* Raspberry pi 3 [not found] <58F588DF-F64C-482C-A02D-E5F1EF0C664C.ref@yahoo.com> @ ` blinux-list ` blinux-list ` (3 more replies) 0 siblings, 4 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Hi guys, I am taking a class on IOT and they are saying I need to order a raspberry pi 3 Canakit and a monitor to do the work in the class. Does anyone know if this could be connected into a system running Slint so I can do my work on it? Any help would be greatly appreciated. Thank you, Ashley Breger ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` Raspberry pi 3 blinux-list @ ` blinux-list ` blinux-list ` blinux-list ` (2 subsequent siblings) 3 siblings, 1 reply; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Slint is exclusively an x86 distro, so no way to run it directly on the Pi, but you should be able to write any image to an SD card using any flavor of Linux, and as long as an ssh server is installed and enabled on the Pi, you should be able to access it from any Linux system with a ssh client. That said, you might want to check out raspberryvi.org and the Raspberry VI mailing list which are dedicated specifically to using the Pi as a visually impaired or blind user. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` blinux-list @ ` blinux-list ` blinux-list ` blinux-list 0 siblings, 2 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Thank you for the info. I subscribed to the mailing list however, they did not list an email address for the group. Do you happen to know what the list email addresses? Ashley Breger > On Aug 20, 2022, at 6:43 PM, Linux for blind general discussion <blinux-list at redhat.com> wrote: > > ?Slint is exclusively an x86 distro, so no way to run it directly on > the Pi, but you should be able to write any image to an SD card using > any flavor of Linux, and as long as an ssh server is installed and > enabled on the Pi, you should be able to access it from any Linux > system with a ssh client. > > That said, you might want to check out raspberryvi.org and the > Raspberry VI mailing list which are dedicated specifically to using > the Pi as a visually impaired or blind user. > > _______________________________________________ > Blinux-list mailing list > Blinux-list at redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` blinux-list @ ` blinux-list ` blinux-list 1 sibling, 0 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) The e-maill address for posting to the Raspberry VI Mailing list is: raspberry-vi at freelists.org On 8/21/22, Linux for blind general discussion <blinux-list at redhat.com> wrote: > Thank you for the info. I subscribed to the mailing list however, they did > not list an email address for the group. Do you happen to know what the list > email addresses? > > Ashley Breger > >> On Aug 20, 2022, at 6:43 PM, Linux for blind general discussion >> <blinux-list at redhat.com> wrote: >> >> ?Slint is exclusively an x86 distro, so no way to run it directly on >> the Pi, but you should be able to write any image to an SD card using >> any flavor of Linux, and as long as an ssh server is installed and >> enabled on the Pi, you should be able to access it from any Linux >> system with a ssh client. >> >> That said, you might want to check out raspberryvi.org and the >> Raspberry VI mailing list which are dedicated specifically to using >> the Pi as a visually impaired or blind user. >> >> _______________________________________________ >> Blinux-list mailing list >> Blinux-list at redhat.com >> https://listman.redhat.com/mailman/listinfo/blinux-list >> > > _______________________________________________ > Blinux-list mailing list > Blinux-list at redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` blinux-list ` blinux-list @ ` blinux-list 1 sibling, 0 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Hi Ashley, the email address is raspberry-vi at freelists.org This list being hosted @ freelists.org as the Slint mailing list, the commands are the same, so to know more you can email the robot raspberry-vi-request at freelists.org (not raspberry-vi at freelists.org) with as subject 'help' or 'commands'. The list's archive is @ https://www.freelists.org/archive/raspberry-vi/ To access the pi into ssh you can just use the "ssh" command in console mode. Cheers, Didier Le 21/08/2022 ? 04:04, Linux for blind general discussion a ?crit?: > Thank you for the info. I subscribed to the mailing list however, they did not list an email address for the group. Do you happen to know what the list email addresses? > > Ashley Breger > >> On Aug 20, 2022, at 6:43 PM, Linux for blind general discussion <blinux-list at redhat.com> wrote: >> >> ?Slint is exclusively an x86 distro, so no way to run it directly on >> the Pi, but you should be able to write any image to an SD card using >> any flavor of Linux, and as long as an ssh server is installed and >> enabled on the Pi, you should be able to access it from any Linux >> system with a ssh client. >> >> That said, you might want to check out raspberryvi.org and the >> Raspberry VI mailing list which are dedicated specifically to using >> the Pi as a visually impaired or blind user. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` Raspberry pi 3 blinux-list ` blinux-list @ ` blinux-list ` blinux-list ` blinux-list 3 siblings, 0 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) On 8/21/2022 1:28 AM, Linux for blind general discussion wrote: > Hi guys, Do not forget the laydies!!! :) > I am taking a class on IOT and they are saying I need to order a raspberry pi 3 Canakit and a monitor to do the work in the class. Does anyone know if this could be connected into a system running Slint so I > can do my work on it? > You could maybe use the miniUART [1] to connect from the distro of your choise. [1] https://raspberrypi.stackexchange.com/questions/45570/how-do-i-make-serial-work-on-the-raspberry-pi3-pizerow-pi4-or-later-models/45571#45571 -- John Doe ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` Raspberry pi 3 blinux-list ` blinux-list ` blinux-list @ ` blinux-list ` blinux-list ` blinux-list 3 siblings, 1 reply; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Hi Ashley, Sharing an alternative resource in case others here do not come through. There is a list called raspberry vi, as in visual impaired. A site, along with I believe a groups.io community. May wish to connect there, some on the list actually create images for such combined efforts. enjoy this class, Kare On Sat, 20 Aug 2022, Linux for blind general discussion wrote: > Hi guys, > I am taking a class on IOT and they are saying I need to order a raspberry pi 3 Canakit and a monitor to do the work in the class. Does anyone know if this could be connected into a system running Slint so I can do my work on it? > Any help would be greatly appreciated. > Thank you, > > Ashley Breger > > _______________________________________________ > Blinux-list mailing list > Blinux-list at redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` blinux-list @ ` blinux-list 0 siblings, 0 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Would you mind providing me with the email address to subscribe to this group? I don?t see an email address on the page for groups.io. Ashley Breger > On Aug 21, 2022, at 9:56 AM, Linux for blind general discussion <blinux-list at redhat.com> wrote: > > ?Hi Ashley, > Sharing an alternative resource in case others here do not come through. > There is a list called raspberry vi, as in visual impaired. A site, along with I believe a groups.io community. > May wish to connect there, some on the list actually create images for such combined efforts. > enjoy this class, > Kare > > > >> On Sat, 20 Aug 2022, Linux for blind general discussion wrote: >> >> Hi guys, >> I am taking a class on IOT and they are saying I need to order a raspberry pi 3 Canakit and a monitor to do the work in the class. Does anyone know if this could be connected into a system running Slint so I can do my work on it? >> Any help would be greatly appreciated. >> Thank you, >> >> Ashley Breger >> >> _______________________________________________ >> Blinux-list mailing list >> Blinux-list at redhat.com >> https://listman.redhat.com/mailman/listinfo/blinux-list >> >> > > _______________________________________________ > Blinux-list mailing list > Blinux-list at redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` Raspberry pi 3 blinux-list ` (2 preceding siblings ...) ` blinux-list @ ` blinux-list ` blinux-list 3 siblings, 1 reply; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) Hi, Here is a link to a web page for the Raspberry-VI mailing list. There, you will find a place to enter in your email address , and a combo box with "Subscribe" as an option. Link: https://www.freelists.org/list/raspberry-vi Enjoy! Rachel. -----Original Message----- From: Blinux-list <blinux-list-bounces at redhat.com> On Behalf Of Linux for blind general discussion Sent: Saturday, August 20, 2022 4:29 PM To: Linux <blinux-list at redhat.com> Subject: Raspberry pi 3 Hi guys, I am taking a class on IOT and they are saying I need to order a raspberry pi 3 Canakit and a monitor to do the work in the class. Does anyone know if this could be connected into a system running Slint so I can do my work on it? Any help would be greatly appreciated. Thank you, Ashley Breger _______________________________________________ Blinux-list mailing list Blinux-list at redhat.com https://listman.redhat.com/mailman/listinfo/blinux-list ^ permalink raw reply [flat|nested] 12+ messages in thread
* Raspberry pi 3 ` blinux-list @ ` blinux-list ` I have a question, and request? blinux-list 0 siblings, 1 reply; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) In addition to what others have posted, you may also be interested in Stormux, which is a talking distribution for the Raspberry Pi 3 and 4. https://stormux.org/ It's based on ArchLinuxARM, so you will have full access to the Arch User Repository (AUR) if there is a software application you need that you are not able to find in the standard repository. Since you will need the Raspberry Pi 3, you will need the image that boots on it, as the Raspberry Pi 4 image doesn't boot on 3, and the 3 image doesn't boot on 4. Here's the direct download link for the Pi 3 image. https://stormux.org/downloads/stormux-pi3-aarch64-2022-04-21.img.xz The Stormux email list is on groups.io, so just send an empty email message to stormux+subscribe at groups.io and reply to the confirmation email that you will receive. You may also find https://groups.io/helpcenter/membersmanual/1/additional-information/standard-group-email-addresses somewhat useful, as it gives you other email addresses you can use for list management. Hope this helps. ~Kyle ^ permalink raw reply [flat|nested] 12+ messages in thread
* I have a question, and request? ` blinux-list @ ` blinux-list ` blinux-list 0 siblings, 1 reply; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) First the question, I am installing Fedora workstation 36 into a virtual machine on my MacBook Pro 2020. It appears that I have downloaded a live image. So the live image booted up, and did it's thing. A family member who did the reading said that there was a question install to the hard drive, or I think just as a live version. So far the machine has been installing for the better part of an hour and 1/2 or so. Is this normal? Should I now shut down this "light distribution and reboot the virtual machine and try and login? Any suggestions would be helpful. Here's my request if someone on the list knows how to do this. I am in the process of changing email addresses for this list. What is the easiest way to do that. I mostly lurk, so I'm not sure if I have the subscription address. Having that in mind, I am going to put the other address at the bottom of this email and blind carbon copy myself so that if someone has suggestions they can email me off list at the new address explaining how to subscribe at the other email address. Or perhaps the moderator might be of some help. Because I am dictating this to a Windows machine. The place where I'm going to run Lennix, is of course on my Mac MacBook Pro. My new email address, is mauric?@maurice-amines.com this is is you can tell, my domain. Final thoughts, I certainly hope someone can help me sort these two questions out. I also hope that when you do respond if it is something you can do to please write me at the different address, the one that I've written above. Because that's the address that I Chuck 98% of the time. Please be aware that I am dictating this to the computer, so here's hoping that it all comes out okay? What does this mean, hopefully you can read this? Sincerely Maurice Mines. -----Original Message----- From: Blinux-list <blinux-list-bounces at redhat.com> On Behalf Of Linux for blind general discussion Sent: Sunday, August 21, 2022 11:48 AM To: Linux for blind general discussion <blinux-list at redhat.com> Subject: Re: Raspberry pi 3 In addition to what others have posted, you may also be interested in Stormux, which is a talking distribution for the Raspberry Pi 3 and 4. https://stormux.org/ It's based on ArchLinuxARM, so you will have full access to the Arch User Repository (AUR) if there is a software application you need that you are not able to find in the standard repository. Since you will need the Raspberry Pi 3, you will need the image that boots on it, as the Raspberry Pi 4 image doesn't boot on 3, and the 3 image doesn't boot on 4. Here's the direct download link for the Pi 3 image. https://stormux.org/downloads/stormux-pi3-aarch64-2022-04-21.img.xz The Stormux email list is on groups.io, so just send an empty email message to stormux+subscribe at groups.io and reply to the confirmation email that you will receive. You may also find https://groups.io/helpcenter/membersmanual/1/additional-information/standard-group-email-addresses somewhat useful, as it gives you other email addresses you can use for list management. Hope this helps. ~Kyle _______________________________________________ Blinux-list mailing list Blinux-list at redhat.com https://listman.redhat.com/mailman/listinfo/blinux-list ^ permalink raw reply [flat|nested] 12+ messages in thread
* I have a question, and request? ` I have a question, and request? blinux-list @ ` blinux-list 0 siblings, 0 replies; 12+ messages in thread From: blinux-list @ UTC (permalink / raw) On 8/31/2022 4:46 AM, Linux for blind general discussion wrote: > First the question, I am installing Fedora workstation 36 into a virtual machine on my MacBook Pro 2020. It appears that I have downloaded a live image. So the live image booted up, and did it's thing. A family member who did the reading said that there was a question install to the hard drive, or I think just > as a live version. So far the machine has been installing for the better part of an hour and 1/2 or so. Is this normal? Should I now shut down this "light distribution and reboot the virtual machine and try and login? Any suggestions would be helpful. > The installation time is determined by the resources allocated to the guest. According to [1], you should be able to install if you like the live release. If you reboot the VM, it will either restart in live mode or with the distro being installed. > Here's my request if someone on the list knows how to do this. I am in the process of changing email addresses for this list. What is the easiest way to do that. > See [2]. HTH. [1] https://getfedora.org/en/workstation/download/ [2] https://listman.redhat.com/mailman/listinfo/blinux-list -- John Doe ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <58F588DF-F64C-482C-A02D-E5F1EF0C664C.ref@yahoo.com>
` Raspberry pi 3 blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` blinux-list
` I have a question, and request? blinux-list
` blinux-list
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).