* Newbie questions
@ Tim Burgess
` William F. Acker WB2FLW +1-303-777-8123
0 siblings, 1 reply; 4+ messages in thread
From: Tim Burgess @ UTC (permalink / raw)
To: Speakup (E-mail)
Hi,
I've just got a Red Hat 7.3 system going on a Sony VAIO laptop using SpeakUp
and a DecTalk Express. I've got some, inevitable, questions:
1 - I ran sndconfig and my sound card was recognised and played the sample
sound - do I need to install alsa as well? If so, why so?
2 - I have an internal modem and I've downloaded Linux drivers for it, but
these require the kernel sources and a recompile. I've installed the kernel
source package from the SpeakUp modified Red Hat site (since this is the
kernel I've currently got installed - 2.4.18-10spk), but I'm now floundering
as I expected to find a /usr/src/linux-2.4.18-10spk directory and there
isn't one. What I do have is a linux-2.4.18-3 (created from my original Red
Hat media before I installed the modified 2.4.18-10spk) and a directory
called redhat. I know I can delete the linux-2.4.18-3 directory but where
do I find my new source tree? There's lots of stuff that might suit in the
redhat directory, but it's been a long, long time since I recompiled a
kernel and I don't want to blow it now, so can somebody offer me some
pointers?
3 - My machine identifies itself as "localhost" and I'd like to change
this - I've tried using the hostname command, but the setting doesn't seem
to get preserved. My machine has a fixed IP address and participates in my
ethernet LAN.
4 - Once I get my modem up and running, how do I configure Internet access?
The Red Hat Getting Started Guide only refers to graphics mode
configuration?
Many thanks in advance to anybody willing to help. Thanks anyway to Janina
for getting me this far - she knows what a battle it's been!
Tim
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Newbie questions
Newbie questions Tim Burgess
@ ` William F. Acker WB2FLW +1-303-777-8123
` Tim Burgess
` Tim Burgess
0 siblings, 2 replies; 4+ messages in thread
From: William F. Acker WB2FLW +1-303-777-8123 @ UTC (permalink / raw)
To: Speakup (E-mail)
Hi, Tim,
The kernel source package that you need to install is
kernel-source-2.4.18-10spk.i386.rpm, not kernel-2.4.18-10spk.src.rpm. The
best way to remove the old source tree, is to type: "rpm -e
kernel-source". The good news is that you almost certainly don't have to
recompile the kernel. You do need the kernel source in order to compile
the MODEM drivers. To make the change to your host name stick, edit
/etc/sysconfig/network. There'll be a line that says:
HOSTNAME=localhost.localdomain
Just edit it to taste.
HTH.
--
Bill in Denver
On Thu, 19 Sep 2002, Tim Burgess wrote:
> Hi,
>
> I've just got a Red Hat 7.3 system going on a Sony VAIO laptop using SpeakUp
> and a DecTalk Express. I've got some, inevitable, questions:
>
> 1 - I ran sndconfig and my sound card was recognised and played the sample
> sound - do I need to install alsa as well? If so, why so?
>
> 2 - I have an internal modem and I've downloaded Linux drivers for it, but
> these require the kernel sources and a recompile. I've installed the kernel
> source package from the SpeakUp modified Red Hat site (since this is the
> kernel I've currently got installed - 2.4.18-10spk), but I'm now floundering
> as I expected to find a /usr/src/linux-2.4.18-10spk directory and there
> isn't one. What I do have is a linux-2.4.18-3 (created from my original Red
> Hat media before I installed the modified 2.4.18-10spk) and a directory
> called redhat. I know I can delete the linux-2.4.18-3 directory but where
> do I find my new source tree? There's lots of stuff that might suit in the
> redhat directory, but it's been a long, long time since I recompiled a
> kernel and I don't want to blow it now, so can somebody offer me some
> pointers?
>
> 3 - My machine identifies itself as "localhost" and I'd like to change
> this - I've tried using the hostname command, but the setting doesn't seem
> to get preserved. My machine has a fixed IP address and participates in my
> ethernet LAN.
>
> 4 - Once I get my modem up and running, how do I configure Internet access?
> The Red Hat Getting Started Guide only refers to graphics mode
> configuration?
>
> Many thanks in advance to anybody willing to help. Thanks anyway to Janina
> for getting me this far - she knows what a battle it's been!
>
> Tim
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: Newbie questions
` William F. Acker WB2FLW +1-303-777-8123
@ ` Tim Burgess
` Tim Burgess
1 sibling, 0 replies; 4+ messages in thread
From: Tim Burgess @ UTC (permalink / raw)
To: speakup
Hi Bill,
I gave the wrong name for the source RPM that I got - it was
kernel-2.4.18-10spk.src.rpm. I'll certainly remove the old 2.4.18-3 RPM to
save some space. Do I copy the appropriate i686 tree from /usr/src/redhat
to /usr/src?
Still confused... Sorry.
Tim
-----Original Message-----
From: speakup-admin@braille.uwo.ca
[mailto:speakup-admin@braille.uwo.ca]On Behalf Of William F. Acker
WB2FLW +1-303-777-8123
Sent: 19 September 2002 17:27
To: Speakup (E-mail)
Subject: Re: Newbie questions
Hi, Tim,
The kernel source package that you need to install is
kernel-source-2.4.18-10spk.i386.rpm, not kernel-2.4.18-10spk.src.rpm. The
best way to remove the old source tree, is to type: "rpm -e
kernel-source". The good news is that you almost certainly don't have to
recompile the kernel. You do need the kernel source in order to compile
the MODEM drivers. To make the change to your host name stick, edit
/etc/sysconfig/network. There'll be a line that says:
HOSTNAME=localhost.localdomain
Just edit it to taste.
HTH.
--
Bill in Denver
On Thu, 19 Sep 2002, Tim Burgess wrote:
> Hi,
>
> I've just got a Red Hat 7.3 system going on a Sony VAIO laptop using
SpeakUp
> and a DecTalk Express. I've got some, inevitable, questions:
>
> 1 - I ran sndconfig and my sound card was recognised and played the sample
> sound - do I need to install alsa as well? If so, why so?
>
> 2 - I have an internal modem and I've downloaded Linux drivers for it, but
> these require the kernel sources and a recompile. I've installed the
kernel
> source package from the SpeakUp modified Red Hat site (since this is the
> kernel I've currently got installed - 2.4.18-10spk), but I'm now
floundering
> as I expected to find a /usr/src/linux-2.4.18-10spk directory and there
> isn't one. What I do have is a linux-2.4.18-3 (created from my original
Red
> Hat media before I installed the modified 2.4.18-10spk) and a directory
> called redhat. I know I can delete the linux-2.4.18-3 directory but where
> do I find my new source tree? There's lots of stuff that might suit in
the
> redhat directory, but it's been a long, long time since I recompiled a
> kernel and I don't want to blow it now, so can somebody offer me some
> pointers?
>
> 3 - My machine identifies itself as "localhost" and I'd like to change
> this - I've tried using the hostname command, but the setting doesn't seem
> to get preserved. My machine has a fixed IP address and participates in
my
> ethernet LAN.
>
> 4 - Once I get my modem up and running, how do I configure Internet
access?
> The Red Hat Getting Started Guide only refers to graphics mode
> configuration?
>
> Many thanks in advance to anybody willing to help. Thanks anyway to
Janina
> for getting me this far - she knows what a battle it's been!
>
> Tim
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: Newbie questions
` William F. Acker WB2FLW +1-303-777-8123
` Tim Burgess
@ ` Tim Burgess
1 sibling, 0 replies; 4+ messages in thread
From: Tim Burgess @ UTC (permalink / raw)
To: speakup
Hi Bill,
I've now successfully configured my host and domain names using your
method - many thanks.
Tim
-----Original Message-----
From: speakup-admin@braille.uwo.ca
[mailto:speakup-admin@braille.uwo.ca]On Behalf Of William F. Acker
WB2FLW +1-303-777-8123
Sent: 19 September 2002 17:27
To: Speakup (E-mail)
Subject: Re: Newbie questions
Hi, Tim,
The kernel source package that you need to install is
kernel-source-2.4.18-10spk.i386.rpm, not kernel-2.4.18-10spk.src.rpm. The
best way to remove the old source tree, is to type: "rpm -e
kernel-source". The good news is that you almost certainly don't have to
recompile the kernel. You do need the kernel source in order to compile
the MODEM drivers. To make the change to your host name stick, edit
/etc/sysconfig/network. There'll be a line that says:
HOSTNAME=localhost.localdomain
Just edit it to taste.
HTH.
--
Bill in Denver
On Thu, 19 Sep 2002, Tim Burgess wrote:
> Hi,
>
> I've just got a Red Hat 7.3 system going on a Sony VAIO laptop using
SpeakUp
> and a DecTalk Express. I've got some, inevitable, questions:
>
> 1 - I ran sndconfig and my sound card was recognised and played the sample
> sound - do I need to install alsa as well? If so, why so?
>
> 2 - I have an internal modem and I've downloaded Linux drivers for it, but
> these require the kernel sources and a recompile. I've installed the
kernel
> source package from the SpeakUp modified Red Hat site (since this is the
> kernel I've currently got installed - 2.4.18-10spk), but I'm now
floundering
> as I expected to find a /usr/src/linux-2.4.18-10spk directory and there
> isn't one. What I do have is a linux-2.4.18-3 (created from my original
Red
> Hat media before I installed the modified 2.4.18-10spk) and a directory
> called redhat. I know I can delete the linux-2.4.18-3 directory but where
> do I find my new source tree? There's lots of stuff that might suit in
the
> redhat directory, but it's been a long, long time since I recompiled a
> kernel and I don't want to blow it now, so can somebody offer me some
> pointers?
>
> 3 - My machine identifies itself as "localhost" and I'd like to change
> this - I've tried using the hostname command, but the setting doesn't seem
> to get preserved. My machine has a fixed IP address and participates in
my
> ethernet LAN.
>
> 4 - Once I get my modem up and running, how do I configure Internet
access?
> The Red Hat Getting Started Guide only refers to graphics mode
> configuration?
>
> Many thanks in advance to anybody willing to help. Thanks anyway to
Janina
> for getting me this far - she knows what a battle it's been!
>
> Tim
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Newbie questions Tim Burgess
` William F. Acker WB2FLW +1-303-777-8123
` Tim Burgess
` Tim Burgess
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).