* Re: system hardware information
system hardware information Richard Villa
` Tony Baechler
@ ` William F. Acker WB2FLW +1-303-777-8123
` Janina Sajka
2 siblings, 0 replies; 4+ messages in thread
From: William F. Acker WB2FLW +1-303-777-8123 @ UTC (permalink / raw)
To: speakup
[-- Attachment #1: Type: TEXT/PLAIN, Size: 510 bytes --]
Hi,
Here's a hardware inventory program written in Perl.
HTH.
Bill
On Sat, 10 Nov 2001, Richard Villa wrote:
> I am wondering if anyone knows of a function under Linux that is simular
> to the system information function under windowsx that will let the user
> know what hardware is configured.
>
> Richard
>
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
[-- Attachment #2: Type: TEXT/PLAIN, Size: 10764 bytes --]
#!/usr/bin/perl
#
# Copyright (C) 1998, Larry McVoy (lm@bitmover.com)
# Copyright (C) 1998, 1999, Raju Mathur (raju@linux-delhi.org)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# hinv v 1.4pre2
#
# Changes:
# 1.0 - 1.1
# ---------
# Fri Nov 28 14:28:31 IST 1997
# Added support for IDE disks -- Paul Danset (paul@oz.net),
# Fri Nov 28 14:39:30 IST 1997
# Changed eth scanning routine to explicitely check for an
# ethernet-style address in the line.
# -- Raju Mathur (raju@linux-delhi.org)
# Fri Nov 28 19:02:22 IST 1997
# 1.1-1.1a
# --------
# Small screw-up in the eth code fixed. Thanks, Thomas Gebhardt!
# 1.1a-1.2
# --------
# Mon Dec 1 12:06:55 IST 1997
# Added support for sound devices. I've only checked this out on
# a commercial OSS system, not with the built-in OSS/Linux/Free.
# I'm no hotshot Perl programmer, so if the code looks ugly it's
# your aesthetics which are to blame :-)
#
# 1.2-1.3
# -------
# Memory-handling code improvements
# Floppy code changes
#
# 1.3-1.4pre2
# -------
# Tue Jul 20 20:24:03 IST 1999
# The OSS changes work fine on OSS included in the kernel.
# Changed the IDE code around:
# - No more duplicate IDE's
# - Use a hash instead of an array
# - Change to give more verbose output
# CPU code changed to handle new 2.2.x /proc/cpuinfo style
# Sound code changed to use /proc/sound (doesn't automatically
# load sound drivers).
# Display parallel ports from /proc/parport/*
# Get memory info from /proc/meminfo rather than dmesg (which
# scrolls around)
# Larry has agreed to to GPL the code... Eyahooo!
#
# 1.4pre1 - 1.4pre2
# -----------------
# Sat Sep 11 09:14:24 IST 1999
# Added support for ALSA sound devices (/proc/asound/sndstat)
#
# There may still be problems in the CPU counting code. Please
# send samples of /proc/cpuinfo and hinv output for multi-CPU
# systems.
# -- Raju Mathur (raju@linux-delhi.org)
#
# Author: Larry Mcvoy (lm@bitmover.com)
#
# Maintainer: Raju Mathur (raju@linux-delhi.org)
#
# Try and emulate SGI's hinv command
# We want to figure out the following:
# CPU type, mhz, memory, busses, floppies, disks, tapes, cdroms, ttys,
# networks, graphics, sound
# indy ~ hinv
# Iris Audio Processor: version A2 revision 4.1.0
# 1 175 MHZ IP22 Processor
# FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
# CPU: MIPS R4400 Processor Chip Revision: 6.0
# On-board serial ports: 2
# On-board bi-directional parallel port
# Data cache size: 16 Kbytes
# Instruction cache size: 16 Kbytes
# Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
# Main memory size: 64 Mbytes
# Vino video: unit 0, revision 0
# Integral ISDN: Basic Rate Interface unit 0, revision 1.0
# XPI FDDI controller: xpi0, firmware version 9601221233, SAS
# Integral Ethernet: ec0, version 1
# Integral SCSI controller 0: Version WD33C93B, revision D
# Disk drive: unit 2 on SCSI controller 0
# Disk drive: unit 1 on SCSI controller 0
# Graphics board: Indy 24-bit
# i586 ~ hinv
# Main memory size: 255 Mbytes
# 1 GenuineIntel 00/07 processor
# 2 16550A serial ports
# 1 National Semiconductor PC87306 floppy controller
# 1 1.44M floppy drive
# 1 vga+ graphics device
# 1 parallel port:
# lp0: base 0x378, no irq, no dma, modes SPP,ECP,ECPPS2
# 1 IDE device:
# /dev/hda: ATAPI 32X CD-ROM drive, 128kB Cache
# 1 ethernet interface
# eth0: OEM i82557/i82558 10/100 Ethernet
# 1 SCSI disk
# IBM DNES-309170Y
# ESG-SHV SCA HSBP M6
# Sound devices:
# 1 Audio device
# MAD16 WSS (82C930) (DUPLEX)
# 1 MIDI device
# Mad16/Mozart
# 1 Timer
# System clock
# 1 Mixer
# MAD16 WSS (82C930)
# PCI bus devices:
# Ethernet controller: Intel 82557 (rev 5).
# SCSI storage controller: NCR 53c810 (rev 35).
# VGA compatible controller: Cirrus Logic GD 5480 (rev 35).
# PIC: Intel Unknown device (rev 0).
# ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
# IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
# USB Controller: Intel 82371AB PIIX4 USB (rev 1).
# Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
# Host bridge: Intel Unknown device (rev 3).
# Host bridge: Intel Unknown device (rev 2).
# Host bridge: Intel Unknown device (rev 2).
# SCSI storage controller: NCR 53c896 (rev 1).
# SCSI storage controller: NCR 53c896 (rev 1).
$memsize = ( stat "/proc/kcore" ) [7] || die "Cannot stat /proc/kcore" ;
# Use only int portion of the result on converting to MB.
printf "Main memory size: %d Mbytes\n" , $memsize / 1024 / 1024 + .5 ;
open(FD, "dmesg|") || die "no dmesg";
while (<FD>) {
@_ = split;
if (/^tty/) {
$ttys{$_[$#_]}++;
} elsif (/^Floppy/) {
$floppyRE = "fd[0-9] is ([0-9.MGKB]*)" ;
while ( /$floppyRE/o )
{
$floppy{$1}++ ;
s/$floppyRE// ;
}
} elsif (/^FDC /) {
s/.*is a //;
chop;
$fdc{$_}++;
} elsif (/^scsi : detected/) {
$scsi = $_;
} elsif (/^eth\d.* at .*:..:..:..:..:.*/) {
s/\s*at .*//;
push(@eth, $_);
} elsif (/^(hd[a-z]).*, /) {
$idedev=$1 ;
s/.*:\s*//;
$ide{$idedev} = $_ ;
}
}
open(FD, "/proc/cpuinfo");
while (<FD>) {
@_ = split /\s*:\s*/;
if (/model name/) {
$cpu = $_[$#_];
chomp $cpu ;
$cpus{"$vendor $cpu"}++;
}
if (/vendor/)
{
$vendor = $_[$#_] ;
chomp $vendor ;
}
}
open(FD, "/proc/ioports");
while (<FD>) {
if (/kbd/) {
$kbd++;
} elsif (/vga/) {
@_ = split;
$graphics{$_[$#_]}++;
}
}
close FD ;
foreach $port ( </proc/parport/*> )
{
open FD , "$port/hardware" ;
$str = "" ;
while ( <FD> )
{
@_ = split /\s*:\s*/ ;
chomp $_[$#_] ;
$str .= ", " if $. != 1 ;
if ( $_[$#_] eq "none" )
{
$str .= "no $_[0]" ;
}
else
{
$str .= "$_[0] $_[$#_]" ;
}
}
$nlp++ ;
close FD ;
$lp{chop $port} = $str ;
undef $str ;
}
print $mem if (defined $mem);
foreach $key (keys %cpus) {
print "$cpus{$key} $key processor";
print $cpus{$key} > 1 ? "s\n" : "\n";
}
foreach $key (keys %ttys) {
print "$ttys{$key} $key serial port";
print $ttys{$key} > 1 ? "s\n" : "\n";
}
foreach $key (keys %fdc) {
print "$fdc{$key} $key floppy controller";
print $fdc{$key} > 1 ? "s\n" : "\n";
}
foreach $key (keys %floppy) {
print "$floppy{$key} $key floppy drive";
print $floppy{$key} > 1 ? "s\n" : "\n";
}
foreach $key (keys %graphics) {
print "$graphics{$key} $key graphics device";
print $graphics{$key} > 1 ? "s\n" : "\n";
}
if (defined $kbd) {
print "$kbd keyboard";
print $kbd > 1 ? "s\n" : "\n";
}
if ( $nlp )
{
printf "$nlp parallel port%s:\n" , $nlp == 1 ? "" : "s" ;
}
foreach $keys (sort keys %lp )
{
print " lp$keys: $lp{$keys}\n" ;
}
@ide = sort keys %ide ;
if ($#ide > -1) {
$n = $#ide + 1;
print "$n IDE device";
print $n > 1 ? "s:\n" : ":\n";
foreach $ide (@ide) {
print " /dev/$ide: $ide{$ide}";
}
}
if ($#eth > -1) {
$n = $#eth + 1;
print "$n ethernet interface";
print $n > 1 ? "s\n" : "\n";
foreach $eth (@eth) {
print " $eth";
}
}
if (defined $scsi) {
$scsi =~ s/.*detected //;
$scsi =~ s/ total.//;
print $scsi;
open(FD, "/proc/scsi/scsi");
$_ = <FD>;
while (<FD>) {
next unless /Vendor/;
s/.*Vendor:\s*//;
s/\s*Rev:.*//;
s/Model:\s*//;
print " $_";
}
}
#
# Sound code added by Raju Mathur (raju@linux-delhi.org)
#
if ( open ( FD , "/proc/sound" ) || open ( FD , "/proc/asound/sndstat" ) )
{
$done = 0 ;
while ( <FD> )
{
if ( ! $done )
{
print "Sound devices:\n" ;
$nAudiodev = 0 ;
$nSynthdev = 0 ;
$nMIDIdev = 0 ;
$nTimer = 0 ;
$nMixer = 0 ;
$done = 1 ;
}
if ( /^Audio devices:/ )
{
while ( <FD> )
{
if ( /^$/ )
{
goto break1 ;
}
s/^[0-9]*:\s*// ;
push @Audiodev , $_ ;
$nAudiodev++ ;
}
break1:
}
if ( /^Synth devices:/ )
{
while ( <FD> )
{
if ( /^$/ )
{
goto break2 ;
}
s/^[0-9]*:\s*// ;
push @Synthdev , $_ ;
$nSynthdev++ ;
}
break2:
}
if ( /^Midi devices:/ )
{
while ( <FD> )
{
if ( /^$/ )
{
goto break3 ;
}
s/^[0-9]*:\s*// ;
push @MIDIdev , $_ ;
$nMIDIdev++ ;
}
break3:
}
if ( /^Timers:/ )
{
while ( <FD> )
{
if ( /^$/ )
{
goto break4 ;
}
s/^[0-9]*:\s*// ;
push @Timer , $_ ;
$nTimer++ ;
}
break4:
}
if ( /^Mixers:/ )
{
while ( <FD> )
{
if ( /^$/ )
{
goto break5 ;
}
s/^[0-9]*:\s*// ;
push @Mixer , $_ ;
$nMixer++ ;
}
break5:
}
}
if ( $nAudiodev )
{
printf ( " %d Audio device%s\n" , $nAudiodev ,
$nAudiodev > 1 ? "s" : "" ) ;
while ( $val = shift @Audiodev )
{
print " $val" ;
}
}
if ( $nSynthdev )
{
printf ( " %d Synth device%s\n" , $nSynthdev ,
$nSynthdev > 1 ? "s" : "" ) ;
while ( $val = shift @Synthdev )
{
print " $val" ;
}
}
if ( $nMIDIdev )
{
printf ( " %d MIDI device%s\n" , $nMIDIdev ,
$nMIDIdev > 1 ? "s" : "" ) ;
while ( $val = shift @MIDIdev )
{
print " $val" ;
}
}
if ( $nTimer )
{
printf ( " %d Timer%s\n" , $nTimer , $nTimer > 1 ? "s" : "" ) ;
while ( $val = shift @Timer )
{
print " $val" ;
}
}
if ( $nMixer )
{
printf " %d Mixer%s\n" , $nMixer , $nMixer > 1 ? "s" : "" ;
while ( $val = shift @Mixer )
{
print " $val" ;
}
}
}
open(FD, "/proc/pci");
$done = 0;
while (<FD>) {
if (/^\s*Bus/) {
if ($done == 0) {
print "PCI bus devices:\n";
$done++;
}
$_ = <FD>;
print;
}
}
^ permalink raw reply [flat|nested] 4+ messages in thread