu7i
> All the best to coalition forces carrying out Operation Iraqi Freedom!
> ----- Original Message ----- 
> From: "Joseph C. Lininger" <jbahm@pcdesk.net>
> To: <speakup@braille.uwo.ca>
> Sent: Monday, September 01, 2003 6:11 PM
> Subject: Re: ssh2 clients for windows
>
>
> > I recommend open ssh for Windows. It's the same software Linux uses for
> ssh.
> > If you like, I can send it to you.
> > --
> > Joseph C. Lininger
> > jbahm@pcdesk.net
> > ----- Original Message ----- 
> > From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
> > To: "Speakup Mailing List" <speakup@braille.uwo.ca>
> > Sent: Monday, September 01, 2003 1:31 PM
> > Subject: ssh2 clients for windows
> >
> >
> > > Hi all,
> > >
> > > I am using windows and linux here at the house, and I am intrested in
> > finding
> > > an accessible ssh client for windows that supports ssh2.
> > >
> > > I took a look at the client from http://www.ssh.com, and the terminal
> > doesn't appear to be accessible to jfw without scripts.  Does anyone
know
> of
> > scripts that work with this client?  Or are there scripts for another
> client
> > some where?
> > >
> > > Thanks,
> > >
> > > William
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

Re: ssh2 clients for windows

[Léonie Watson]

William,

    I find the Putty client reasonably accessible under JFW. You can grab it
from this page:

http://teddy.fcc.ro/cgi-bin/base/page.pl?page=2&prg

    All you need to do is set Jaws to screen echo all, instead of highlited
and possibly hide the desktop clock, as it gets announced when screen echo
is set to all.

HTH,
Tink
----- Original Message -----
From: "William Hubbs" <kc5eiv@kc5eiv.homeip.net>
To: "Speakup Mailing List" <speakup@braille.uwo.ca>
Sent: Monday, September 01, 2003 8:31 PM
Subject: ssh2 clients for windows


> Hi all,
>
> I am using windows and linux here at the house, and I am intrested in
finding
> an accessible ssh client for windows that supports ssh2.
>
> I took a look at the client from http://www.ssh.com, and the terminal
doesn't appear to be accessible to jfw without scripts.  Does anyone know of
scripts that work with this client?  Or are there scripts for another client
some where?
>
> Thanks,
>
> William
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>