ignore previous message

ignore previous message

[alex wallis]

hi list.
please ignore previous message. my net connection was being weird, i have got the script downloaded and i believe its set up ok
now just have to wait on getting my kernel then I should be good to go.

Re: ignore previous message

[William Hubbs]

Hi Alex,

I just wanted to let you know that the cvs repository has not been
touched in a very long time; all of the speakup development is going on
in a git repository.

The url is http://linux-speakup.org/speakup.git.  I also run a mirror
which is available at git://hubbs.homedns.org/speakup.git.  I believe
there is at least one more mirror, but I'm not sure what the url is.

Once you have git installed, you can get speakup by using the git clone
command with one of the URLs I just mentioned.

If you have any questions about how to do this, let me know.

Thanks,

William

On Sat, Oct 25, 2008 at 05:00:56PM +0100, alex wallis wrote:
> hi list.
> please ignore previous message. my net connection was being weird, i have got the script downloaded and i believe its set up ok
> now just have to wait on getting my kernel then I should be good to go.
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ignore previous message

[alex wallis]

Hi.
thanks for the message about cvs.
is there an equivalent script to the cvs checkout script to do the same for 
the git repository?
also, could you please tell me what commands i'd use in order to check the 
git repository out?
i'm planning to do the checkout and patching with a cygwin environment 
because the distro of linux i'm going to be running doesn't come with a 
screen reader, so i'll need to replace its kernel with one that speaks.
also, i don't think the speakup main page mentions the git repository 
anyware.
----- Original Message ----- 
From: "William Hubbs" <w.d.hubbs@gmail.com>
To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Saturday, October 25, 2008 5:26 PM
Subject: Re: ignore previous message


> Hi Alex,
>
> I just wanted to let you know that the cvs repository has not been
> touched in a very long time; all of the speakup development is going on
> in a git repository.
>
> The url is http://linux-speakup.org/speakup.git.  I also run a mirror
> which is available at git://hubbs.homedns.org/speakup.git.  I believe
> there is at least one more mirror, but I'm not sure what the url is.
>
> Once you have git installed, you can get speakup by using the git clone
> command with one of the URLs I just mentioned.
>
> If you have any questions about how to do this, let me know.
>
> Thanks,
>
> William
>
> On Sat, Oct 25, 2008 at 05:00:56PM +0100, alex wallis wrote:
>> hi list.
>> please ignore previous message. my net connection was being weird, i have 
>> got the script downloaded and i believe its set up ok
>> now just have to wait on getting my kernel then I should be good to go.
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup 

Re: ignore previous message

[William Hubbs]

Is git available on cygwin?  I have no idea if it is available there
since I haven't worked with it at all.  Even if it is, I'm not sure this
would be possible; I haven't ever tried to do it.

Which distro are you looking at running?

William

On Sat, Oct 25, 2008 at 05:58:26PM +0100, alex wallis wrote:
> Hi.
> thanks for the message about cvs.
> is there an equivalent script to the cvs checkout script to do the same for 
> the git repository?
> also, could you please tell me what commands i'd use in order to check the 
> git repository out?
> i'm planning to do the checkout and patching with a cygwin environment 
> because the distro of linux i'm going to be running doesn't come with a 
> screen reader, so i'll need to replace its kernel with one that speaks.
> also, i don't think the speakup main page mentions the git repository 
> anyware.
> ----- Original Message ----- From: "William Hubbs" <w.d.hubbs@gmail.com>
> To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
> Sent: Saturday, October 25, 2008 5:26 PM
> Subject: Re: ignore previous message
>
>
>> Hi Alex,
>>
>> I just wanted to let you know that the cvs repository has not been
>> touched in a very long time; all of the speakup development is going on
>> in a git repository.
>>
>> The url is http://linux-speakup.org/speakup.git.  I also run a mirror
>> which is available at git://hubbs.homedns.org/speakup.git.  I believe
>> there is at least one more mirror, but I'm not sure what the url is.
>>
>> Once you have git installed, you can get speakup by using the git clone
>> command with one of the URLs I just mentioned.
>>
>> If you have any questions about how to do this, let me know.
>>
>> Thanks,
>>
>> William
>>
>> On Sat, Oct 25, 2008 at 05:00:56PM +0100, alex wallis wrote:
>>> hi list.
>>> please ignore previous message. my net connection was being weird, i have 
>>> got the script downloaded and i believe its set up ok
>>> now just have to wait on getting my kernel then I should be good to go.
>>> _______________________________________________
>>> Speakup mailing list
>>> Speakup@braille.uwo.ca
>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup 
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

Re: ignore previous message

[alex wallis]

well svn is available, and in fact, i'm sure git is available, as another 
project i no about used to run a git repository till switching to svn and a 
large number of its users run cygwin environments.
the distro i'm looking at running is based off a slax distribution, which is 
actually based off slackware so in theery i see no reason why speakup can't 
work with it, provided of course that I can get the patching in cygwin to 
work which I don't see a reason for not working.
the distro itself though is a custom one.
----- Original Message ----- 
From: "William Hubbs" <w.d.hubbs@gmail.com>
To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Saturday, October 25, 2008 6:28 PM
Subject: Re: ignore previous message


> Is git available on cygwin?  I have no idea if it is available there
> since I haven't worked with it at all.  Even if it is, I'm not sure this
> would be possible; I haven't ever tried to do it.
>
> Which distro are you looking at running?
>
> William
>
> On Sat, Oct 25, 2008 at 05:58:26PM +0100, alex wallis wrote:
>> Hi.
>> thanks for the message about cvs.
>> is there an equivalent script to the cvs checkout script to do the same 
>> for
>> the git repository?
>> also, could you please tell me what commands i'd use in order to check 
>> the
>> git repository out?
>> i'm planning to do the checkout and patching with a cygwin environment
>> because the distro of linux i'm going to be running doesn't come with a
>> screen reader, so i'll need to replace its kernel with one that speaks.
>> also, i don't think the speakup main page mentions the git repository
>> anyware.
>> ----- Original Message ----- From: "William Hubbs" <w.d.hubbs@gmail.com>
>> To: "Speakup is a screen review system for Linux." 
>> <speakup@braille.uwo.ca>
>> Sent: Saturday, October 25, 2008 5:26 PM
>> Subject: Re: ignore previous message
>>
>>
>>> Hi Alex,
>>>
>>> I just wanted to let you know that the cvs repository has not been
>>> touched in a very long time; all of the speakup development is going on
>>> in a git repository.
>>>
>>> The url is http://linux-speakup.org/speakup.git.  I also run a mirror
>>> which is available at git://hubbs.homedns.org/speakup.git.  I believe
>>> there is at least one more mirror, but I'm not sure what the url is.
>>>
>>> Once you have git installed, you can get speakup by using the git clone
>>> command with one of the URLs I just mentioned.
>>>
>>> If you have any questions about how to do this, let me know.
>>>
>>> Thanks,
>>>
>>> William
>>>
>>> On Sat, Oct 25, 2008 at 05:00:56PM +0100, alex wallis wrote:
>>>> hi list.
>>>> please ignore previous message. my net connection was being weird, i 
>>>> have
>>>> got the script downloaded and i believe its set up ok
>>>> now just have to wait on getting my kernel then I should be good to go.
>>>> _______________________________________________
>>>> Speakup mailing list
>>>> Speakup@braille.uwo.ca
>>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>> _______________________________________________
>>> Speakup mailing list
>>> Speakup@braille.uwo.ca
>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup@braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup 

Re: ignore previous message

[Gregory Nowak]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Sat, Oct 25, 2008 at 11:26:23AM -0500, William Hubbs wrote:
> I believe
> there is at least one more mirror, but I'm not sure what the url is.

http://members.cox.net/cmbrannon/speakup.git

As for building a linux kernel under cygwin, I have to add my doubts
here, echoing what William has said. Though if it works, that would be
a nice surprise I guess, but I doubt that it will.

Greg


- -- 
web site: http://www.romuald.net.eu.org
gpg public key: http://www.romuald.net.eu.org/pubkey.asc
skype: gregn1
(authorization required, add me to your contacts list first)

- --
Free domains: http://www.eu.org/ or mail dns-manager@EU.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkkDeb0ACgkQ7s9z/XlyUyD62ACdHBYDs5xAAbQnSnSoqviRxKBO
RPQAoN1RiohH1PiTVHPzjZPlKlfGLkYZ
=5Y6F
-----END PGP SIGNATURE-----

Re: ignore previous message

[Gaijin]

[-- Attachment #1: ignore previous message.eml.txt --]
[-- Type: text/plain, Size: 685 bytes --]

> Free domains: http://www.eu.org/ or mail dns-manager@EU.org

	Hello all,

	Just wondering if anyone is reading this.  My ISP switched to gmail, and I haven't been able to send mail for more than a month now.  Found a wiki telling me how to add a mail router to exim4's configs, but it's only good for one account, and doesn't use /etc/exim4/passwd.client, so I'm back to Thunderbird and pasting things into the silent editor, saving, reading the saved message to see if it worked, then sending the message.  As it is, clearwire is no longer accessible, so I'd advise against signing up with them  Anyway, I'm just wondering if anyone is seeing me again yet.  TIA,

		Michael
 

Re: ignore previous message

[Gregory Nowak]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Yes, your post came through here just fine.

Greg


On Sat, Oct 25, 2008 at 02:01:05PM -0700, Gaijin wrote:
> 	Hello all,
> 
> 	Just wondering if anyone is reading this.  My ISP switched to gmail, and I haven't been able to send mail for more than a month now.  Found a wiki telling me how to add a mail router to exim4's configs, but it's only good for one account, and doesn't use /etc/exim4/passwd.client, so I'm back to Thunderbird and pasting things into the silent editor, saving, reading the saved message to see if it worked, then sending the message.  As it is, clearwire is no longer accessible, so I'd advise against signing up with them  Anyway, I'm just wondering if anyone is seeing me again yet.  TIA,
> 
> 		Michael
>  
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 

- -- 
web site: http://www.romuald.net.eu.org
gpg public key: http://www.romuald.net.eu.org/pubkey.asc
skype: gregn1
(authorization required, add me to your contacts list first)

- --
Free domains: http://www.eu.org/ or mail dns-manager@EU.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkkDjVAACgkQ7s9z/XlyUyBHagCgz2UbSa3jXqog/gB8OjvfEFBs
ZIsAn1AGtKkGeHHzM/tMqsfapfRAFQzf
=stqi
-----END PGP SIGNATURE-----

Re: ignore previous message

[Michael Whapples]

I don't actually know regarding cygwyn and compiling a kernel, although
my gut feeling would be that you can't compile a working kernel using
cygwyn. Would it be possible to compile the kernel in one distro (eg.
GRML) and then move that kernel to another distro (eg. this custom one
mentioned in this thread)?

Michael Whapples
On Sat, 2008-10-25 at 12:55 -0700, Gregory Nowak wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On Sat, Oct 25, 2008 at 11:26:23AM -0500, William Hubbs wrote:
> > I believe
> > there is at least one more mirror, but I'm not sure what the url is.
> 
> http://members.cox.net/cmbrannon/speakup.git
> 
> As for building a linux kernel under cygwin, I have to add my doubts
> here, echoing what William has said. Though if it works, that would be
> a nice surprise I guess, but I doubt that it will.
> 
> Greg
> 
> 
> 
> - -- 
> web site: http://www.romuald.net.eu.org
> gpg public key: http://www.romuald.net.eu.org/pubkey.asc
> skype: gregn1
> (authorization required, add me to your contacts list first)
> 
> - --
> Free domains: http://www.eu.org/ or mail dns-manager@EU.org
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> 
> iEYEARECAAYFAkkDeb0ACgkQ7s9z/XlyUyD62ACdHBYDs5xAAbQnSnSoqviRxKBO
> RPQAoN1RiohH1PiTVHPzjZPlKlfGLkYZ
> =5Y6F
> -----END PGP SIGNATURE-----
>