* Knoppix with braille support (fwd)
@ John J. Boyer
` Dietmar Segbert
` Nath
0 siblings, 2 replies; 6+ messages in thread
From: John J. Boyer @ UTC (permalink / raw)
To: blinux-list
Hello,
This message is forwarded `from the blindprogramming list. Could one of
you answer these questions and also give the procedure for subscribing to
the blinux list. It would be great to get the author on the right list!
Thanks,
John
--
John J. Boyer; Executive Director, Chief Software Developer
Computers to Help People, Inc.
http://www.chpi.org
825 East Johnson; Madison, WI 53703
---------- Forwarded message ----------
Date: Mon, 15 Mar 2004 21:21:52 +0100
From: Kay <Dsn1@gmx.de>
Reply-To: Programming@blindprogramming.com
To: Programming@blindprogramming.com
Subject: Knoppix with braille support
Hi,
is it possible to run the knoppix version of linux with a braille display?
And how can I realize that (step by step) if it is possbile?
Thanks for answers and help
Kay
Useful links:
If you forget your password, want to change your list settings, unsubscribe, etc., go to the List Info page at:
http://BlindProgramming.com/mailman/listinfo/programming_blindprogramming.com
Other blind lists: http://www.BlindProgramming.com/ftp/general/blindlists.txt
Web site address: www.BlindProgramming.com
Previous list archive: http://groups.yahoo.com/group/blindprogramming/
More useful links related to this list:
For assistance: programming-owner@BlindProgramming.com
To subscribe: programming-subscribe@BlindProgramming.com
To unsubscribe: programming-unsubscribe@BlindProgramming.com
To send set commands: programming-request@BlindProgramming.com
For a list of set commands: http://www.BlindProgramming.com/set_commands.txt
_______________________________________________
Programming@blindprogramming.com
http://blindprogramming.com/mailman/listinfo/programming_blindprogramming.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Knoppix with braille support (fwd)
Knoppix with braille support (fwd) John J. Boyer
@ ` Dietmar Segbert
` Nath
1 sibling, 0 replies; 6+ messages in thread
From: Dietmar Segbert @ UTC (permalink / raw)
To: blinux-list
Hello,
to start brltty under knoppix type if the prompt apears:
blind brltty=cb,/dev/ttyS1,text.german.tbl
for a tiemann combibralle which is connect to /dev/ttyS1 and use the
german braille table.
Regards
Dietmar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Knoppix with braille support (fwd)
Knoppix with braille support (fwd) John J. Boyer
` Dietmar Segbert
@ ` Nath
` hank smith
1 sibling, 1 reply; 6+ messages in thread
From: Nath @ UTC (permalink / raw)
To: Linux for blind general discussion; +Cc: Dsn1
Yes, it is possible.
at the Knoppix boot prompt you must enter the following line :
knoppix blind brltty=device,port,table
Of course replace device with the code représenting your braille display
(generally two letters), port with the port where the braille display is
connected, and table with the name of the file containing the braille
table you want to use.
for example to use an handitec braille display on serial port com1 with
a french braille table the line must be as follow :
knoppix blind brltty=ht,/dev/ttyS0,text.fr-cbifs.tbl
Hope this help,
"John J. Boyer" <director@chpi.org> writes:
> Hello,
>
> This message is forwarded `from the blindprogramming list. Could one of
> you answer these questions and also give the procedure for subscribing to
> the blinux list. It would be great to get the author on the right list!
>
> Thanks,
> John
>
>
> --
> John J. Boyer; Executive Director, Chief Software Developer
> Computers to Help People, Inc.
> http://www.chpi.org
> 825 East Johnson; Madison, WI 53703
>
>
> ---------- Forwarded message ----------
> Date: Mon, 15 Mar 2004 21:21:52 +0100
> From: Kay <Dsn1@gmx.de>
> Reply-To: Programming@blindprogramming.com
> To: Programming@blindprogramming.com
> Subject: Knoppix with braille support
>
> Hi,
>
> is it possible to run the knoppix version of linux with a braille display?
> And how can I realize that (step by step) if it is possbile?
>
> Thanks for answers and help
>
> Kay
>
>
>
> Useful links:
> If you forget your password, want to change your list settings, unsubscribe, etc., go to the List Info page at:
> http://BlindProgramming.com/mailman/listinfo/programming_blindprogramming.com
>
> Other blind lists: http://www.BlindProgramming.com/ftp/general/blindlists.txt
> Web site address: www.BlindProgramming.com
> Previous list archive: http://groups.yahoo.com/group/blindprogramming/
>
> More useful links related to this list:
> For assistance: programming-owner@BlindProgramming.com
> To subscribe: programming-subscribe@BlindProgramming.com
> To unsubscribe: programming-unsubscribe@BlindProgramming.com
> To send set commands: programming-request@BlindProgramming.com
> For a list of set commands: http://www.BlindProgramming.com/set_commands.txt
>
> _______________________________________________
>
> Programming@blindprogramming.com
> http://blindprogramming.com/mailman/listinfo/programming_blindprogramming.com
>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
>
--
Nath
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Knoppix with braille support (fwd)
` Nath
@ ` hank smith
` Nath
0 siblings, 1 reply; 6+ messages in thread
From: hank smith @ UTC (permalink / raw)
To: Linux for blind general discussion
can you use speech with noppix?
if so what do you type in?
----- Original Message -----
From: "Nath" <nath.ml@free.fr>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Cc: <Dsn1@gmx.de>
Sent: Tuesday, March 16, 2004 12:01 PM
Subject: Re: Knoppix with braille support (fwd)
> Yes, it is possible.
> at the Knoppix boot prompt you must enter the following line :
> knoppix blind brltty=device,port,table
> Of course replace device with the code représenting your braille display
> (generally two letters), port with the port where the braille display is
> connected, and table with the name of the file containing the braille
> table you want to use.
> for example to use an handitec braille display on serial port com1 with
> a french braille table the line must be as follow :
> knoppix blind brltty=ht,/dev/ttyS0,text.fr-cbifs.tbl
>
> Hope this help,
>
>
>
>
> "John J. Boyer" <director@chpi.org> writes:
>
> > Hello,
> >
> > This message is forwarded `from the blindprogramming list. Could one of
> > you answer these questions and also give the procedure for subscribing
to
> > the blinux list. It would be great to get the author on the right list!
> >
> > Thanks,
> > John
> >
> >
> > --
> > John J. Boyer; Executive Director, Chief Software Developer
> > Computers to Help People, Inc.
> > http://www.chpi.org
> > 825 East Johnson; Madison, WI 53703
> >
> >
> > ---------- Forwarded message ----------
> > Date: Mon, 15 Mar 2004 21:21:52 +0100
> > From: Kay <Dsn1@gmx.de>
> > Reply-To: Programming@blindprogramming.com
> > To: Programming@blindprogramming.com
> > Subject: Knoppix with braille support
> >
> > Hi,
> >
> > is it possible to run the knoppix version of linux with a braille
display?
> > And how can I realize that (step by step) if it is possbile?
> >
> > Thanks for answers and help
> >
> > Kay
> >
> >
> >
> > Useful links:
> > If you forget your password, want to change your list settings,
unsubscribe, etc., go to the List Info page at:
> >
http://BlindProgramming.com/mailman/listinfo/programming_blindprogramming.co
m
> >
> > Other blind lists:
http://www.BlindProgramming.com/ftp/general/blindlists.txt
> > Web site address: www.BlindProgramming.com
> > Previous list archive:
http://groups.yahoo.com/group/blindprogramming/
> >
> > More useful links related to this list:
> > For assistance: programming-owner@BlindProgramming.com
> > To subscribe: programming-subscribe@BlindProgramming.com
> > To unsubscribe:
programming-unsubscribe@BlindProgramming.com
> > To send set commands: programming-request@BlindProgramming.com
> > For a list of set commands:
http://www.BlindProgramming.com/set_commands.txt
> >
> > _______________________________________________
> >
> > Programming@blindprogramming.com
> >
http://blindprogramming.com/mailman/listinfo/programming_blindprogramming.co
m
> >
> >
> > _______________________________________________
> > Blinux-list mailing list
> > Blinux-list@redhat.com
> > https://www.redhat.com/mailman/listinfo/blinux-list
> >
> >
>
> --
> Nath
>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Knoppix with braille support (fwd)
` hank smith
@ ` Nath
` The Man With His Guide Dog At The Tent Store
0 siblings, 1 reply; 6+ messages in thread
From: Nath @ UTC (permalink / raw)
To: Linux for blind general discussion
"hank smith" <hank@hanksmith.net> writes:
> can you use speech with noppix?
> if so what do you type in?
No, no speech support available in Knoppix. To have speech support you
will prefer to use oralux http://www.oralux.org
Best regards,
> ----- Original Message -----
> From: "Nath" <nath.ml@free.fr>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Cc: <Dsn1@gmx.de>
> Sent: Tuesday, March 16, 2004 12:01 PM
> Subject: Re: Knoppix with braille support (fwd)
>
>
>> Yes, it is possible.
>> at the Knoppix boot prompt you must enter the following line :
>> knoppix blind brltty=device,port,table
>> Of course replace device with the code représenting your braille display
>> (generally two letters), port with the port where the braille display is
>> connected, and table with the name of the file containing the braille
>> table you want to use.
>> for example to use an handitec braille display on serial port com1 with
>> a french braille table the line must be as follow :
>> knoppix blind brltty=ht,/dev/ttyS0,text.fr-cbifs.tbl
>>
>> Hope this help,
>>
>>
>>
>>
>> "John J. Boyer" <director@chpi.org> writes:
>>
>> > Hello,
>> >
>> > This message is forwarded `from the blindprogramming list. Could one of
>> > you answer these questions and also give the procedure for subscribing
> to
>> > the blinux list. It would be great to get the author on the right list!
>> >
>> > Thanks,
>> > John
>> >
>> >
>> > --
>> > John J. Boyer; Executive Director, Chief Software Developer
>> > Computers to Help People, Inc.
>> > http://www.chpi.org
>> > 825 East Johnson; Madison, WI 53703
>> >
>> >
>> > ---------- Forwarded message ----------
>> > Date: Mon, 15 Mar 2004 21:21:52 +0100
>> > From: Kay <Dsn1@gmx.de>
>> > Reply-To: Programming@blindprogramming.com
>> > To: Programming@blindprogramming.com
>> > Subject: Knoppix with braille support
>> >
>> > Hi,
>> >
>> > is it possible to run the knoppix version of linux with a braille
> display?
>> > And how can I realize that (step by step) if it is possbile?
>> >
>> > Thanks for answers and help
>> >
>> > Kay
>> >
>> >
>> >
>> > Useful links:
>> > If you forget your password, want to change your list settings,
> unsubscribe, etc., go to the List Info page at:
>> >
> http://BlindProgramming.com/mailman/listinfo/programming_blindprogramming.co
> m
>> >
>> > Other blind lists:
> http://www.BlindProgramming.com/ftp/general/blindlists.txt
>> > Web site address: www.BlindProgramming.com
>> > Previous list archive:
> http://groups.yahoo.com/group/blindprogramming/
>> >
>> > More useful links related to this list:
>> > For assistance: programming-owner@BlindProgramming.com
>> > To subscribe: programming-subscribe@BlindProgramming.com
>> > To unsubscribe:
> programming-unsubscribe@BlindProgramming.com
>> > To send set commands: programming-request@BlindProgramming.com
>> > For a list of set commands:
> http://www.BlindProgramming.com/set_commands.txt
>> >
>> > _______________________________________________
>> >
>> > Programming@blindprogramming.com
>> >
> http://blindprogramming.com/mailman/listinfo/programming_blindprogramming.co
> m
>> >
>> >
>> > _______________________________________________
>> > Blinux-list mailing list
>> > Blinux-list@redhat.com
>> > https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>> >
>>
>> --
>> Nath
>>
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
>
--
Nath
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Knoppix with braille support (fwd) John J. Boyer
` Dietmar Segbert
` Nath
` hank smith
` Nath
` The Man With His Guide Dog At The Tent Store
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).