* lt and screader.
@ stp
[not found] ` <gFef10r1J8+a089yn@ccs.covici.com>
` Jos Lemmens
0 siblings, 2 replies; 6+ messages in thread
From: stp @ UTC (permalink / raw)
To: blinux-list
Hi guys. I'm having a problem getting my doubletalk lt and screader to
work. Here's what I know.
In order for the doubltalk to speek the text that is sent to it, it needs
to have a "null" character sent to it. Well, with screader I don't think
it sends the required null character so it gets ignored. Does anyone know
how I can get this to work? I followed the installation instructions that
came with screader. It's just that the lt doesn't respond.
^ permalink raw reply [flat|nested] 6+ messages in thread[parent not found: <gFef10r1J8+a089yn@ccs.covici.com>]
* Re: lt and screader.
[not found] ` <gFef10r1J8+a089yn@ccs.covici.com>
@ ` John Covici
0 siblings, 0 replies; 6+ messages in thread
From: John Covici @ UTC (permalink / raw)
To: blinux-list
Well, if your tts says
`cat >/dev/cua0`
you might try something like
`(cat ;echo -e \00 ) >/dev/cua0`
or if a space is required rather than a null just say echo " "
instead.
Hope this helps.
on Tue, 9 Jun 1998 17:59:07 -0400 (EDT) <stp@shell.flite.net> in
<Pine.LNX.3.96.980609175646.5941A-100000@shell.flite.net> wrote:
>Hi guys. I'm having a problem getting my doubletalk lt and screader to
>work. Here's what I know.
>In order for the doubltalk to speek the text that is sent to it, it needs
>to have a "null" character sent to it. Well, with screader I don't think
>it sends the required null character so it gets ignored. Does anyone know
>how I can get this to work? I followed the installation instructions that
>came with screader. It's just that the lt doesn't respond.
>
>
>---
>Send your message for blinux-list to blinux-list@redhat.com
>Blinux software archive at ftp://leb.net/pub/blinux
>Blinux web page at http://leb.net/blinux
>To unsubscribe send mail to blinux-list-request@redhat.com
>with subject line: unsubscribe
--
John Covici
covici@ccs.covici.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: lt and screader.
lt and screader stp
[not found] ` <gFef10r1J8+a089yn@ccs.covici.com>
@ ` Jos Lemmens
` Screader and the Dectalk PC Jason Castonguay
1 sibling, 1 reply; 6+ messages in thread
From: Jos Lemmens @ UTC (permalink / raw)
To: blinux-list
Hello Tommy,
> Hi guys. I'm having a problem getting my doubletalk lt and screader to
> work. Here's what I know.
> In order for the doubltalk to speek the text that is sent to it, it needs
> to have a "null" character sent to it. Well, with screader I don't think
> it sends the required null character so it gets ignored. Does anyone know
> how I can get this to work? I followed the installation instructions that
> came with screader. It's just that the lt doesn't respond.
>
Put something like the following in your /opt/etc/abt320/tts:
(cat; echo -ne "\000") > /dev/cua1
If the null-character has to be in the front of the text, please
put first the echo command and then the cat command. Be sure these
commands need to be inside the () and must be separated by the ; token.
I've no DT myself so I don't know exactly where to put the ( and )
tokens. Maybe you have to put a \ before the " tokens.
Regards,
Jos.
--
-------------------------------
Jos Lemmens
The Netherlands
E-mail: jlemmens@inter.NL.net
Homepage: www.inter.nl.net/users/jlemmens
^ permalink raw reply [flat|nested] 6+ messages in thread* Screader and the Dectalk PC
` Jos Lemmens
@ ` Jason Castonguay
` Jos Lemmens
0 siblings, 1 reply; 6+ messages in thread
From: Jason Castonguay @ UTC (permalink / raw)
To: blinux-list
I know Iblinux-list@redhat.comRe: lt and screader.
Hi there everyone. I know this question has probably been asked several
times before, and someone will undoubtedly get rather annoyed with me
<grin>
Does Screader work with the internal Dectalk PC? I have the Linux Dectalk
PC drivers already, and they work fine.
Thanks for your cooperation and toleration <g>.
Regards,
--
Jason
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Screader and the Dectalk PC
` Screader and the Dectalk PC Jason Castonguay
@ ` Jos Lemmens
` Nicolas Pitre
0 siblings, 1 reply; 6+ messages in thread
From: Jos Lemmens @ UTC (permalink / raw)
To: blinux-list
Hello Jason,
If something like:
echo hello > /dev/cua0
works, then screader will also work.
Is that card of yours connected to a serial device?
I told this quite often. *grin*.
Best Regards,
Jos.
> Hi there everyone. I know this question has probably been asked several
> times before, and someone will undoubtedly get rather annoyed with me
> <grin>
>
> Does Screader work with the internal Dectalk PC? I have the Linux Dectalk
> PC drivers already, and they work fine.
>
> Thanks for your cooperation and toleration <g>.
>
>
> Regards,
>
> --
> Jason
>
> ---
> Send your message for blinux-list to blinux-list@redhat.com
> Blinux software archive at ftp://leb.net/pub/blinux
> Blinux web page at http://leb.net/blinux
> To unsubscribe send mail to blinux-list-request@redhat.com
> with subject line: unsubscribe
>
--
-------------------------------
Jos Lemmens
Madoerastraat 78
3131 ZL Vlaardingen
The Netherlands
Tel.: + 31-10-248 0 266
E-mail: jlemmens@inter.NL.net
Homepage: www.inter.nl.net/users/jlemmens
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Screader and the Dectalk PC
` Jos Lemmens
@ ` Nicolas Pitre
0 siblings, 0 replies; 6+ messages in thread
From: Nicolas Pitre @ UTC (permalink / raw)
To: Jos Lemmens; +Cc: blinux-list
The Dectalk PC driver uses /dev/dtpc0 as its device name. It should be
transparently compatible with a Dectalk Express found on /dev/cua0 for
example.
On Wed, 10 Jun 1998, Jos Lemmens wrote:
> Hello Jason,
>
> If something like:
>
> echo hello > /dev/cua0
>
> works, then screader will also work.
> Is that card of yours connected to a serial device?
> I told this quite often. *grin*.
>
> Best Regards,
>
> Jos.
>
> > Hi there everyone. I know this question has probably been asked several
> > times before, and someone will undoubtedly get rather annoyed with me
> > <grin>
> >
> > Does Screader work with the internal Dectalk PC? I have the Linux Dectalk
> > PC drivers already, and they work fine.
> >
> > Thanks for your cooperation and toleration <g>.
> >
> >
> > Regards,
> >
> > --
> > Jason
> >
> > ---
> > Send your message for blinux-list to blinux-list@redhat.com
> > Blinux software archive at ftp://leb.net/pub/blinux
> > Blinux web page at http://leb.net/blinux
> > To unsubscribe send mail to blinux-list-request@redhat.com
> > with subject line: unsubscribe
> >
>
>
> --
>
> -------------------------------
> Jos Lemmens
> Madoerastraat 78
> 3131 ZL Vlaardingen
> The Netherlands
> Tel.: + 31-10-248 0 266
> E-mail: jlemmens@inter.NL.net
> Homepage: www.inter.nl.net/users/jlemmens
>
> ---
> Send your message for blinux-list to blinux-list@redhat.com
> Blinux software archive at ftp://leb.net/pub/blinux
> Blinux web page at http://leb.net/blinux
> To unsubscribe send mail to blinux-list-request@redhat.com
> with subject line: unsubscribe
>
>
Nicolas Pitre, B. ing.
nico@cam.org
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
lt and screader stp
[not found] ` <gFef10r1J8+a089yn@ccs.covici.com>
` John Covici
` Jos Lemmens
` Screader and the Dectalk PC Jason Castonguay
` Jos Lemmens
` Nicolas Pitre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).