* hardware question, power button not working on system. @ Tyler Littlefield ` Alex Snow ` Gabriel Vega 0 siblings, 2 replies; 14+ messages in thread From: Tyler Littlefield @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. hello list, I have a problem. The power button on my linux system doesn't work. I used to just leave it on like 24-seven, but, that doesn't really work, because the power went off, and now I can't turn it on. I opened the computer, and I see the wire that goes to the button that I could push to reboot the computer, running to the mother board. then, I found the wire that runs to the power button. Its a little tiney rectangular plug. It looks like it will fit over two pins, well, I know it will. There is a little formation of pins in a square shape rite above where the reboot chord is plugged in. Is that where that should go? If so, how should it plug in? If not, where should I plug it in? Thanks, ~~TheCreator~~ website: http://tysplace.shaned.net msn: compgeek134@hotmail.com aim: st8amnd2005 skype: st8amnd127 moo coder/wizard and administrator ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. hardware question, power button not working on system Tyler Littlefield @ ` Alex Snow ` Tyler Littlefield ` (2 more replies) ` Gabriel Vega 1 sibling, 3 replies; 14+ messages in thread From: Alex Snow @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. You really need sited assistence to do that. Every motherboard is different as far as the connecters go and you might fry something if you plug it in wrong. One way I found to tell what pins the power switch is (I don't recomend this unless you know what you're doing) is to take a paperclip or other small piece of metal and use it to connect pairs of pins in the connecter until the machine powers on. On Sun, Jul 02, 2006 at 02:26:10PM -0600, Tyler Littlefield wrote: > hello list, > I have a problem. > The power button on my linux system doesn't work. > I used to just leave it on like 24-seven, but, that doesn't really work, because the power went off, and now I can't turn it on. > I opened the computer, and I see the wire that goes to the button that I could push to reboot the computer, running to the mother board. then, I found the wire that runs to the power button. > Its a little tiney rectangular plug. It looks like it will fit over two pins, well, I know it will. There is a little formation of pins in a square shape rite above where the reboot chord is plugged in. > Is that where that should go? > If so, how should it plug in? > If not, where should I plug it in? > Thanks, > ~~TheCreator~~ > website: > http://tysplace.shaned.net > msn: > compgeek134@hotmail.com > aim: > st8amnd2005 > skype: > st8amnd127 > moo coder/wizard and administrator > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- I once witnessed a long-winded, month-long flamewar over the use of mice vs. trackballs... It was very silly. -- Matt Welsh ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Alex Snow @ ` Tyler Littlefield ` Lorenzo Taylor ` Gregory Nowak ` Tyler Littlefield 2 siblings, 1 reply; 14+ messages in thread From: Tyler Littlefield @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. The thing is, I live in a small town, There re thre computer businesses, and they all try to get as much out of you as they possibly can, I took the computer up to one guy, and he told me (this was for another probme.) that I was wasting my time, and that I should go to windows, charged me $35 for a "solution" and didn't fix a thing. The other guy doesn't buy used parts, but wants you to "give them to him" when all he does is sell them. everone just ripes you off down here. What do you mean by "take a paper clip?" Just put one end of the wire on one pin, and the other wire on the other? Wont that shock me? Thanks, ~~TheCreator~~ website: http://tysplace.shaned.net msn: compgeek134@hotmail.com aim: st8amnd2005 skype: st8amnd127 moo coder/wizard and administrator ----- Original Message ----- From: "Alex Snow" <alex_snow@gmx.net> To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca> Sent: Sunday, July 02, 2006 2:43 PM Subject: Re: hardware question, power button not working on system. > You really need sited assistence to do that. Every motherboard is > different as far as the connecters go and you might fry something if > you plug it in wrong. One way I found to tell what pins the power > switch is (I don't recomend this unless you know what you're doing) is > to take a paperclip or other small piece of metal and use it to > connect pairs of pins in the connecter until the machine powers on. > On > Sun, Jul 02, 2006 at 02:26:10PM -0600, Tyler Littlefield wrote: > > hello list, > > I have a problem. > > The power button on my linux system doesn't work. > > I used to just leave it on like 24-seven, but, that doesn't really work, because the power went off, and now I can't turn it on. > > I opened the computer, and I see the wire that goes to the button that I could push to reboot the computer, running to the mother board. then, I found the wire that runs to the power button. > > Its a little tiney rectangular plug. It looks like it will fit over two pins, well, I know it will. There is a little formation of pins in a square shape rite above where the reboot chord is plugged in. > > Is that where that should go? > > If so, how should it plug in? > > If not, where should I plug it in? > > Thanks, > > ~~TheCreator~~ > > website: > > http://tysplace.shaned.net > > msn: > > compgeek134@hotmail.com > > aim: > > st8amnd2005 > > skype: > > st8amnd127 > > moo coder/wizard and administrator > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > I once witnessed a long-winded, month-long flamewar over the use of > mice vs. trackballs... It was very silly. > -- Matt Welsh > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Tyler Littlefield @ ` Lorenzo Taylor 0 siblings, 0 replies; 14+ messages in thread From: Lorenzo Taylor @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 If you are uncomfortable with a paperclip, a jumper should do the same job. A jumper is the small square plastic thing like what you have on the back of your hard drive or CD-ROM drive. If you happen to have a spare, you can use that. If not, just remember where you got it from on the back of your drive and put it back in the same place when you know if your computer is able to power on. As for frying something, all the pins in that area take low power and control lights and switches. If your computer isn't powered up when you connect a paperclip or a jumper to the pins you won't fry anything. But if you hit the right pins, be prepared to startle yourself a little by the thing just coming on. <smile> HTH, Lorenzo - -- Q: What's the difference between a dead dog in the road and a dead lawyer in the road? A: There are skid marks in front of the dog. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFEqKiPG9IpekrhBfIRAvAJAKCTG0KgTGrXh4lFXWWU9CgrVIknRACgtVlO HW7anyWBDsB9fiohs41zRfI= =C65i -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Alex Snow ` Tyler Littlefield @ ` Gregory Nowak ` Tyler Littlefield ` Tyler Littlefield 2 siblings, 1 reply; 14+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Either that, or a jumper might work as well I suppose. Alex is right, you really should get sighted assistance here, instead of experimenting. Avoid going to computer shops. As you've already found out, they charge a good fee for small stuff, and they've got a right to, or if they're a bunch of idiots, they'll blame the problem on you, or on the fact that you're running an OS which they're not familiar with. A family member should be able to tell you how to plug it in by looking at the board. Just be patient, explain to them exactly what they need to do, tell them about discharging themselves properly before touching anything in the system, and they should be able to help you without much of a problem, even if it seems like they're not the right people to ask, because of their lack of knowledge. I'm speaking from experience here in wiring a few motherboards to the system, and setting jumpers on cards. As for your other question, you very well may get shocked when trying the paper clip method, however, the most it will be is 12V DC, which you'll hardly feel, if you will at all. Most likely, it will be less then that, I'm not exactly sure what voltage the board uses on the system block connectors. Greg On Sun, Jul 02, 2006 at 04:43:54PM -0400, Alex Snow wrote: > You really need sited assistance to do that. Every motherboard is > different as far as the connecters go and you might fry something if > you plug it in wrong. One way I found to tell what pins the power > switch is (I don't recommend this unless you know what you're doing) is > to take a paperclip or other small piece of metal and use it to > connect pairs of pins in the connecter until the machine powers on. - -- web site: http://www.romuald.net.eu.org gpg public key: http://www.romuald.net.eu.org/pubkey.asc skype: gregn1 (authorization required, add me to your contacts list first) - -- Free domains: http://www.eu.org/ or mail dns-manager@EU.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFEqE707s9z/XlyUyARAj7cAKDDvaSeeWczK89MdfRUy/lmVRtAhgCeLbem V7jtABXuPRc8RBp/a03PBuo= =99c8 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Gregory Nowak @ ` Tyler Littlefield ` Alex Snow 0 siblings, 1 reply; 14+ messages in thread From: Tyler Littlefield @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. I'll try the paper clip thing. My family will try, but... they usually don't well, they don't know where to plug it in at. ~~TheCreator~~ website: http://tysplace.shaned.net msn: compgeek134@hotmail.com aim: st8amnd2005 skype: st8amnd127 moo coder/wizard and administrator ----- Original Message ----- From: "Gregory Nowak" <greg@romuald.net.eu.org> To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca> Sent: Sunday, July 02, 2006 4:55 PM Subject: Re: hardware question, power button not working on system. > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Either that, or a jumper might work as well I suppose. Alex is right, > you really should get sighted assistance here, instead of > experimenting. Avoid going to computer shops. As you've already found > out, they charge a good fee for small stuff, and they've got a right > to, or if they're a bunch of idiots, they'll blame the problem on you, > or on the fact that you're running an OS which they're not familiar > with. > > A family member should be able to tell you how to plug it in by > looking at the board. Just be patient, explain to them exactly what > they need to do, tell them about discharging themselves properly > before touching anything in the system, and they should be able to > help you without much of a problem, even if it seems like they're not > the right people to ask, because of their lack of knowledge. I'm > speaking from experience here in wiring a few motherboards to the > system, and setting jumpers on cards. > > As for your other question, you very well may get shocked when trying > the paper clip method, however, the most it will be is 12V DC, which > you'll hardly feel, if you will at all. Most likely, it will be less > then that, I'm not exactly sure what voltage the board uses on the > system block connectors. > > Greg > > > On Sun, Jul 02, 2006 at 04:43:54PM -0400, Alex Snow wrote: > > You really need sited assistance to do that. Every motherboard is > > different as far as the connecters go and you might fry something if > > you plug it in wrong. One way I found to tell what pins the power > > switch is (I don't recommend this unless you know what you're doing) is > > to take a paperclip or other small piece of metal and use it to > > connect pairs of pins in the connecter until the machine powers on. > > - -- > web site: http://www.romuald.net.eu.org > gpg public key: http://www.romuald.net.eu.org/pubkey.asc > skype: gregn1 > (authorization required, add me to your contacts list first) > > - -- > Free domains: http://www.eu.org/ or mail dns-manager@EU.org > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.3 (GNU/Linux) > > iD8DBQFEqE707s9z/XlyUyARAj7cAKDDvaSeeWczK89MdfRUy/lmVRtAhgCeLbem > V7jtABXuPRc8RBp/a03PBuo= > =99c8 > -----END PGP SIGNATURE----- > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Tyler Littlefield @ ` Alex Snow 0 siblings, 0 replies; 14+ messages in thread From: Alex Snow @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. the function of each connecter on the motherboard is usually silkscreened on the board itself near the pins the label corisponds to. On Sun, Jul 02, 2006 at 05:29:54PM -0600, Tyler Littlefield wrote: > I'll try the paper clip thing. My family will try, but... they usually don't > well, they don't know where to plug it in at. > > ~~TheCreator~~ > website: > http://tysplace.shaned.net > msn: > compgeek134@hotmail.com > aim: > st8amnd2005 > skype: > st8amnd127 > moo coder/wizard and administrator > > ----- Original Message ----- > From: "Gregory Nowak" <greg@romuald.net.eu.org> > To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca> > Sent: Sunday, July 02, 2006 4:55 PM > Subject: Re: hardware question, power button not working on system. > > > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > Either that, or a jumper might work as well I suppose. Alex is right, > > you really should get sighted assistance here, instead of > > experimenting. Avoid going to computer shops. As you've already found > > out, they charge a good fee for small stuff, and they've got a right > > to, or if they're a bunch of idiots, they'll blame the problem on you, > > or on the fact that you're running an OS which they're not familiar > > with. > > > > A family member should be able to tell you how to plug it in by > > looking at the board. Just be patient, explain to them exactly what > > they need to do, tell them about discharging themselves properly > > before touching anything in the system, and they should be able to > > help you without much of a problem, even if it seems like they're not > > the right people to ask, because of their lack of knowledge. I'm > > speaking from experience here in wiring a few motherboards to the > > system, and setting jumpers on cards. > > > > As for your other question, you very well may get shocked when trying > > the paper clip method, however, the most it will be is 12V DC, which > > you'll hardly feel, if you will at all. Most likely, it will be less > > then that, I'm not exactly sure what voltage the board uses on the > > system block connectors. > > > > Greg > > > > > > On Sun, Jul 02, 2006 at 04:43:54PM -0400, Alex Snow wrote: > > > You really need sited assistance to do that. Every motherboard is > > > different as far as the connecters go and you might fry something if > > > you plug it in wrong. One way I found to tell what pins the power > > > switch is (I don't recommend this unless you know what you're doing) is > > > to take a paperclip or other small piece of metal and use it to > > > connect pairs of pins in the connecter until the machine powers on. > > > > - -- > > web site: http://www.romuald.net.eu.org > > gpg public key: http://www.romuald.net.eu.org/pubkey.asc > > skype: gregn1 > > (authorization required, add me to your contacts list first) > > > > - -- > > Free domains: http://www.eu.org/ or mail dns-manager@EU.org > > -----BEGIN PGP SIGNATURE----- > > Version: GnuPG v1.4.3 (GNU/Linux) > > > > iD8DBQFEqE707s9z/XlyUyARAj7cAKDDvaSeeWczK89MdfRUy/lmVRtAhgCeLbem > > V7jtABXuPRc8RBp/a03PBuo= > > =99c8 > > -----END PGP SIGNATURE----- > > > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- I did this 'cause Linux gives me a woody. It doesn't generate revenue. -- Dave '-ddt->` Taylor, announcing DOOM for Linux ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Alex Snow ` Tyler Littlefield ` Gregory Nowak @ ` Tyler Littlefield ` Butch Bussen 2 siblings, 1 reply; 14+ messages in thread From: Tyler Littlefield @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. Hello, I tried the sighted thing, They don't see anything written next to any pins. Is tehre something else I can do? Thanks, ~~TheCreator~~ website: http://tysplace.shaned.net msn: compgeek134@hotmail.com aim: st8amnd2005 skype: st8amnd127 moo coder/wizard and administrator ----- Original Message ----- From: "Alex Snow" <alex_snow@gmx.net> To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca> Sent: Sunday, July 02, 2006 2:43 PM Subject: Re: hardware question, power button not working on system. > You really need sited assistence to do that. Every motherboard is > different as far as the connecters go and you might fry something if > you plug it in wrong. One way I found to tell what pins the power > switch is (I don't recomend this unless you know what you're doing) is > to take a paperclip or other small piece of metal and use it to > connect pairs of pins in the connecter until the machine powers on. > On > Sun, Jul 02, 2006 at 02:26:10PM -0600, Tyler Littlefield wrote: > > hello list, > > I have a problem. > > The power button on my linux system doesn't work. > > I used to just leave it on like 24-seven, but, that doesn't really work, because the power went off, and now I can't turn it on. > > I opened the computer, and I see the wire that goes to the button that I could push to reboot the computer, running to the mother board. then, I found the wire that runs to the power button. > > Its a little tiney rectangular plug. It looks like it will fit over two pins, well, I know it will. There is a little formation of pins in a square shape rite above where the reboot chord is plugged in. > > Is that where that should go? > > If so, how should it plug in? > > If not, where should I plug it in? > > Thanks, > > ~~TheCreator~~ > > website: > > http://tysplace.shaned.net > > msn: > > compgeek134@hotmail.com > > aim: > > st8amnd2005 > > skype: > > st8amnd127 > > moo coder/wizard and administrator > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > I once witnessed a long-winded, month-long flamewar over the use of > mice vs. trackballs... It was very silly. > -- Matt Welsh > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Tyler Littlefield @ ` Butch Bussen 0 siblings, 0 replies; 14+ messages in thread From: Butch Bussen @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. I missed out on the first part of this thrread. Write me privately and I'll see if I can help. I gather the machine won't power up at all? Anyhow, I use to build systems, so if you want to drop me a note, we'll see what we can do. 73s Butch Bussen wa0vjr ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. hardware question, power button not working on system Tyler Littlefield ` Alex Snow @ ` Gabriel Vega ` Sina Bahram ` (3 more replies) 1 sibling, 4 replies; 14+ messages in thread From: Gabriel Vega @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. was this plugged in to a real power serge protector aor just a power bar of outlets. there's a chance your machine is gone do to a serge. I just lost a p3 866 due to this issue. I had it plugged in to power bar, which I was asured that could handle serges by a store person and now my p3 866 is a gon er. On Jul 2, 2006, at 1:26 PM, Tyler Littlefield wrote: > hello list, > I have a problem. > The power button on my linux system doesn't work. > I used to just leave it on like 24-seven, but, that doesn't really > work, because the power went off, and now I can't turn it on. > I opened the computer, and I see the wire that goes to the button > that I could push to reboot the computer, running to the mother > board. then, I found the wire that runs to the power button. > Its a little tiney rectangular plug. It looks like it will fit over > two pins, well, I know it will. There is a little formation of pins > in a square shape rite above where the reboot chord is plugged in. > Is that where that should go? > If so, how should it plug in? > If not, where should I plug it in? > Thanks, > ~~TheCreator~~ > website: > http://tysplace.shaned.net > msn: > compgeek134@hotmail.com > aim: > st8amnd2005 > skype: > st8amnd127 > moo coder/wizard and administrator > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: hardware question, power button not working on system. ` Gabriel Vega @ ` Sina Bahram ` Alex Snow ` (2 subsequent siblings) 3 siblings, 0 replies; 14+ messages in thread From: Sina Bahram @ UTC (permalink / raw) To: 'Speakup is a screen review system for Linux.' Those things usually have 100,000 dollar warrantees on them, so you might want to look into that. Although I'm afraid it might only be for direct value and not potential value. Take care, Sina -----Original Message----- From: speakup-bounces@braille.uwo.ca [mailto:speakup-bounces@braille.uwo.ca] On Behalf Of Gabriel Vega Sent: Sunday, July 02, 2006 5:58 PM To: Speakup is a screen review system for Linux. Subject: Re: hardware question, power button not working on system. was this plugged in to a real power serge protector aor just a power bar of outlets. there's a chance your machine is gone do to a serge. I just lost a p3 866 due to this issue. I had it plugged in to power bar, which I was asured that could handle serges by a store person and now my p3 866 is a gon er. On Jul 2, 2006, at 1:26 PM, Tyler Littlefield wrote: > hello list, > I have a problem. > The power button on my linux system doesn't work. > I used to just leave it on like 24-seven, but, that doesn't really > work, because the power went off, and now I can't turn it on. > I opened the computer, and I see the wire that goes to the button that > I could push to reboot the computer, running to the mother board. > then, I found the wire that runs to the power button. > Its a little tiney rectangular plug. It looks like it will fit over > two pins, well, I know it will. There is a little formation of pins in > a square shape rite above where the reboot chord is plugged in. > Is that where that should go? > If so, how should it plug in? > If not, where should I plug it in? > Thanks, > ~~TheCreator~~ > website: > http://tysplace.shaned.net > msn: > compgeek134@hotmail.com > aim: > st8amnd2005 > skype: > st8amnd127 > moo coder/wizard and administrator > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup _______________________________________________ Speakup mailing list Speakup@braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Gabriel Vega ` Sina Bahram @ ` Alex Snow ` Tyler Littlefield ` Gregory Nowak 3 siblings, 0 replies; 14+ messages in thread From: Alex Snow @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. was this just a serge through the AC line or was it through a network/telephone line? if it's just a serge through the power then all that's dead is the power supply, which is easy to replace...or it might just be the fuse in the power supply. On Sun, Jul 02, 2006 at 02:58:03PM -0700, Gabriel Vega wrote: > was this plugged in to a real power serge protector aor just a power > bar of outlets. there's a chance your machine is gone do to a serge. > I just lost a p3 866 due to this issue. I had it plugged in to power > bar, which I was asured that could handle serges by a store person > and now my p3 866 is a gon er. > On Jul 2, 2006, at 1:26 PM, Tyler Littlefield wrote: > > > hello list, > > I have a problem. > > The power button on my linux system doesn't work. > > I used to just leave it on like 24-seven, but, that doesn't really > > work, because the power went off, and now I can't turn it on. > > I opened the computer, and I see the wire that goes to the button > > that I could push to reboot the computer, running to the mother > > board. then, I found the wire that runs to the power button. > > Its a little tiney rectangular plug. It looks like it will fit over > > two pins, well, I know it will. There is a little formation of pins > > in a square shape rite above where the reboot chord is plugged in. > > Is that where that should go? > > If so, how should it plug in? > > If not, where should I plug it in? > > Thanks, > > ~~TheCreator~~ > > website: > > http://tysplace.shaned.net > > msn: > > compgeek134@hotmail.com > > aim: > > st8amnd2005 > > skype: > > st8amnd127 > > moo coder/wizard and administrator > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Your job is being a professor and researcher: That's one hell of a good excuse for some of the brain-damages of minix. -- Linus Torvalds to Andrew Tanenbaum ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Gabriel Vega ` Sina Bahram ` Alex Snow @ ` Tyler Littlefield ` Gregory Nowak 3 siblings, 0 replies; 14+ messages in thread From: Tyler Littlefield @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. It still works, the power didn't damage anything, and it was plugged into a surge protector, all my electronic equipment is. Thx, ~~TheCreator~~ website: http://tysplace.shaned.net msn: compgeek134@hotmail.com aim: st8amnd2005 skype: st8amnd127 moo coder/wizard and administrator ----- Original Message ----- From: "Gabriel Vega" <blindtech@blindtechs.net> To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca> Sent: Sunday, July 02, 2006 3:58 PM Subject: Re: hardware question, power button not working on system. > was this plugged in to a real power serge protector aor just a power > bar of outlets. there's a chance your machine is gone do to a serge. > I just lost a p3 866 due to this issue. I had it plugged in to power > bar, which I was asured that could handle serges by a store person > and now my p3 866 is a gon er. > On Jul 2, 2006, at 1:26 PM, Tyler Littlefield wrote: > > > hello list, > > I have a problem. > > The power button on my linux system doesn't work. > > I used to just leave it on like 24-seven, but, that doesn't really > > work, because the power went off, and now I can't turn it on. > > I opened the computer, and I see the wire that goes to the button > > that I could push to reboot the computer, running to the mother > > board. then, I found the wire that runs to the power button. > > Its a little tiney rectangular plug. It looks like it will fit over > > two pins, well, I know it will. There is a little formation of pins > > in a square shape rite above where the reboot chord is plugged in. > > Is that where that should go? > > If so, how should it plug in? > > If not, where should I plug it in? > > Thanks, > > ~~TheCreator~~ > > website: > > http://tysplace.shaned.net > > msn: > > compgeek134@hotmail.com > > aim: > > st8amnd2005 > > skype: > > st8amnd127 > > moo coder/wizard and administrator > > _______________________________________________ > > Speakup mailing list > > Speakup@braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup@braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: hardware question, power button not working on system. ` Gabriel Vega ` (2 preceding siblings ...) ` Tyler Littlefield @ ` Gregory Nowak 3 siblings, 0 replies; 14+ messages in thread From: Gregory Nowak @ UTC (permalink / raw) To: Speakup is a screen review system for Linux. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 No surge protector will handle a direct lightning hit to the AC line. Also, those chips that monitor the power in the surge protector go dead sometimes, and the protector just supplies the power without monitoring it anymore, or it simply doesn't supply power at all. There should be a light on the protector that indicates if the monitoring chip is still doing its job or not, you want to have a sightling check that for you from time to time. As for the $100,000 coverage, I thought that only applied to some UPS units, not to the surge protectors that you simply get with a bar of outlets. If it was a hit to the AC line, Alex is right here too, either replacing the power supply, or the fuse in your old one, should bring your machine back to life. If you're going to open your power supply though, be careful, since there are capacitors in there, and you could get a shock. Greg On Sun, Jul 02, 2006 at 02:58:03PM -0700, Gabriel Vega wrote: > was this plugged in to a real power serge protector aor just a power > bar of outlets. there's a chance your machine is gone do to a serge. > I just lost a p3 866 due to this issue. I had it plugged in to power > bar, which I was asured that could handle serges by a store person > and now my p3 866 is a gon er. - -- web site: http://www.romuald.net.eu.org gpg public key: http://www.romuald.net.eu.org/pubkey.asc skype: gregn1 (authorization required, add me to your contacts list first) - -- Free domains: http://www.eu.org/ or mail dns-manager@EU.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFEqFFK7s9z/XlyUyARApPKAKDD58RlKM5RrsRqoFaxuMtKtnp0eQCfU3GK uQNOvpttliWPbhadQzicNWo= =Xe0m -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
hardware question, power button not working on system Tyler Littlefield
` Alex Snow
` Tyler Littlefield
` Lorenzo Taylor
` Gregory Nowak
` Tyler Littlefield
` Alex Snow
` Tyler Littlefield
` Butch Bussen
` Gabriel Vega
` Sina Bahram
` Alex Snow
` Tyler Littlefield
` Gregory Nowak
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).