Westell DSL modem config pages

["Jim Kutsch" <jimkutsch@yahoo.com>]

There have been several postings here recently about DSL modem 
configuration. In case it's helpful, below is the list of URLs that directly 
access the various configuration pages on a Westell Wirespeed 327W.  Getting 
to these from the main page at 192.168.1.1 is very speech unfriendly.  But, 
by going directly to these addresses, all of the options can be configured. 
Initiating new DSL service (at least with Verizon) can be accomplished 
completely through these addresses and an external web account setup page, 
all without installing any software on home PCs.

Also, the Westell can be placed in bridge mode and connected to a Linksys 
running OpenWRT.  The required PPPoE service runs in the Linksys and 
everything in the home network can then be configured via command line 
interface to the Linux OpenWRT firmware in the router.

Westell may use these same addresses on other DSL boxes besides the 327W .

Jim Kutsch
Morristown, NJ


Westell Wirespeed 327W configuration pages:
http://192.168.1.1/singleStaticIP.htm
http://192.168.1.1/ethwancfg.htm
http://192.168.1.1/nat.htm
http://192.168.1.1/fwMain.htm
http://192.168.1.1/802_11_cfg.htm
http://192.168.1.1/dns.htm
http://192.168.1.1/dhcp.htm?dhcpOpt=1
http://192.168.1.1/privLan.htm?dhcpOpt=1
http://192.168.1.1/pubLan.htm?dhcpOpt=1
http://192.168.1.1/cos.htm
http://192.168.1.1/atmlp.htm
http://192.168.1.1/autodisc.htm
http://192.168.1.1/qos.htm?qosQIndex=0&qosLIndex=0&qosIpFragSizeCur=244
http://192.168.1.1/route.htm
http://192.168.1.1/rip.htm?EnableRIPCur=0&ripAuthModeCur=1&ripRcvTypeCur=2&ripXmtTypeCur=3