From: "Rob Hudson" <captinlogic@gmail.com>
To: "Speakup is a screen review system for Linux."
<speakup@linux-speakup.org>
Subject: Re: restoring alsa defaults
Date: Mon, 10 Jun 2013 23:10:09 -0500 [thread overview]
Message-ID: <79024B1836A34620A4D830B7537C2648@userb0b9f3e10f> (raw)
In-Reply-To: <20130611035804.GA9460@jdc.jasonjgw.net>
[-- Attachment #1: Type: text/plain, Size: 1874 bytes --]
This is my aplay -l output:
**** List of PLAYBACK Hardware Devices ****
card 0: IXP [ATI IXP], device 0: ATI IXP AC97 [ATI IXP AC97]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: IXP [ATI IXP], device 1: ATI IXP IEC958 [ATI IXP IEC958 (AC97)]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Device [Generic USB Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
I attached my amixer output. It is pretty long. I used the following
command:
amixer -c 0 > mix.txt
Not sure if the attachment made it through.
----- Original Message -----
From: "Jason White" <jason@jasonjgw.net>
To: <speakup@linux-speakup.org>
Sent: Monday, June 10, 2013 10:58 PM
Subject: Re: restoring alsa defaults
> Tony Baechler <tony@baechler.net> wrote:
>> Look at your alsa.conf. You might have to comment out the old card and
>> make sure the new card is the first one selected.
>
> In my configuration, at least, there are options in
> /etc/modprobe.d/alsa-base.conf that prevent USB sound cards from being
> recognized as card 0. Given that you're dealing with the on-board sound
> device, this shouldn't be an issue though in the present case.
>
>> Also, you didn't say
>> what chipset you have, but you might need non-free firmware. On Debian,
>> that requires adding the package with your firmware module and making
>> sure
>> it's loaded by the kernel. With USB sound, for example, the default is
>> to
>> always have it listed as the second card and never use it as the primary
>> sound device.
>
> Starting from the basics would help, too: see if aplay -l lists the card
> (it
> should be listed as card 0 if it's the only one). After that, move on to
> amixer settings.
>
> _______________________________________________
> Speakup mailing list
> Speakup@linux-speakup.org
> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
[-- Attachment #2: mix.txt --]
[-- Type: text/plain, Size: 5432 bytes --]
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 51 [81%] [-18.00dB] [on]
Front Right: Playback 51 [81%] [-18.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 63 [100%] [0.00dB] [on]
Front Right: Playback 63 [100%] [0.00dB] [on]
Simple mixer control 'Surround Jack Mode',0
Capabilities: enum
Items: 'Shared' 'Independent'
Item0: 'Shared'
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 63
Mono: Playback 63 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 63
Mono: Playback 51 [81%] [-18.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 25 [81%] [3.00dB] [on] Capture [off]
Front Right: Playback 25 [81%] [3.00dB] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Select',0
Capabilities: enum
Items: 'Mic1' 'Mic2'
Item0: 'Mic1'
Simple mixer control 'Video',0
Capabilities: cswitch cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Mono
Capture channels: Mono
Mono: Playback [off] Capture [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'PCM' 'Analog1 In' 'Analog2 In' 'IEC958 In'
Item0: 'PCM'
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [-45.00dB] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 8 [53%] [12.00dB] [on]
Front Right: Capture 8 [53%] [12.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch' '4ch' '6ch'
Item0: '2ch'
Simple mixer control 'Duplicate Front',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
prev parent reply other threads:[~ UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
Rob Hudson
` Jason White
` Tony Baechler
` Jason White
` Rob Hudson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79024B1836A34620A4D830B7537C2648@userb0b9f3e10f \
--to=captinlogic@gmail.com \
--cc=speakup@linux-speakup.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).