re svlpro The settings in the dectalk.ini file that comes with svlpro are the result

re svlpro The settings in the dectalk.ini file that comes with svlpro are the result

[Brett Barback]

of my reading of dec's manual for the dectalk that were sent to me by other users
of the blinux list.
   Since i don't have the dectalk i didnt have any way to verify if the settings
were correct or not.
   With the last relase i got reports from dectalk users with changes to the 
settings i had in there, and apparently  these synth commands tend to change 
according to the model and version of the device people have.
   The reason i built svlpro the way i did was to allow a user to fiddle with 
the .ini files and be able to correct improper settings and  such.
   because people are using the dtpc module i read thru that code to see what 
was going on in order to make svlpro work with it.
   The fact that people are getting speech at all is a plus , and i think its 
safe to say that getting perfect speech thru the dectalk as i do with my cheapo 
echo  synth is academic at this point.
   As I have indicated before i am working on an external driver which i hope
to build support for all of svlpro's supported synths, both internal and serial
devices, and will probably move alot
of what svlpro is handling now, over to that program .
this will also ensure that security issues wont be anything to worry about 
since the driver program will handle anything requiring root priviledges and 
can be started when the system boots.
   I will re-read the dectalk docs and  examine the .ini files to check for 
accuracy and see what may be necessary to get dectalk yapping with svlpro.
  Thanks for the prompt reports, and good luck
regards, brett barback

Re: re svlpro The settings in the dectalk.ini file that comes with svlpro are the result

[Jacob Schmude]

Thanks. I wouldn't know why the commands are different but I'll search
through my commands file that came with my dos install and see if I can
find any errors in the .ini files.



On Mon, 8 Mar 1999, Brett Barback wrote:

> of my reading of dec's manual for the dectalk that were sent to me by other users
> of the blinux list.
>    Since i don't have the dectalk i didnt have any way to verify if the settings
> were correct or not.
>    With the last relase i got reports from dectalk users with changes to the 
> settings i had in there, and apparently  these synth commands tend to change 
> according to the model and version of the device people have.
>    The reason i built svlpro the way i did was to allow a user to fiddle with 
> the .ini files and be able to correct improper settings and  such.
>    because people are using the dtpc module i read thru that code to see what 
> was going on in order to make svlpro work with it.
>    The fact that people are getting speech at all is a plus , and i think its 
> safe to say that getting perfect speech thru the dectalk as i do with my cheapo 
> echo  synth is academic at this point.
>    As I have indicated before i am working on an external driver which i hope
> to build support for all of svlpro's supported synths, both internal and serial
> devices, and will probably move alot
> of what svlpro is handling now, over to that program .
> this will also ensure that security issues wont be anything to worry about 
> since the driver program will handle anything requiring root priviledges and 
> can be started when the system boots.
>    I will re-read the dectalk docs and  examine the .ini files to check for 
> accuracy and see what may be necessary to get dectalk yapping with svlpro.
>   Thanks for the prompt reports, and good luck
> regards, brett barback
> 
> ---
> Send your message for blinux-list to blinux-list@redhat.com
> Blinux software archive at ftp://leb.net/pub/blinux
> Blinux web page at http://leb.net/blinux
> To unsubscribe send mail to blinux-list-request@redhat.com
> with subject line: unsubscribe
>