* More and more puzzled
@ jaffar
` Glenn at home
0 siblings, 1 reply; 3+ messages in thread
From: jaffar @ UTC (permalink / raw)
To: Speakup is a screen review system for Linux.
[-- Attachment #1: Type: text/plain, Size: 717 bytes --]
Hi Friends. I have downloaded and installed the latest firmware and software drivers for my dectalk express. Dectalk express is working fine with windows. It is capable now of speaking, both window eyes and jaws. the dectalk express demo seems to work when brought up at the command prompt. It is connected to com port 1, or ser0 in linux language. However, Speakup still can't talk to it. I am hopelessly puzzled at this point. I do not believe that there is a flaw in the bios setting because the com port wouldn't work otherwise. I tried installing both Fc3 and slackware as a trial, and i get no speech at all from both. If someone can help me pinpoint this problem, i'll be extremely grateful. Cheers!
[-- Attachment #2: "AVG certification" --]
[-- Type: text/plain, Size: 140 bytes --]
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 5/6/2005
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: More and more puzzled
More and more puzzled jaffar
@ ` Glenn at home
` Glenn at home
0 siblings, 1 reply; 3+ messages in thread
From: Glenn at home @ UTC (permalink / raw)
To: jaffar, Speakup is a screen review system for Linux.
Did you try both dectalk command-line terms?
speakup_synth=dectlk
speakup_synth=dtalk
I am not sure about the wording for the 2 synths as it's been a while since
I have had to type any of them in, but one is for one type of DecTalk and
one is for the other type, i.e., external, and express.
Glenn
----- Original Message -----
From: <jaffar@jeffstudio.net>
To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Friday, May 06, 2005 9:35 PM
Subject: More and more puzzled
Hi Friends. I have downloaded and installed the latest firmware and
software drivers for my dectalk express. Dectalk express is working fine
with windows. It is capable now of speaking, both window eyes and jaws.
the dectalk express demo seems to work when brought up at the command
prompt. It is connected to com port 1, or ser0 in linux language. However,
Speakup still can't talk to it. I am hopelessly puzzled at this point. I
do not believe that there is a flaw in the bios setting because the com port
wouldn't work otherwise. I tried installing both Fc3 and slackware as a
trial, and i get no speech at all from both. If someone can help me
pinpoint this problem, i'll be extremely grateful. Cheers!
--------------------------------------------------------------------------------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 5/6/2005
--------------------------------------------------------------------------------
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: More and more puzzled
` Glenn at home
@ ` Glenn at home
0 siblings, 0 replies; 3+ messages in thread
From: Glenn at home @ UTC (permalink / raw)
To: Glenn at home, Speakup is a screen review system for Linux.
Here are the 2 possible synth names:
DEC Talk Express
DECTLK
DEC Talk External
DECEXT
Glenn
----- Original Message -----
From: "Glenn at home" <GlennErvin@cableone.net>
To: <jaffar@jeffstudio.net>; "Speakup is a screen review system for Linux."
<speakup@braille.uwo.ca>
Sent: Friday, May 06, 2005 9:43 PM
Subject: Re: More and more puzzled
Did you try both dectalk command-line terms?
speakup_synth=dectlk
speakup_synth=dtalk
I am not sure about the wording for the 2 synths as it's been a while since
I have had to type any of them in, but one is for one type of DecTalk and
one is for the other type, i.e., external, and express.
Glenn
----- Original Message -----
From: <jaffar@jeffstudio.net>
To: "Speakup is a screen review system for Linux." <speakup@braille.uwo.ca>
Sent: Friday, May 06, 2005 9:35 PM
Subject: More and more puzzled
Hi Friends. I have downloaded and installed the latest firmware and
software drivers for my dectalk express. Dectalk express is working fine
with windows. It is capable now of speaking, both window eyes and jaws.
the dectalk express demo seems to work when brought up at the command
prompt. It is connected to com port 1, or ser0 in linux language. However,
Speakup still can't talk to it. I am hopelessly puzzled at this point. I
do not believe that there is a flaw in the bios setting because the com port
wouldn't work otherwise. I tried installing both Fc3 and slackware as a
trial, and i get no speech at all from both. If someone can help me
pinpoint this problem, i'll be extremely grateful. Cheers!
--------------------------------------------------------------------------------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 5/6/2005
--------------------------------------------------------------------------------
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
More and more puzzled jaffar
` Glenn at home
` Glenn at home
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).