From: "Pratik Patel" <pratikweb@hotmail.com>
To: <blinux-list@redhat.com>
Subject: Re: video problem.
Date: Tue, 25 Jun 2002 16:51:26 -0400 [thread overview]
Message-ID: <DAV49E9GQvnbEG10Gai0000007a@hotmail.com> (raw)
In-Reply-To: <Pine.LNX.4.44.0206242142420.16696-100000@toccata.rednote.net>
Hello,
Thank you very much for tyring to help with this problem.
I had already tried to go into console. It wouldn't give my friend the
screen.
THank you for the document. Unfortunately my friend doesn't need the the
speaking version. I already have a speaking version on my computer and mine
works quite well. I used the original non-final version of the HOWTO.
Since I was asking him to type the commands over the phone, he must have
been typing something wrong. I had him try it again several times. I was
successful in replacing the XF86Config file at last. the monitor is back.
Thank you for the help.
Pratik
Pratik Patel
Managing Director
CUNY Assistive Technology Services
----- Original Message -----
From: "Janina Sajka" <janina@afb.net>
To: <blinux-list@redhat.com>
Sent: Monday, June 24, 2002 9:45 PM
Subject: Re: video problem.
> Well, certainly it doesn't hurt to practice installing. And, a
> good time to do that is when there's nothing very critical yet on
> your system.
>
> However, that may not fix the problem.
>
> Have your friend try pressing Ctrl-Alt-F1
>
> That should bring up a text console login. Did you say you've
> done this already?
>
> Since speech is of interest, I'm attaching our latest, not yet
> released, version of our installation HOWTO. Just a few links
> aren't working yet, which is why it isn't released just yet. I
> expect to go live with this very soon.
>
> On Mon, 24 Jun 2002, Pratik Patel wrote:
>
> > Hello,
> >
> > Thank you for the help.
> >
> > I forgot to mention in the previous mail that before running the
> > Xconfigurator, all the data was collected and I used the settings
> > accordingly. Same situation for the monitor. Luckily, my friend was
smart
> > enough to keep all the docs shipped with his original machine.
> >
> > I would love to run Xconfigurator again. The only problem is that he is
not
> > running a speech install and nothing is coming up on the screen. I
think
> > I'll probably have to reinstall. It might just be worthwhile to spend
the
> > time to do the installation again.
> >
> > I'l do some reading on the net.
> >
> > Thanks for the suggestions.
> >
> > Pratik
> >
> >
> > Pratik Patel
> > Managing Director
> > CUNY Assistive Technology Services
> >
> > ----- Original Message -----
> > From: "Janina Sajka" <janina@afb.net>
> > To: <blinux-list@redhat.com>
> > Sent: Monday, June 24, 2002 2:19 PM
> > Subject: Re: video problem.
> >
> >
> > > First of all, it's not unusual to have video issues with
> > > Xconfiguration, especially for older hardware. You should collect
> > > some data--about the video card, it's memory, and about the
> > > monitor involved. Then, do some searching and reading on line
> > > about this hardware. Also, run Xconfigurator again and do
> > > different settings.
> > >
> > > There's no reason to reinstall, but you may need drivers you did
> > > not get with your last install--so do some looking around on the
> > > net.
> > >
> > > Also, you might want to upgrade to RH 7.3 which is current,
> > > though I don't have high hopes that this video issue is related
> > > to the RH version.
> > >
> > >
> > > --
> > >
> > > Janina Sajka, Director
> > > Technology Research and Development
> > > Governmental Relations Group
> > > American Foundation for the Blind (AFB)
> > >
> > > Email: janina@afb.net Phone: (202) 408-8175
> > >
> > > Chair, Accessibility SIG
> > > Open Electronic Book Forum (OEBF)
> > > http://www.openebook.org
> > >
> > >
> > >
> > > _______________________________________________
> > > Blinux-list mailing list
> > > Blinux-list@redhat.com
> > > https://listman.redhat.com/mailman/listinfo/blinux-list
> > >
> >
> >
> >
> > _______________________________________________
> > Blinux-list mailing list
> > Blinux-list@redhat.com
> > https://listman.redhat.com/mailman/listinfo/blinux-list
> >
>
> --
>
> Janina Sajka, Director
> Technology Research and Development
> Governmental Relations Group
> American Foundation for the Blind (AFB)
>
> Email: janina@afb.net Phone: (202) 408-8175
>
> Chair, Accessibility SIG
> Open Electronic Book Forum (OEBF)
> http://www.openebook.org
>
>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/blinux-list
>
next prev parent reply other threads:[~ UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
how can i get manuals Brian Tew
` video problem Pratik Patel
` Janina Sajka
` Pratik Patel
` Janina Sajka
` Pratik Patel [this message]
` Janina Sajka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DAV49E9GQvnbEG10Gai0000007a@hotmail.com \
--to=pratikweb@hotmail.com \
--cc=blinux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).