* bind listening on 1 ip address @ Raul A. Gallegos ` Geoff Shang ` Speakup With Kernel Compile Richard Wells 0 siblings, 2 replies; 13+ messages in thread From: Raul A. Gallegos @ UTC (permalink / raw) To: Speakup Mailing-list Hi gang. Does anyone know off hand how to tell bind to listen on only 1 ip address? I can't find it in the bind book anywhere and it's probably something real easy. I have a machine with eth0 as an external internet address while eth1 has an internal lan address. I want bind to only listen on the external one. When I start it up normally it's listening on both. Any help is appreciated. -- We are writing this e-mail to inform you that the mail server is down. Please do not call the help desk for assistance. To see the progress of any outage refer to your e-mail notifications. Raul A. Gallegos - http://www.asmodean.net ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: bind listening on 1 ip address bind listening on 1 ip address Raul A. Gallegos @ ` Geoff Shang ` Raul A. Gallegos ` Speakup With Kernel Compile Richard Wells 1 sibling, 1 reply; 13+ messages in thread From: Geoff Shang @ UTC (permalink / raw) To: Speakup Mailing-list Hi: Well, you could use the hosts.allow and hosts.deny files to control access to your DNS. but I'm curious why you'd want outside people to be able to use your DNS server but not the internal LAN. Not that there's not a good reason for this, it's just that I can't think of one. Geoff. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: bind listening on 1 ip address ` Geoff Shang @ ` Raul A. Gallegos 0 siblings, 0 replies; 13+ messages in thread From: Raul A. Gallegos @ UTC (permalink / raw) To: speakup Geoff Shang said the following on Wed, Jan 23, 2002 at 08:12:41AM +1000: > Hi: > > Well, you could use the hosts.allow and hosts.deny files to control access > to your DNS. but I'm curious why you'd want outside people to be able to > use your DNS server but not the internal LAN. Not that there's not a good > reason for this, it's just that I can't think of one. Actually. The problem I was having was the the primary dns was not successfully transfering zones to the secondary salve server and by looking at the logs it said the transfer was tiing out. I was thinking it was trying to use the external IP instead of the internal one and wanted to make sure it was not being blocked somehow. I only wanted to do that for troubleshooting. It turns out I didn't open port 53 on the firewall. So after calling myself an idiot for overlooking that and seeing everything work as expected I just took a break. Sometimes you get to a point where little easy things become hard when you've been working on 4 projects all at once. Thanks for the suggestion though. Take care. -- We are writing this e-mail to inform you that the mail server is down. Please do not call the help desk for assistance. To see the progress of any outage refer to your e-mail notifications. Raul A. Gallegos - http://www.asmodean.net ^ permalink raw reply [flat|nested] 13+ messages in thread
* Speakup With Kernel Compile bind listening on 1 ip address Raul A. Gallegos ` Geoff Shang @ ` Richard Wells ` Kirk Wood ` (3 more replies) 1 sibling, 4 replies; 13+ messages in thread From: Richard Wells @ UTC (permalink / raw) To: speakup Is it possible to update Speakup without compiling the kernel? I have a stable kernel but I want to get the latest features into it hopefully without compiling it. Thanks _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Speakup With Kernel Compile ` Speakup With Kernel Compile Richard Wells @ ` Kirk Wood ` Geoff Shang ` (2 subsequent siblings) 3 siblings, 0 replies; 13+ messages in thread From: Kirk Wood @ UTC (permalink / raw) To: speakup On Tue, 22 Jan 2002, Richard Wells wrote: > Is it possible to update Speakup without compiling the kernel? I have a > stable kernel but I want to get the latest features into it hopefully > without compiling it. No. That is the short answer. The longer answer is that because speakup is a part of the kernel and the only way to add code to a kernel is to patch the source and recompile you must recompile. That being said, there is no reason to fear this. First, having a stable kernel is no huge feat. IT is really quite simple. Second, if you compiled your current kernal then you merely need to patch it, run make oldconfig (which then asks only new questions) and compile away. You can skip the part of making the modules since you haven't any need for more of them. ======= Kirk Wood Cpt.Kirk@1tree.net Nowlan's Theory: He who hesitates is not only lost, but several miles from the next freeway exit. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Speakup With Kernel Compile ` Speakup With Kernel Compile Richard Wells ` Kirk Wood @ ` Geoff Shang ` Gregory Nowak ` Raul A. Gallegos 3 siblings, 0 replies; 13+ messages in thread From: Geoff Shang @ UTC (permalink / raw) To: speakup Hi: You do have to recompile the kernel in order to update speakup, as speakup is part of the kernel and it's not possible to only compile bits of the kernel. However, unless it's clearly stated, you don't have to update your kernel version to take advantage of speakup updates. ** IMPORTANT **: As of Monday, speakup CVS was broken for the 2.2.x kernels. this may have been fixed, but I don't know that it has so you have been warned. Kirk would like to see this fixed, but he's away all this week so it almost certainly won't happen till he gets back, if it's not happened already. Geoff. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Speakup With Kernel Compile ` Speakup With Kernel Compile Richard Wells ` Kirk Wood ` Geoff Shang @ ` Gregory Nowak ` Raul A. Gallegos 3 siblings, 0 replies; 13+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: speakup No. Greg On Tue, Jan 22, 2002 at 09:44:11PM -0500, Richard Wells wrote: > Is it possible to update Speakup without compiling the kernel? I have a > stable kernel but I want to get the latest features into it hopefully > without compiling it. > > Thanks > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Speakup With Kernel Compile ` Speakup With Kernel Compile Richard Wells ` (2 preceding siblings ...) ` Gregory Nowak @ ` Raul A. Gallegos ` A dumb question Angelo Sonnesso 3 siblings, 1 reply; 13+ messages in thread From: Raul A. Gallegos @ UTC (permalink / raw) To: speakup Richard Wells said the following on Tue, Jan 22, 2002 at 09:44:11PM -0500: > Is it possible to update Speakup without compiling the kernel? I have a > stable kernel but I want to get the latest features into it hopefully > without compiling it. > > Thanks No. You will have to recompile. If you have a stable kernel and it's configured then hopefully you saved your .config file in /usr/src/linux . When I find a good configuration I copy the file to config-raul or something like that. Then I run checkout from /usr/src/linux/driver/char/speakup. Update speakup, then run make mrproper which will clober your .config file. This is why you want to have a backup of it. ONce make mrproper is done copy your backed up config file to .config and run make oldconfig. Then make dep; make bzImage. HTH. -- We are writing this e-mail to inform you that the mail server is down. Please do not call the help desk for assistance. To see the progress of any outage refer to your e-mail notifications. Raul A. Gallegos - http://www.asmodean.net ^ permalink raw reply [flat|nested] 13+ messages in thread
* A dumb question ` Raul A. Gallegos @ ` Angelo Sonnesso ` Play Station 2 and Linux David Arocho ` A dumb question Gregory Nowak 0 siblings, 2 replies; 13+ messages in thread From: Angelo Sonnesso @ UTC (permalink / raw) To: speakup How do you get Linux to connect to your isp via modem? I have configured the network using pppsetup. I asume that you have to connect to the isp, and then bring up pine... Am I off base? I have an internal modem, but I was told that it would work under Linux. Thanks ^ permalink raw reply [flat|nested] 13+ messages in thread
* Play Station 2 and Linux ` A dumb question Angelo Sonnesso @ ` David Arocho ` charles crawford ` A dumb question Gregory Nowak 1 sibling, 1 reply; 13+ messages in thread From: David Arocho @ UTC (permalink / raw) To: speakup [-- Attachment #1: Type: text/plain, Size: 1441 bytes --] Thought some of you might find this of interest. >From the Langa Newsletter: ========== 7) Turn A PlayStation2 Into A Linux PC? Hi Fred, I don't know if you've heard, but Sony plans to release the PS2 Linux kit it's been testing in Japan here in the US. It should be fun to see what people do with this. There's already one website (in Japanese) I found that's apparently running off of a PS2. That site is here http://yoshi.sytes.net/ The kit's said to cost something like $200 dollars and among other things will include a 40gig HD, USB keyboard, and USB mouse. I can see myself jammin' to some MP3's on the home stereo, checking mail, watching TV, and surfing the web all while kicked back in the La-Z-Boy already! ) ---Greg Mathews It's interesting indeed, Greg. This sort of thing has been tried before, but game consoles never had quite enough oomph to function well as PCs. Now, that's changed. The Sony plans are hazy: The official "PS2Linux" home page ( http://www.ps2linux.com/ ) says: The Linux Kit is designed exclusively for the Japanese model of "PS2", SCPH-10000,SCPH-15000 and SCPH-18000. Since these models are for domestic use in Japan, the Linux Kit is only available in Japan. At this point, there is no plan to release the Linux Kit for non-Japanese model of "PS2". Overseas delivery is not available. But there's lots more info here: http://www.google.com/search?q=ps2+linux Click to email this item to a friend [-- Attachment #2: Type: message/rfc822, Size: 1491 bytes --] From: "Angelo Sonnesso" <asonnesso@coastalnet.com> To: <speakup@braille.uwo.ca> Subject: A dumb question Date: Wed, 23 Jan 2002 18:56:35 -0800 Message-ID: <003e01c1a483$21431500$6778f5cd@angeloso> How do you get Linux to connect to your isp via modem? I have configured the network using pppsetup. I asume that you have to connect to the isp, and then bring up pine... Am I off base? I have an internal modem, but I was told that it would work under Linux. Thanks _______________________________________________ Speakup mailing list Speakup@braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Play Station 2 and Linux ` Play Station 2 and Linux David Arocho @ ` charles crawford ` Kirk Wood 0 siblings, 1 reply; 13+ messages in thread From: charles crawford @ UTC (permalink / raw) To: speakup Dave, This idea of play station 2 being a Linux box is fascinating. Would anyone care to speculate on what it would take to make a software synthesizer for speech like Microsoft SAPI? It seems to me that if we could get speakup for example into the system at the get go, then we would get over one big barrier to accceptance within the blind user community. -- Charlie Crawford. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Play Station 2 and Linux ` charles crawford @ ` Kirk Wood 0 siblings, 0 replies; 13+ messages in thread From: Kirk Wood @ UTC (permalink / raw) To: speakup On Thu, 24 Jan 2002, charles crawford wrote: > This idea of play station 2 being a Linux box is fascinating. > Would anyone care to speculate on what it would take to make a software > synthesizer for speech like Microsoft SAPI? It seems to me that if we > could get speakup for example into the system at the get go, then we would > get over one big barrier to accceptance within the blind user community. No speculation is needed here. It would take a butt load of work that is already in progress to finnish up. For that to happen quickly many more hours of volunteer work need to be done. If it was to happen really quickly, those hours would need to come from another person. There is work beign done on a software synth in linux. Also, speakup would need a major change that may happen some year down the road (unless that magical volunteer surfaces and chooses to do that work). ======= Kirk Wood Cpt.Kirk@1tree.net Nowlan's Theory: He who hesitates is not only lost, but several miles from the next freeway exit. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: A dumb question ` A dumb question Angelo Sonnesso ` Play Station 2 and Linux David Arocho @ ` Gregory Nowak 1 sibling, 0 replies; 13+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: speakup You are assuming correctly. I'd recommend reading the ppp howto if you haven't done so already. And your question is not a dumb one. You'll find a few of the same questions in the list archives. Greg On Wed, Jan 23, 2002 at 09:56:35PM -0500, Angelo Sonnesso wrote: > How do you get Linux to connect to your isp via modem? > I have configured the network using pppsetup. > I asume that you have to connect to the isp, and then bring up pine... > Am I off base? > I have an internal modem, but I was told that it would work under Linux. > Thanks > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
bind listening on 1 ip address Raul A. Gallegos
` Geoff Shang
` Raul A. Gallegos
` Speakup With Kernel Compile Richard Wells
` Kirk Wood
` Geoff Shang
` Gregory Nowak
` Raul A. Gallegos
` A dumb question Angelo Sonnesso
` Play Station 2 and Linux David Arocho
` charles crawford
` Kirk Wood
` A dumb question Gregory Nowak
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).