[PATCH] Staging: speakup: Fix getting port information

[PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

5e6dc54 broke the port information in the speakup driver:
SERIAL_PORT_DFNS only gets defined if asm/serial.h is included.

Along the way, make sure that we do have information for the requested
serial port number (index)

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

--- a/drivers/staging/speakup/serialio.c
+++ b/drivers/staging/speakup/serialio.c
@@ -6,6 +6,9 @@
 #include "spk_priv.h"
 #include "serialio.h"
 
+#include <linux/serial_core.h>
+#include <asm/serial.h>
+
 #ifndef SERIAL_PORT_DFNS
 #define SERIAL_PORT_DFNS
 #endif
@@ -26,6 +29,11 @@ const struct old_serial_port *spk_serial
 	const struct old_serial_port *ser = rs_table + index;
 	int err;
 
+	if (index > sizeof(rs_table) / sizeof(*rs_table)) {
+		pr_info("no port info for ttyS%d\n", index);
+		return NULL;
+	}
+
 	/*	Divisor, bytesize and parity */
 	quot = ser->baud_base / baud;
 	cval = cflag & (CSIZE | CSTOPB);

Re: [PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

Samuel Thibault, on Sun 03 Jan 2016 00:25:29 +0100, wrote:
> 5e6dc54 broke the port information in the speakup driver:
> SERIAL_PORT_DFNS only gets defined if asm/serial.h is included.
> 
> Along the way, make sure that we do have information for the requested
> serial port number (index)

(It'd be good to get this into 4.4 and 4.3.4).

> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
> 
> --- a/drivers/staging/speakup/serialio.c
> +++ b/drivers/staging/speakup/serialio.c
> @@ -6,6 +6,9 @@
>  #include "spk_priv.h"
>  #include "serialio.h"
>  
> +#include <linux/serial_core.h>
> +#include <asm/serial.h>
> +
>  #ifndef SERIAL_PORT_DFNS
>  #define SERIAL_PORT_DFNS
>  #endif
> @@ -26,6 +29,11 @@ const struct old_serial_port *spk_serial
>  	const struct old_serial_port *ser = rs_table + index;
>  	int err;
>  
> +	if (index > sizeof(rs_table) / sizeof(*rs_table)) {
> +		pr_info("no port info for ttyS%d\n", index);
> +		return NULL;
> +	}
> +
>  	/*	Divisor, bytesize and parity */
>  	quot = ser->baud_base / baud;
>  	cval = cflag & (CSIZE | CSTOPB);

-- 
Samuel
AUTHOR
     FvwmM4 is the result of a random  bit  mutation  on  a  hard
     disk,  presumably  a  result  of  a  cosmic-ray or some such
     thing.
(extrait de la page de man de FvwmM4)

Re: [PATCH] Staging: speakup: Fix getting port information

[covici]

I had a patch which also worked, but yours may be better -- I enclose it
here for your information.

--- drivers/staging/speakup/serialio.h.old	2015-08-30 14:34:09.000000000 -0400
+++ drivers/staging/speakup/serialio.h	2015-10-07 06:27:04.880829874 -0400
@@ -1,22 +1,24 @@
 #ifndef _SPEAKUP_SERIAL_H
 #define _SPEAKUP_SERIAL_H
 
+#include <linux/serial_core.h>
 #include <linux/serial.h>	/* for rs_table, serial constants */
 #include <linux/serial_reg.h>	/* for more serial constants */
 #ifndef __sparc__
-#include <linux/serial.h>
+#include <asm/serial.h>
 #endif
 
 /*
  * this is cut&paste from 8250.h. Get rid of the structure, the definitions
  * and this whole broken driver.
  */
+
 struct old_serial_port {
 	unsigned int uart; /* unused */
 	unsigned int baud_base;
 	unsigned int port;
 	unsigned int irq;
-	unsigned int flags; /* unused */
+  upf_t        flags; /*unused*/
 };
 
 /* countdown values for serial timeouts in us */
@@ -34,7 +36,6 @@
 #define SPK_TIMEOUT 100
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-#define spk_serial_tx_busy() \
-	((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+#define spk_serial_tx_busy() ((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
 
 #endif

Samuel Thibault <samuel.thibault@ens-lyon.org> wrote:

> 5e6dc54 broke the port information in the speakup driver:
> SERIAL_PORT_DFNS only gets defined if asm/serial.h is included.
> 
> Along the way, make sure that we do have information for the requested
> serial port number (index)
> 
> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
> 
> --- a/drivers/staging/speakup/serialio.c
> +++ b/drivers/staging/speakup/serialio.c
> @@ -6,6 +6,9 @@
>  #include "spk_priv.h"
>  #include "serialio.h"
>  
> +#include <linux/serial_core.h>
> +#include <asm/serial.h>
> +
>  #ifndef SERIAL_PORT_DFNS
>  #define SERIAL_PORT_DFNS
>  #endif
> @@ -26,6 +29,11 @@ const struct old_serial_port *spk_serial
>  	const struct old_serial_port *ser = rs_table + index;
>  	int err;
>  
> +	if (index > sizeof(rs_table) / sizeof(*rs_table)) {
> +		pr_info("no port info for ttyS%d\n", index);
> +		return NULL;
> +	}
> +
>  	/*	Divisor, bytesize and parity */
>  	quot = ser->baud_base / baud;
>  	cval = cflag & (CSIZE | CSTOPB);
> _______________________________________________
> Speakup mailing list
> Speakup@linux-speakup.org
> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
> 

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@ccs.covici.com

Re: [PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

covici@ccs.covici.com, on Sat 02 Jan 2016 19:10:36 -0500, wrote:
> I had a patch which also worked, but yours may be better -- I enclose it
> here for your information.

Well, it's not up to serialio.h to include things for serialio.c. That
however makes me realize that the culprit is actually
f79b0d9 (which actually doesn't make much sense since linux/serial.h is
getting included a couple of lines above...).

I don't know what this "use <linux/serial.h> instead <asm/serial.h>"
warning is about, but *no* header in include/ includes asm/serial.h, so
there is no way to get the SERIAL_PORT_DFNS definition just by including
linux/serial.h, we really need asm/serial.h, just like 8250*.c do.

So we really need serialio.c to include linux/serial_core.h then
asm/serial.h, as my patch does.

Samuel

Re: [PATCH] Staging: speakup: Fix getting port information

[covici]

Well, OK with me, I will use yours instead because I don't know if they
will backport the thing, thanks so much for doing this.

Samuel Thibault <samuel.thibault@ens-lyon.org> wrote:

> covici@ccs.covici.com, on Sat 02 Jan 2016 19:10:36 -0500, wrote:
> > I had a patch which also worked, but yours may be better -- I enclose it
> > here for your information.
> 
> Well, it's not up to serialio.h to include things for serialio.c. That
> however makes me realize that the culprit is actually
> f79b0d9 (which actually doesn't make much sense since linux/serial.h is
> getting included a couple of lines above...).
> 
> I don't know what this "use <linux/serial.h> instead <asm/serial.h>"
> warning is about, but *no* header in include/ includes asm/serial.h, so
> there is no way to get the SERIAL_PORT_DFNS definition just by including
> linux/serial.h, we really need asm/serial.h, just like 8250*.c do.
> 
> So we really need serialio.c to include linux/serial_core.h then
> asm/serial.h, as my patch does.
> 
> Samuel
> _______________________________________________
> Speakup mailing list
> Speakup@linux-speakup.org
> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
> 

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@ccs.covici.com

Re: [PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

Ping?

Samuel Thibault, on Fri 15 Jan 2016 00:47:41 +0100, wrote:
> Commit f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h>
> instead of <asm/serial.h>") broke the port information in the speakup
> driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included,
> and no other header includes asm/serial.h.
> 
> We here make sure serialio.c does get the arch-specific definition of
> SERIAL_PORT_DFNS from asm/serial.h, if any.
> 
> Along the way, this makes sure that we do have information for the
> requested serial port number (index)
> 
> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
> Fixes: f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>")
> 
> --- a/drivers/staging/speakup/serialio.c
> +++ b/drivers/staging/speakup/serialio.c
> @@ -6,6 +6,11 @@
>  #include "spk_priv.h"
>  #include "serialio.h"
>  
> +#include <linux/serial_core.h>
> +/* WARNING:  Do not change this to <linux/serial.h> without testing that
> + * SERIAL_PORT_DFNS does get defined to the appropriate value. */
> +#include <asm/serial.h>
> +
>  #ifndef SERIAL_PORT_DFNS
>  #define SERIAL_PORT_DFNS
>  #endif
> @@ -23,9 +28,15 @@ const struct old_serial_port *spk_serial
>  	int baud = 9600, quot = 0;
>  	unsigned int cval = 0;
>  	int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
> -	const struct old_serial_port *ser = rs_table + index;
> +	const struct old_serial_port *ser;
>  	int err;
>  
> +	if (index >= ARRAY_SIZE(rs_table)) {
> +		pr_info("no port info for ttyS%d\n", index);
> +		return NULL;
> +	}
> +	ser = rs_table + index;
> +
>  	/*	Divisor, bytesize and parity */
>  	quot = ser->baud_base / baud;
>  	cval = cflag & (CSIZE | CSTOPB);

[PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

Commit f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h>
instead of <asm/serial.h>") broke the port information in the speakup
driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included,
and no other header includes asm/serial.h.

We here make sure serialio.c does get the arch-specific definition of
SERIAL_PORT_DFNS from asm/serial.h, if any.

Along the way, this makes sure that we do have information for the
requested serial port number (index)

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>")

--- a/drivers/staging/speakup/serialio.c
+++ b/drivers/staging/speakup/serialio.c
@@ -6,6 +6,11 @@
 #include "spk_priv.h"
 #include "serialio.h"
 
+#include <linux/serial_core.h>
+/* WARNING:  Do not change this to <linux/serial.h> without testing that
+ * SERIAL_PORT_DFNS does get defined to the appropriate value. */
+#include <asm/serial.h>
+
 #ifndef SERIAL_PORT_DFNS
 #define SERIAL_PORT_DFNS
 #endif
@@ -23,9 +28,15 @@ const struct old_serial_port *spk_serial
 	int baud = 9600, quot = 0;
 	unsigned int cval = 0;
 	int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
-	const struct old_serial_port *ser = rs_table + index;
+	const struct old_serial_port *ser;
 	int err;
 
+	if (index >= ARRAY_SIZE(rs_table)) {
+		pr_info("no port info for ttyS%d\n", index);
+		return NULL;
+	}
+	ser = rs_table + index;
+
 	/*	Divisor, bytesize and parity */
 	quot = ser->baud_base / baud;
 	cval = cflag & (CSIZE | CSTOPB);

[PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

Patch f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h>
instead of <asm/serial.h>") broke the port information in the speakup
driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included,
and no other header includes asm/serial.h.

We here make sure serialio.c does get the arch-specific definition of
SERIAL_PORT_DFNS from asm/serial.h, if any.

Along the way, this makes sure that we do have information for the
requested serial port number (index)

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>")

--- a/drivers/staging/speakup/serialio.c
+++ b/drivers/staging/speakup/serialio.c
@@ -6,6 +6,9 @@
 #include "spk_priv.h"
 #include "serialio.h"
 
+#include <linux/serial_core.h>
+#include <asm/serial.h>
+
 #ifndef SERIAL_PORT_DFNS
 #define SERIAL_PORT_DFNS
 #endif
@@ -23,9 +26,15 @@ const struct old_serial_port *spk_serial
 	int baud = 9600, quot = 0;
 	unsigned int cval = 0;
 	int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
-	const struct old_serial_port *ser = rs_table + index;
+	const struct old_serial_port *ser;
 	int err;
 
+	if (index >= ARRAY_SIZE(rs_table)) {
+		pr_info("no port info for ttyS%d\n", index);
+		return NULL;
+	}
+	ser = rs_table + index;
+
 	/*	Divisor, bytesize and parity */
 	quot = ser->baud_base / baud;
 	cval = cflag & (CSIZE | CSTOPB);

Re: [PATCH] Staging: speakup: Fix getting port information

[Samuel Thibault]

Mmm, sorry.  I don't submit patches often enough, so that each time I do
it, there are new things to know about it :)

Thanks for the comments,
Samuel