Re: Redhat6.1 boot disks with Speakup don't seem to work withDoubleTalk LT

["Victor Tsaran" <vtsaran@nimbus.ocis.temple.edu>]

Janina, I did what you suggested, but nothing works still. Here is what I
did:

downloaded ltlkb.bin

with rawrite copied it onto an empty floppy.
Connected Doubletalk LT to com1, both machines are desktops, BTW.
Reboot computer, prompt comes up. I type

text <ENTER>

The booting process proceeds as if there is no speakup built-in.
Do you have any other suggestions?
Vic

----- Original Message -----
From: "Janina Sajka" <janina@afb.net>
To: <speakup@braille.uwo.ca>
Cc: <speakup@speech.braille.uwo.ca>
Sent: Thursday, May 11, 2000 1:13 PM
Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
withDoubleTalk LT


> Vic:
>
> I had the same problem with my IBM Thinkpad 560Z.
>
> The issue turned out to be that the serial port on  the backplane of the
> Thinkpad was being seen by Linux as ttyS1. Seems the irda port on the
> front plane is ttyS0. So, the fix was to add the following at the boot
> prompt:
>
> speakup_ser=1
>
> so my boot prompt response became:
>
> text speakup_ser=1
>
> That did it.
>  On Thu, 11 May 2000, Victor Tsaran
> wrote:
>
> > I downloaded the boot disk for RedHat6.1, ltlkb.bin, and copied it onto
a
> > floppy. I tried it on two machines and in both cases the machines
booted, but
> > no speech ever came up. Anyone have an idea why this behavior?
> > Vic
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup@braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup@braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup