modules.conf invalid lines

* modules.conf invalid lines
@  Igor Gueths
   ` 'Georgina'
  0 siblings, 1 reply; 3+ messages in thread
From: Igor Gueths @  UTC (permalink / raw)
  To: speakup

[-- Attachment #1: Type: TEXT/PLAIN, Size: 331 bytes --]

Hi all. I tried to add in the right parameters in modules.conf for the
correct sound card. When I try to do modprobe snd-cs4236 it tells me that
lines 93-100 are invalid. I looked at the alsa driver docs, and everything
seems to be correct. Can someone look at my modules.conf and see if I am
missing something? Thanks in advance!

[-- Attachment #2: Type: TEXT/PLAIN, Size: 3462 bytes --]

### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-130	softdog
alias char-major-10-175	agpgart
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.

# This used to be quite a list, but upstream merged some Debian patches
# so we currently don't need to do anything here

### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave  > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386
module snd-cs4236.o
snd_index -1
snd_port 0x534
snd_cport 0x120
snd_irq 5
snd_dma1 0

^ permalink raw reply	[flat|nested] 3+ messages in thread