* Installing Jenux
@ blinux-list
` blinux-list
0 siblings, 1 reply; 5+ messages in thread
From: blinux-list @ UTC (permalink / raw)
Hi all,
I am thinking about installing Jenux on an external drive, but cannot
recall if it gives you the option to do so.
Otherwise, I might just copy the relevant folders off of my Slint install
to that external drive as a backup, after all, I'll probably hop back to
Slint in short order anyway.
Warm regards,
Brandt Steenkamp
Sent from the Slint console using Alpine
^ permalink raw reply [flat|nested] 5+ messages in thread
* Installing Jenux
Installing Jenux blinux-list
@ ` blinux-list
0 siblings, 0 replies; 5+ messages in thread
From: blinux-list @ UTC (permalink / raw)
You do have a drive selection possibility with jenux. So an external
drive installation ought to work.
On Sat, 19 Feb 2022, Linux for blind general discussion wrote:
> Hi all,
>
> I am thinking about installing Jenux on an external drive, but cannot recall
> if it gives you the option to do so.
>
> Otherwise, I might just copy the relevant folders off of my Slint install to
> that external drive as a backup, after all, I'll probably hop back to Slint in
> short order anyway.
>
> Warm regards,
>
> Brandt Steenkamp
>
> Sent from the Slint console using Alpine
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list at redhat.com
> https://listman.redhat.com/mailman/listinfo/blinux-list
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* installing jenux
@ Linux for blind general discussion
` Linux for blind general discussion
0 siblings, 1 reply; 5+ messages in thread
From: Linux for blind general discussion @ UTC (permalink / raw)
To: orca-list; +Cc: blinux-list
During a jenux install jenux uses fenrir for a screen reader if
accessibility mode is enabled. No boot parameters enables accessibility
mode. During jenux install, much fast text will be spoken by the screen
reader unless insert-f4 is used to toggle speech off and on. I usually
toggle speech off until I hear the computer beep and then I know jenux
installer needs some input. Then I toggle speech back on and inspect the
screen and answer questions. In the mate install path, there's no beep
before the system asks for the user name and password for the first time
and this is after all packages have been installed. Those questions could
be moved ahead of package installation and answers stored in and retrieved
from variables but that's not now the case with this installer. I got a
mate install with jenux and you log in on the console which is good with
fenrir then fenrir turns off and the mate environment comes up and orca
turns on. I've done a base install with no difficulty earlier. I will
try a gnome install next to see if that now works. When these installs
fail it's usually because the developer is working on what fails to
download so when that happens maybe try another install later. The base
install which is archlinux console uses fenrir to run.
--
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: installing jenux
installing jenux Linux for blind general discussion
@ ` Linux for blind general discussion
` Linux for blind general discussion
0 siblings, 1 reply; 5+ messages in thread
From: Linux for blind general discussion @ UTC (permalink / raw)
To: Linux for blind general discussion
can I please get the url to download the latest iso image of ginux?
the download on your site times out
Hank
On 3/27/2020 9:20 AM, Linux for blind general discussion wrote:
> During a jenux install jenux uses fenrir for a screen reader if
> accessibility mode is enabled. No boot parameters enables accessibility
> mode. During jenux install, much fast text will be spoken by the screen
> reader unless insert-f4 is used to toggle speech off and on. I usually
> toggle speech off until I hear the computer beep and then I know jenux
> installer needs some input. Then I toggle speech back on and inspect the
> screen and answer questions. In the mate install path, there's no beep
> before the system asks for the user name and password for the first time
> and this is after all packages have been installed. Those questions could
> be moved ahead of package installation and answers stored in and retrieved
> from variables but that's not now the case with this installer. I got a
> mate install with jenux and you log in on the console which is good with
> fenrir then fenrir turns off and the mate environment comes up and orca
> turns on. I've done a base install with no difficulty earlier. I will
> try a gnome install next to see if that now works. When these installs
> fail it's usually because the developer is working on what fails to
> download so when that happens maybe try another install later. The base
> install which is archlinux console uses fenrir to run.
>
>
>
> --
>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: installing jenux
` Linux for blind general discussion
@ ` Linux for blind general discussion
0 siblings, 0 replies; 5+ messages in thread
From: Linux for blind general discussion @ UTC (permalink / raw)
To: Linux for blind general discussion
wget -bc https://nashcentral.duckdns.org/projects/Jenux-2020.02.03-x86_64.iso.sha512
wget -bc https://nashcentral.duckdns.org/projects/Jenux-2020.02.03-x86_64.iso
sha512sum -c Jenux-2020.02.03-x86_64.iso.sha512
On Mon, 30 Mar 2020, Linux for blind general discussion wrote:
> Date: Mon, 30 Mar 2020 12:52:31
> From: Linux for blind general discussion <blinux-list@redhat.com>
> To: Linux for blind general discussion <blinux-list@redhat.com>
> Subject: Re: installing jenux
>
> can I please get the url to download the latest iso image of ginux?
>
> the download on your site times out
>
> Hank
>
>
> On 3/27/2020 9:20 AM, Linux for blind general discussion wrote:
> > During a jenux install jenux uses fenrir for a screen reader if
> > accessibility mode is enabled. No boot parameters enables accessibility
> > mode. During jenux install, much fast text will be spoken by the screen
> > reader unless insert-f4 is used to toggle speech off and on. I usually
> > toggle speech off until I hear the computer beep and then I know jenux
> > installer needs some input. Then I toggle speech back on and inspect the
> > screen and answer questions. In the mate install path, there's no beep
> > before the system asks for the user name and password for the first time
> > and this is after all packages have been installed. Those questions could
> > be moved ahead of package installation and answers stored in and retrieved
> > from variables but that's not now the case with this installer. I got a
> > mate install with jenux and you log in on the console which is good with
> > fenrir then fenrir turns off and the mate environment comes up and orca
> > turns on. I've done a base install with no difficulty earlier. I will
> > try a gnome install next to see if that now works. When these installs
> > fail it's usually because the developer is working on what fails to
> > download so when that happens maybe try another install later. The base
> > install which is archlinux console uses fenrir to run.
> >
> >
> >
> > --
> >
> >
> > _______________________________________________
> > Blinux-list mailing list
> > Blinux-list@redhat.com
> > https://www.redhat.com/mailman/listinfo/blinux-list
> >
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
>
--
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
Installing Jenux blinux-list
` blinux-list
-- strict thread matches above, loose matches on Subject: below --
installing jenux Linux for blind general discussion
` Linux for blind general discussion
` Linux for blind general discussion
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).