Speak-Freely Question.

Speak-Freely Question.

[Watson, Keith]

Ok, here's the situ, My linux box is connected to a cable/dsl router (Great
firewall) But I cannot receive incoming packets from speakfreely. I need to
know what ports to open in order to pass the packets successfully. Can
anyone help.

Thx

Keith

Re: Speak-Freely Question.

[Jim Danley]

Having just recently done this for my network, the details are still
fresh in my mind.

You need to allow UDP on ports 2074 and 2075 then TCP on port 2076.
if you are planning to run or connect to a reflector, then allow UDP on
ports 4074 and 4075 then TCP on port 4076.

	Jim

On Thu, Nov 09, 2000 at 12:48:05PM -0500, Watson, Keith wrote:
> Ok, here's the situ, My linux box is connected to a cable/dsl router (Great
> firewall) But I cannot receive incoming packets from speakfreely. I need to
> know what ports to open in order to pass the packets successfully.

Re: Speak-Freely Question.

[Andor Demarteau]

the 2076 and probably the 4076 ports are for the LWL (look whois
listening) services and are not needed by speakfrely itself.
The lowper-port of the 2 is the data-port, the upper-one is the
control-port.
Reflectors need a darn lot of bandwith btw, so keep that in mind.

The program itself works prefectly, it even does a good job wiht it's
windoz counterpart.

On Thu, 9 Nov 2000, Jim Danley wrote:

 > Having just recently done this for my network, the details are still
 > fresh in my mind.
 > 
 > You need to allow UDP on ports 2074 and 2075 then TCP on port 2076.
 > if you are planning to run or connect to a reflector, then allow UDP on
 > ports 4074 and 4075 then TCP on port 4076.
 > 
 > 	Jim
 > 
 > On Thu, Nov 09, 2000 at 12:48:05PM -0500, Watson, Keith wrote:
 > > Ok, here's the situ, My linux box is connected to a cable/dsl router (Great
 > > firewall) But I cannot receive incoming packets from speakfreely. I need to
 > > know what ports to open in order to pass the packets successfully.
 > 
 > 
 > 
 > _______________________________________________
 > Blinux-list mailing list
 > Blinux-list@redhat.com
 > https://listman.redhat.com/mailman/listinfo/blinux-list
 > 

slainte leat freisin (cheers to you also),
-----------
Andor Demarteau           E-mail: ademarte@students.cs.uu.nl
student computer science  www: http://www.students.cs.uu.nl/~ademarte/
Utrecht University        note: homepage is outdated, don't remind me!
-----------
Believe in yourself, know what you want, and make it happen!

Re: Speak-Freely Question.

[rafal polonski]

On Thu, Nov 09, 2000 at 12:48:25PM -0500, Watson, Keith wrote:
> Ok, here's the situ, My linux box is connected to a cable/dsl router (Great
> firewall) But I cannot receive incoming packets from speakfreely. I need to
> know what ports to open in order to pass the packets successfully. Can

Speak Freely communicates using Internet UDP protocol on non-privileged
port 2074

have a good day.
-- 

Re: Speak-Freely Question.

[Dave Mielke]

[quoted lines by rafal polonski on November 9, 2000, at 19:10]

>Speak Freely communicates using Internet UDP protocol on non-privileged
>port 2074

For the audio. It also passes control information on UDP port 2075. Also, if
you wish to communicate over a reflector, the default reflector ports are 4074
and 4075 (both UDP).

-- 
Dave Mielke           | 2213 Fox Crescent | I believe that the Bible is the
Phone: 1-613-726-0014 | Ottawa, Ontario   | Word of God. Please contact me
EMail: dave@mielke.cc | Canada  K2A 1H7   | if you're concerned about Hell.