* how to make settings 'stick' @ David ` Rob Hudson 0 siblings, 1 reply; 9+ messages in thread From: David @ UTC (permalink / raw) To: speakup Hi there - Every time when I reboot my system I have to go and adjust the Speakup settings like speech speed and volume and things like that, is there a way to make these settings 'stick' so it will not be resetted at reboot? thanks. --David ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' how to make settings 'stick' David @ ` Rob Hudson ` David ` Steve Holmes 0 siblings, 2 replies; 9+ messages in thread From: Rob Hudson @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Use the speakupconf script. It comes as part of the speakup sources, under the tools directory. Copy it to a location in your path, then set up speakup the way you like it. When you run speakupconf save as root, a directory called /etc/speakup is created. When you run it as a regular user, you get a directory called .speakup under your home directory. Once you have the settings saved, you can then load them again with speakupconf load. You can put that command in your .bashrc file so you get all your settings back upon login. ----- Original Message ----- From: "David" <BearSFO@PacBell.NET> To: <speakup@linux-speakup.org> Sent: Sunday, December 21, 2014 12:31 AM Subject: how to make settings 'stick' > > Hi there - > > Every time when I reboot my system I have to go and adjust the Speakup > settings like speech speed and volume and things like that, is there a way > to make these settings 'stick' so it will not be resetted at reboot? > > thanks. > > --David > > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Rob Hudson @ ` David ` Steve Holmes 1 sibling, 0 replies; 9+ messages in thread From: David @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Thanks Rob I will look for the script and give that a try. --David At 02:06 AM 12/21/2014, you wrote: >Use the speakupconf script. It comes as part of the speakup sources, >under the tools directory. Copy it to a location in your path, then >set up speakup the way you like it. When you run speakupconf save as >root, a directory called /etc/speakup is created. When you run it as >a regular user, you get a directory called .speakup under your home >directory. Once you have the settings saved, you can then load them >again with speakupconf load. You can put that command in your >.bashrc file so you get all your settings back upon login. ----- >Original Message ----- From: "David" <BearSFO@PacBell.NET> To: ><speakup@linux-speakup.org> Sent: Sunday, December 21, 2014 12:31 AM >Subject: how to make settings 'stick' > > Hi there - > > Every time >when I reboot my system I have to go and adjust the Speakup > >settings like speech speed and volume and things like that, is there >a way > to make these settings 'stick' so it will not be resetted at >reboot? > > thanks. > > --David > > >_______________________________________________ > Speakup mailing >list > Speakup@linux-speakup.org > >http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > >_______________________________________________ Speakup mailing list >Speakup@linux-speakup.org >http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup </x-flowed> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Rob Hudson ` David @ ` Steve Holmes ` Chuck Hallenbeck 1 sibling, 1 reply; 9+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup Anyone else experiencing a problem where you can't use speakupconf as a normal user? After a recent kernel update, I find that I keep getting permission errors when I use a normal user to set speakup settings from speakupconf. If I do it from root, the script works fine. I used to be able to do this from regular users but now now. Any ideas? On 12/21/14 02:06, Rob Hudson wrote: > Use the speakupconf script. > It comes as part of the speakup sources, under the tools directory. Copy > it to a location in your path, then set up speakup the way you like it. > When you run speakupconf save as root, a directory called /etc/speakup > is created. When you run it as a regular user, you get a directory > called .speakup under your home directory. > Once you have the settings saved, you can then load them again with > speakupconf load. You can put that command in your .bashrc file so you > get all your settings back upon login. > ----- Original Message ----- From: "David" <BearSFO@PacBell.NET> > To: <speakup@linux-speakup.org> > Sent: Sunday, December 21, 2014 12:31 AM > Subject: how to make settings 'stick' > > >> >> Hi there - >> >> Every time when I reboot my system I have to go and adjust the Speakup >> settings like speech speed and volume and things like that, is there a >> way to make these settings 'stick' so it will not be resetted at reboot? >> >> thanks. >> >> --David >> >> _______________________________________________ >> Speakup mailing list >> Speakup@linux-speakup.org >> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup >> > > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Steve Holmes @ ` Chuck Hallenbeck ` Steve Holmes 0 siblings, 1 reply; 9+ messages in thread From: Chuck Hallenbeck @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Steve, I am using kernel 3.17.6-1-arch, and do not have that difficulty. Normal users can use speakupconf without difficulty on this system. HTH, and Merry Christmas, Chuck On Wed, 24 Dec 2014, Steve Holmes wrote: > > Anyone else experiencing a problem where you can't use speakupconf as a > normal user? After a recent kernel update, I find that I keep getting > permission errors when I use a normal user to set speakup settings from > speakupconf. If I do it from root, the script works fine. I used to be > able to do this from regular users but now now. > > Any ideas? > > On 12/21/14 02:06, Rob Hudson wrote: > > Use the speakupconf script. > > It comes as part of the speakup sources, under the tools directory. Copy > > it to a location in your path, then set up speakup the way you like it. > > When you run speakupconf save as root, a directory called /etc/speakup > > is created. When you run it as a regular user, you get a directory > > called .speakup under your home directory. > > Once you have the settings saved, you can then load them again with > > speakupconf load. You can put that command in your .bashrc file so you > > get all your settings back upon login. > > ----- Original Message ----- From: "David" <BearSFO@PacBell.NET> > > To: <speakup@linux-speakup.org> > > Sent: Sunday, December 21, 2014 12:31 AM > > Subject: how to make settings 'stick' > > > > > >> > >> Hi there - > >> > >> Every time when I reboot my system I have to go and adjust the Speakup > >> settings like speech speed and volume and things like that, is there a > >> way to make these settings 'stick' so it will not be resetted at reboot? > >> > >> thanks. > >> > >> --David > >> > >> _______________________________________________ > >> Speakup mailing list > >> Speakup@linux-speakup.org > >> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > >> > > > > _______________________________________________ > > Speakup mailing list > > Speakup@linux-speakup.org > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > -- Scent from my ShoePhone ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Chuck Hallenbeck @ ` Steve Holmes ` Chuck Hallenbeck ` Doug Smith 0 siblings, 2 replies; 9+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup Hum, I wonder what the issue could be then. I'm also using a fully updated arch box right now. What happens when I first boot the system and login to a normal user account, I run speakupconf and no speakup parameters change. When I login as root, speakupconf works fine. When I try and update any speakup parms manually from normal user, that's when I get a "permission denied" error. I don't need to change any options on speakupconf, do I? Oh, and when I mean update speakup parms, I mean echoing an appropriate value into the /sys/accessibility/speakup/* logical files. On Thu, Dec 25, 2014 at 03:17:23AM -0500, Chuck Hallenbeck wrote: > Steve, > > I am using kernel 3.17.6-1-arch, and do not have that difficulty. Normal > users can use speakupconf without difficulty on this system. > > HTH, and Merry Christmas, > > Chuck > > On Wed, 24 Dec 2014, Steve Holmes wrote: > > > > > Anyone else experiencing a problem where you can't use speakupconf as a > > normal user? After a recent kernel update, I find that I keep getting > > permission errors when I use a normal user to set speakup settings from > > speakupconf. If I do it from root, the script works fine. I used to be > > able to do this from regular users but now now. > > > > Any ideas? > > > > On 12/21/14 02:06, Rob Hudson wrote: > > > Use the speakupconf script. > > > It comes as part of the speakup sources, under the tools directory. Copy > > > it to a location in your path, then set up speakup the way you like it. > > > When you run speakupconf save as root, a directory called /etc/speakup > > > is created. When you run it as a regular user, you get a directory > > > called .speakup under your home directory. > > > Once you have the settings saved, you can then load them again with > > > speakupconf load. You can put that command in your .bashrc file so you > > > get all your settings back upon login. > > > ----- Original Message ----- From: "David" <BearSFO@PacBell.NET> > > > To: <speakup@linux-speakup.org> > > > Sent: Sunday, December 21, 2014 12:31 AM > > > Subject: how to make settings 'stick' > > > > > > > > >> > > >> Hi there - > > >> > > >> Every time when I reboot my system I have to go and adjust the Speakup > > >> settings like speech speed and volume and things like that, is there a > > >> way to make these settings 'stick' so it will not be resetted at reboot? > > >> > > >> thanks. > > >> > > >> --David > > >> > > >> _______________________________________________ > > >> Speakup mailing list > > >> Speakup@linux-speakup.org > > >> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > >> > > > > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@linux-speakup.org > > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > _______________________________________________ > > Speakup mailing list > > Speakup@linux-speakup.org > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > > > -- > > Scent from my ShoePhone > > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Steve Holmes @ ` Chuck Hallenbeck ` Doug Smith 1 sibling, 0 replies; 9+ messages in thread From: Chuck Hallenbeck @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. I have never changed any of the speakupconf options. I call speakupconf from my normal user .bash_profile, and from nowhere else, and it always works. When I run it manually, either from that user or another normal user, or from root, it always works. Sure sounds like something funny is going on. On Fri, 26 Dec 2014, Steve Holmes wrote: > Hum, I wonder what the issue could be then. I'm also using a fully > updated arch box right now. What happens when I first boot the system > and login to a normal user account, I run speakupconf and no speakup > parameters change. When I login as root, speakupconf works fine. When > I try and update any speakup parms manually from normal user, that's > when I get a "permission denied" error. I don't need to change any > options on speakupconf, do I? > > Oh, and when I mean update speakup parms, I mean echoing an > appropriate value into the /sys/accessibility/speakup/* logical files. > > On Thu, Dec 25, 2014 at 03:17:23AM -0500, Chuck Hallenbeck wrote: > > Steve, > > > > I am using kernel 3.17.6-1-arch, and do not have that difficulty. Normal > > users can use speakupconf without difficulty on this system. > > > > HTH, and Merry Christmas, > > > > Chuck > > > > On Wed, 24 Dec 2014, Steve Holmes wrote: > > > > > > > > Anyone else experiencing a problem where you can't use speakupconf as a > > > normal user? After a recent kernel update, I find that I keep getting > > > permission errors when I use a normal user to set speakup settings from > > > speakupconf. If I do it from root, the script works fine. I used to be > > > able to do this from regular users but now now. > > > > > > Any ideas? > > > > > > On 12/21/14 02:06, Rob Hudson wrote: > > > > Use the speakupconf script. > > > > It comes as part of the speakup sources, under the tools directory. Copy > > > > it to a location in your path, then set up speakup the way you like it. > > > > When you run speakupconf save as root, a directory called /etc/speakup > > > > is created. When you run it as a regular user, you get a directory > > > > called .speakup under your home directory. > > > > Once you have the settings saved, you can then load them again with > > > > speakupconf load. You can put that command in your .bashrc file so you > > > > get all your settings back upon login. > > > > ----- Original Message ----- From: "David" <BearSFO@PacBell.NET> > > > > To: <speakup@linux-speakup.org> > > > > Sent: Sunday, December 21, 2014 12:31 AM > > > > Subject: how to make settings 'stick' > > > > > > > > > > > >> > > > >> Hi there - > > > >> > > > >> Every time when I reboot my system I have to go and adjust the Speakup > > > >> settings like speech speed and volume and things like that, is there a > > > >> way to make these settings 'stick' so it will not be resetted at reboot? > > > >> > > > >> thanks. > > > >> > > > >> --David > > > >> > > > >> _______________________________________________ > > > >> Speakup mailing list > > > >> Speakup@linux-speakup.org > > > >> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > > >> > > > > > > > > _______________________________________________ > > > > Speakup mailing list > > > > Speakup@linux-speakup.org > > > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > > _______________________________________________ > > > Speakup mailing list > > > Speakup@linux-speakup.org > > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > > > > > > > -- > > > > Scent from my ShoePhone > > > > _______________________________________________ > > Speakup mailing list > > Speakup@linux-speakup.org > > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup > -- Scent from my ShoePhone ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Steve Holmes ` Chuck Hallenbeck @ ` Doug Smith ` Steve Holmes 1 sibling, 1 reply; 9+ messages in thread From: Doug Smith @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. I think what he is trying to do is to echo the settings into the /proc/speakup or whatever they are called parameters. You are right. If he would use speakupconf he would have no difficulties. I have speakup working on a fully updated sonar linux system which is the same, basically, as a working arch system and all I had to do when trying to set speakup parameters the way I wanted them was to just adjust the volume, speed and whatever other settings I wanted the way I wanted them then do this: speakupconf save This will put a .speakup directory into his home folder and allow him to append the following to his .bashrc file: speakupconf load When he logs in, all the parameters will be set back the way he wants them. Hope this helps and happy New Year. -- Doug Smith: Special Agent S.W.A.T Spiritual Warfare and Advanced Technology Forever serving our LORD and SAVIOUR, JESUS CHRIST. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to make settings 'stick' ` Doug Smith @ ` Steve Holmes 0 siblings, 0 replies; 9+ messages in thread From: Steve Holmes @ UTC (permalink / raw) To: speakup I have those all in place, I've used speakupconf for years; It's just recently, that the parms don't change when I run the script. I should clarify a bit more on this. When I run speakupconf from command line in normal user, speakup parms do not change and I get no errors. But if I manually echo "7" to /sys/accessibility/speakup/soft/rate, I get an error message saying that permission is denied. So I figure if these permissions aren't right, then speakupconf won't work either. Is this clearer now? On Fri, Dec 26, 2014 at 03:55:35PM -0500, Doug Smith wrote: > I think what he is trying to do is to echo the settings into the /proc/speakup or whatever they are called parameters. You are right. If he would > use speakupconf he would have no difficulties. I have speakup working on a fully updated sonar linux system which is the same, basically, as a > working arch system and all I had to do when trying to set speakup parameters the way I wanted them was to just adjust the volume, speed and whatever > other settings I wanted the way I wanted them then do this: > > speakupconf save > > This will put a .speakup directory into his home folder and allow him to append the following to his .bashrc file: > > speakupconf load > > When he logs in, all the parameters will be set back the way he wants them. > > > > Hope this helps and happy New Year. > > > > > -- > Doug Smith: Special Agent > S.W.A.T Spiritual Warfare and Advanced Technology > Forever serving our LORD and SAVIOUR, JESUS CHRIST. > > _______________________________________________ > Speakup mailing list > Speakup@linux-speakup.org > http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
how to make settings 'stick' David
` Rob Hudson
` David
` Steve Holmes
` Chuck Hallenbeck
` Steve Holmes
` Chuck Hallenbeck
` Doug Smith
` Steve Holmes
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).