From: Jude DaShiell <jdashiel@shellworld.net>
To: blinux-list@redhat.com
Subject: linksys ethernet card to install
Date: Fri, 15 Mar 2002 13:14:30 -0500 (EST) [thread overview]
Message-ID: <Pine.BSF.4.44.0203151302220.70923-100000@server1.shellworld.net> (raw)
I used ethtool -i eth0 once I put the card in the machine. I got the
netdrivers3.11-i386.rpm file and installed that and built it. Now after a
system reboot when I do ethtool -i eth0 I get the tulip interface info and
a bus address for the ethernet card which matches what's shown by lspci.
I had to install an earlier version of roaring penguin since it has
adsl-setup. I ran adsl-setup successfully and have the splitter and
filter and modem hooked to the wall outlet and modem and to power and the
computer's eth0 port. adsl-start times out so I don't know where to go
from here. The provider provides all dns addresses and netconfig only
allows for bootp (dhcp) as a connect method. I'm using emacspeak and
terminal applications like netconfig and the like don't play well with it.
I don't know what addresses to provide netconfig in this situation either.
verizon doesn't support linux either though they do provide dsl service.
I could use 127.0.0.1. The modem has all green lights so if I can get out
to it all should work. netstat -i says it has an error and can't get
interface information.
reply other threads:[~ UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.BSF.4.44.0203151302220.70923-100000@server1.shellworld.net \
--to=jdashiel@shellworld.net \
--cc=blinux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).