public inbox for speakup@linux-speakup.org
 help / color / mirror / Atom feed
From: "Thomas Ward" <tward@bright.net>
To: <speakup@braille.uwo.ca>
Subject: Re: cp
Date: Mon, 11 Mar 2002 10:14:03 -0500	[thread overview]
Message-ID: <00cc01c1c90f$61c557e0$0100a8c0@tward> (raw)
In-Reply-To: <006e01c1c80a$055a0ba0$9d2efea9@computer>

Well, use a cp -R, and it should grab about everything.
 If not I know how to make Windows 98 autoinstall if you have a 98 retail
version.
The best way to copy Windows to another drive is to load Windows go to the
ms dos prompt and type.

xcopy32 /c /e /r /k


----- Original Message -----
From: Pete <persuric@ameritech.net>
To: <speakup@braille.uwo.ca>
Sent: Sunday, March 10, 2002 3:03 AM
Subject: cp


>
>   I have a new drive, I want to cp my windows instalation to it so I don't
> have to get some one to read the setup screens to me to re setup windows.
> Will cp or mv move the whole contense of my fat32 windows C:\> to another
> drive including hidden/system/readonly/longfilenames/anything I forgot?
>   Pete
>
>   P.S.
>   I would rather use the cp command rather than the mv command.
>
> ----- Original Message -----
> From: "Gregory Nowak" <gnowak1@uic.edu>
> To: <speakup@braille.uwo.ca>
> Sent: Saturday, March 09, 2002 2:39 PM
> Subject: Re: trplayer and realplayer
>
>
> I do: "cp -a " /cdrom/mydir/ /tmp/otherdir/ and it recurses and works just
> fine.
> Greg
>
>
> On Sat, Mar 09, 2002 at 01:05:44PM -0500, Charles Hallenbeck wrote:
> > Igor -
> >
> > That would have worked fine if your source was not on a CD. The
> > thing is, the MV command wants to erase the source after putting
> > it somewhere else, and your CD is not erasable. You might want to
> > use "cp" instead with a flag to make it recursive. Probably the
> > flag would be -r but I would check first.
> >
> > Chuck
> >
> > On Sat, 9 Mar 2002, Igor Gueths wrote:
> >
> > > Hi Chuck. How do you mv it so that the directory doesn't get omitted?
As
> an example, I was trying to move an entire directory tree from Cd to hard
> disk (/usr/src). My syntax was something like this: mv
> /mnt/debian/dists/potato/main/disks-i386/source /usr/src. This should work
> under Dos, but doesn't seem to work under Linux. Just to make sure, I
added
> a *.* before the /usr/src. In both cases, I get a message like: mv:
> directory has been omitted. And it doesn't move anything. In this example,
> I'm not saying that I am trying to do this, although I did try it before.
> Basically, what would be the syntax to move a directory tree? Let's say I
> created a tempdir for a tar archive and untarred it. And it created a dir
in
> /temp, therefore the tree would be /temp/package. Let's say I want to move
> /package to /usr/local. Also, package has subdirs that I want to have
moved
> as well. What would be the syntax to move package to /usr/local and all
> subdirs?
> > > ----- Original Message -----
> > > From: Charles Hallenbeck <hallenbeck@valstar.net>
> > > To: <speakup@braille.uwo.ca>
> > > Sent: Saturday, March 09, 2002 9:47 AM
> > > Subject: Re: trplayer and realplayer
> > >
> > >
> > > > Hi Igor -
> > > >
> > > > I have had that problem too. On my Slackware system the "less"
> > > > command is installed in such a way that it automatically shows
> > > > the files contained in a tar archive. The first file listed will
> > > > be a directory if the  archive will be one that creates its own
> > > > directory.
> > > >
> > > > If your "less" will not do that, you can always create a
> > > > temporary directory and untar the thing in there. If it does
> > > > create its own directory under your temporary one, you can just
> > > > "mv" the thing to where you want it.
> > > >
> > > > HTH - Chuck
> > > >
> > > >
> > > >
> > > > Visit me at http://www.valstar.net/~hallenbeck
> > > > The Moon is Waning Crescent (17% of Full)
> > > >
> > > >
> > > > _______________________________________________
> > > > Speakup mailing list
> > > > Speakup@braille.uwo.ca
> > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> > >
> > > _________________________________________________________
> > > Do You Yahoo!?
> > > Get your free @yahoo.com address at http://mail.yahoo.com
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup@braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> >
> > Visit me at http://www.valstar.net/~hallenbeck
> > The Moon is Waning Crescent (16% of Full)
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup



  parent reply	other threads:[~ UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
 trplayer and realplayer Deedra Waters
 ` Dave Hunt <
   ` Deedra Waters
     ` Dave Hunt <
       ` Deedra Waters
       ` Igor Gueths
     ` Shaun Oliver
       ` Deedra Waters
         ` Shaun Oliver
           ` Igor Gueths
             ` Gregory Nowak
               ` Shaun Oliver
                 ` Gregory Nowak
             ` Shaun Oliver
               ` Igor Gueths
                 ` Charles Hallenbeck
                   ` Igor Gueths
                     ` Gregory Nowak
                       ` Igor Gueths
                     ` Charles Hallenbeck
                       ` Gregory Nowak
                         ` cp Pete
                           ` cp Gregory Nowak
                             ` cp Pete
                           ` Thomas Ward [this message]
                             ` cp Pete
                   ` trplayer and realplayer Steve Holmes
                 ` Pete
     ` Gregory Nowak
     ` Thomas Ward
 ` Dave Hunt <
 ` Thomas Ward

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='00cc01c1c90f$61c557e0$0100a8c0@tward' \
    --to=tward@bright.net \
    --cc=speakup@braille.uwo.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).