* making distros like Asterisk at Home talk from install up through daily use
@ Brent Harding
` Janina Sajka
0 siblings, 1 reply; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: blinux-list
Hi there! I want to know how I could make Asterisk at Home run with a
speakup-enabled Kernel, especially through the installation and all? I want
to use the Asterisk system and Voip and heard this was the easiest way to do
it My old machine I want to make into a Linux box has some core of Fedora on
its secondary 6.whatever gig drive, and the 30 gig has 98 on that I just
want certain files of and that will then be reformatted, and it has my
double talk board I used with that distro. Assuming that the Fedora on there
is still bootable and I remember the Root password, how would I modify the
iso of the Asterisk at Home distro so I could have talking install and then
boot into a talking system? I heard this is the easiest way of running such
a system because you get the webbased admin tools that are set up for that
distro. The last time I tried just replacing the Kernel on an install disk
and reburning, I got module error disaster. How do I prevent that this time?
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from install up through daily use
making distros like Asterisk at Home talk from install up through daily use Brent Harding
@ ` Janina Sajka
` making distros like Asterisk at Home talk from install upthrough " hank
` making distros like Asterisk at Home talk from install upthrough " Brent Harding
0 siblings, 2 replies; 21+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: Linux for blind general discussion
Why? Why particularly Asterisk At Home when Asterisk itselfs works
perfectly well with Speakup.
Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
something here?
Brent Harding writes:
> Hi there! I want to know how I could make Asterisk at Home run with a
> speakup-enabled Kernel, especially through the installation and all? I want
> to use the Asterisk system and Voip and heard this was the easiest way to
> do it My old machine I want to make into a Linux box has some core of
> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on that
> I just want certain files of and that will then be reformatted, and it has
> my double talk board I used with that distro. Assuming that the Fedora on
> there is still bootable and I remember the Root password, how would I
> modify the iso of the Asterisk at Home distro so I could have talking
> install and then boot into a talking system? I heard this is the easiest
> way of running such a system because you get the webbased admin tools that
> are set up for that distro. The last time I tried just replacing the Kernel
> on an install disk and reburning, I got module error disaster. How do I
> prevent that this time?
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
--
Janina Sajka Phone: +1.240.715.1272
Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.
Chair, Accessibility Workgroup Free Standards Group (FSG)
janina@freestandards.org http://a11y.org
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from install upthrough daily use
` Janina Sajka
@ ` hank
` making distros like Asterisk at Home talk from installupthrough " Brent Harding
` making distros like Asterisk at Home talk from install upthrough " Janina Sajka
` making distros like Asterisk at Home talk from install upthrough " Brent Harding
1 sibling, 2 replies; 21+ messages in thread
From: hank @ UTC (permalink / raw)
To: Linux for blind general discussion
cause it has a web gui thats why
my guess is he doesn't want to deal with all the conplex config crap
73
hank smith
amiture radio call sign:
KE7IEF
email:
hanksmith4@earthlink.net
msn messenger:
hanksmith5@hotmail.com
aim:
hanksmith5
skype:
hanksmith5
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 13, 2006 1:24 PM
Subject: Re: making distros like Asterisk at Home talk from install
upthrough daily use
> Why? Why particularly Asterisk At Home when Asterisk itselfs works
> perfectly well with Speakup.
>
> Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
> something here?
>
> Brent Harding writes:
>> Hi there! I want to know how I could make Asterisk at Home run with a
>> speakup-enabled Kernel, especially through the installation and all? I
>> want
>> to use the Asterisk system and Voip and heard this was the easiest way to
>> do it My old machine I want to make into a Linux box has some core of
>> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>> that
>> I just want certain files of and that will then be reformatted, and it
>> has
>> my double talk board I used with that distro. Assuming that the Fedora on
>> there is still bootable and I remember the Root password, how would I
>> modify the iso of the Asterisk at Home distro so I could have talking
>> install and then boot into a talking system? I heard this is the easiest
>> way of running such a system because you get the webbased admin tools
>> that
>> are set up for that distro. The last time I tried just replacing the
>> Kernel
>> on an install disk and reburning, I got module error disaster. How do I
>> prevent that this time?
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
> --
>
> Janina Sajka Phone: +1.240.715.1272
> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> Canada--Go to http://ScreenlessPhone.Com to learn more.
>
> Chair, Accessibility Workgroup Free Standards Group (FSG)
> janina@freestandards.org http://a11y.org
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from install upthrough daily use
` Janina Sajka
` making distros like Asterisk at Home talk from install upthrough " hank
@ ` Brent Harding
` making distros like Asterisk at Home talk from installupthrough " hank
` making distros like Asterisk at Home talk from install upthrough daily use Janina Sajka
1 sibling, 2 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Actually, it's a distribution iso image that contains CentOS, the Asterisk
software which it compiles after the install reboots the system, and various
web and console config tools so you don't have to mess with the complex
config files that often. I would control it remotely, but my other machine
is XP and Windows Telnet and JFW doesn't work well to edit files on remote
systems and I never cared for Festival with Oralux. I wonder how I'd throw
in a talking Kernel and not make the module dependencies not be mismatched?
I'd rather just install the rest of the package over my Fedora I already
left on there, but they built it around this distro.
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 13, 2006 3:24 PM
Subject: Re: making distros like Asterisk at Home talk from install
upthrough daily use
> Why? Why particularly Asterisk At Home when Asterisk itselfs works
> perfectly well with Speakup.
>
> Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
> something here?
>
> Brent Harding writes:
>> Hi there! I want to know how I could make Asterisk at Home run with a
>> speakup-enabled Kernel, especially through the installation and all? I
>> want
>> to use the Asterisk system and Voip and heard this was the easiest way to
>> do it My old machine I want to make into a Linux box has some core of
>> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>> that
>> I just want certain files of and that will then be reformatted, and it
>> has
>> my double talk board I used with that distro. Assuming that the Fedora on
>> there is still bootable and I remember the Root password, how would I
>> modify the iso of the Asterisk at Home distro so I could have talking
>> install and then boot into a talking system? I heard this is the easiest
>> way of running such a system because you get the webbased admin tools
>> that
>> are set up for that distro. The last time I tried just replacing the
>> Kernel
>> on an install disk and reburning, I got module error disaster. How do I
>> prevent that this time?
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
> --
>
> Janina Sajka Phone: +1.240.715.1272
> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> Canada--Go to http://ScreenlessPhone.Com to learn more.
>
> Chair, Accessibility Workgroup Free Standards Group (FSG)
> janina@freestandards.org http://a11y.org
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from install upthrough " hank
@ ` Brent Harding
` making distros like Asterisk at Home talk from install upthrough " Janina Sajka
1 sibling, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Yeah, that's the idea so it's easy to set up. I also don't want to have to
scan my provider's network to find where the machine is (if one can't see
the screen or hear speech because the kernel doesn't provide it, how else
would I tell from my other machine what dhcp address they assign) This is
why a router probably would've been better than a switch, but this is what
no-ip.org and stuff are made for.
----- Original Message -----
From: "hank" <hanksmith4@earthlink.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 13, 2006 3:45 PM
Subject: Re: making distros like Asterisk at Home talk from installupthrough
daily use
> cause it has a web gui thats why
> my guess is he doesn't want to deal with all the conplex config crap
> 73
> hank smith
> amiture radio call sign:
> KE7IEF
> email:
> hanksmith4@earthlink.net
> msn messenger:
> hanksmith5@hotmail.com
> aim:
> hanksmith5
> skype:
> hanksmith5
> ----- Original Message -----
> From: "Janina Sajka" <janina@rednote.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Tuesday, June 13, 2006 1:24 PM
> Subject: Re: making distros like Asterisk at Home talk from install
> upthrough daily use
>
>
>> Why? Why particularly Asterisk At Home when Asterisk itselfs works
>> perfectly well with Speakup.
>>
>> Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>> something here?
>>
>> Brent Harding writes:
>>> Hi there! I want to know how I could make Asterisk at Home run with a
>>> speakup-enabled Kernel, especially through the installation and all? I
>>> want
>>> to use the Asterisk system and Voip and heard this was the easiest way
>>> to
>>> do it My old machine I want to make into a Linux box has some core of
>>> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>>> that
>>> I just want certain files of and that will then be reformatted, and it
>>> has
>>> my double talk board I used with that distro. Assuming that the Fedora
>>> on
>>> there is still bootable and I remember the Root password, how would I
>>> modify the iso of the Asterisk at Home distro so I could have talking
>>> install and then boot into a talking system? I heard this is the easiest
>>> way of running such a system because you get the webbased admin tools
>>> that
>>> are set up for that distro. The last time I tried just replacing the
>>> Kernel
>>> on an install disk and reburning, I got module error disaster. How do I
>>> prevent that this time?
>>>
>>> _______________________________________________
>>> Blinux-list mailing list
>>> Blinux-list@redhat.com
>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>> --
>>
>> Janina Sajka Phone: +1.240.715.1272
>> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>>
>> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> Canada--Go to http://ScreenlessPhone.Com to learn more.
>>
>> Chair, Accessibility Workgroup Free Standards Group (FSG)
>> janina@freestandards.org http://a11y.org
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from install upthrough " Brent Harding
@ ` hank
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from install upthrough daily use Janina Sajka
1 sibling, 1 reply; 21+ messages in thread
From: hank @ UTC (permalink / raw)
To: Linux for blind general discussion
what about configuring it via internet explorer via the web gui?
I have done that as well
73
hank smith
amiture radio call sign:
KE7IEF
email:
hanksmith4@earthlink.net
msn messenger:
hanksmith5@hotmail.com
aim:
hanksmith5
skype:
hanksmith5
----- Original Message -----
From: "Brent Harding" <bharding@doorpi.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 13, 2006 3:35 PM
Subject: Re: making distros like Asterisk at Home talk from installupthrough
daily use
> Actually, it's a distribution iso image that contains CentOS, the Asterisk
> software which it compiles after the install reboots the system, and
> various web and console config tools so you don't have to mess with the
> complex config files that often. I would control it remotely, but my other
> machine is XP and Windows Telnet and JFW doesn't work well to edit files
> on remote systems and I never cared for Festival with Oralux. I wonder how
> I'd throw in a talking Kernel and not make the module dependencies not be
> mismatched? I'd rather just install the rest of the package over my Fedora
> I already left on there, but they built it around this distro.
>
> ----- Original Message -----
> From: "Janina Sajka" <janina@rednote.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Tuesday, June 13, 2006 3:24 PM
> Subject: Re: making distros like Asterisk at Home talk from install
> upthrough daily use
>
>
>> Why? Why particularly Asterisk At Home when Asterisk itselfs works
>> perfectly well with Speakup.
>>
>> Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>> something here?
>>
>> Brent Harding writes:
>>> Hi there! I want to know how I could make Asterisk at Home run with a
>>> speakup-enabled Kernel, especially through the installation and all? I
>>> want
>>> to use the Asterisk system and Voip and heard this was the easiest way
>>> to
>>> do it My old machine I want to make into a Linux box has some core of
>>> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>>> that
>>> I just want certain files of and that will then be reformatted, and it
>>> has
>>> my double talk board I used with that distro. Assuming that the Fedora
>>> on
>>> there is still bootable and I remember the Root password, how would I
>>> modify the iso of the Asterisk at Home distro so I could have talking
>>> install and then boot into a talking system? I heard this is the easiest
>>> way of running such a system because you get the webbased admin tools
>>> that
>>> are set up for that distro. The last time I tried just replacing the
>>> Kernel
>>> on an install disk and reburning, I got module error disaster. How do I
>>> prevent that this time?
>>>
>>> _______________________________________________
>>> Blinux-list mailing list
>>> Blinux-list@redhat.com
>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>> --
>>
>> Janina Sajka Phone: +1.240.715.1272
>> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>>
>> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> Canada--Go to http://ScreenlessPhone.Com to learn more.
>>
>> Chair, Accessibility Workgroup Free Standards Group (FSG)
>> janina@freestandards.org http://a11y.org
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthroughdaily use
` making distros like Asterisk at Home talk from installupthrough " hank
@ ` Brent Harding
0 siblings, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Yeah, that's what I want to do with it, but I'd need to get it installed
into that system. I figure I'm probably going to have to buy a KVM switch
for it even though the keyboard part is all I really need to switch as I
doubt just keyboard switches are made. This is what the asterisk at home
system does, unless there is another way around having to use distros that
don't speak.
----- Original Message -----
From: "hank" <hanksmith4@earthlink.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 13, 2006 6:00 PM
Subject: Re: making distros like Asterisk at Home talk from
installupthroughdaily use
> what about configuring it via internet explorer via the web gui?
> I have done that as well
> 73
> hank smith
> amiture radio call sign:
> KE7IEF
> email:
> hanksmith4@earthlink.net
> msn messenger:
> hanksmith5@hotmail.com
> aim:
> hanksmith5
> skype:
> hanksmith5
> ----- Original Message -----
> From: "Brent Harding" <bharding@doorpi.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Tuesday, June 13, 2006 3:35 PM
> Subject: Re: making distros like Asterisk at Home talk from
> installupthrough daily use
>
>
>> Actually, it's a distribution iso image that contains CentOS, the
>> Asterisk software which it compiles after the install reboots the system,
>> and various web and console config tools so you don't have to mess with
>> the complex config files that often. I would control it remotely, but my
>> other machine is XP and Windows Telnet and JFW doesn't work well to edit
>> files on remote systems and I never cared for Festival with Oralux. I
>> wonder how I'd throw in a talking Kernel and not make the module
>> dependencies not be mismatched? I'd rather just install the rest of the
>> package over my Fedora I already left on there, but they built it around
>> this distro.
>>
>> ----- Original Message -----
>> From: "Janina Sajka" <janina@rednote.net>
>> To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> Sent: Tuesday, June 13, 2006 3:24 PM
>> Subject: Re: making distros like Asterisk at Home talk from install
>> upthrough daily use
>>
>>
>>> Why? Why particularly Asterisk At Home when Asterisk itselfs works
>>> perfectly well with Speakup.
>>>
>>> Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>>> something here?
>>>
>>> Brent Harding writes:
>>>> Hi there! I want to know how I could make Asterisk at Home run with a
>>>> speakup-enabled Kernel, especially through the installation and all? I
>>>> want
>>>> to use the Asterisk system and Voip and heard this was the easiest way
>>>> to
>>>> do it My old machine I want to make into a Linux box has some core of
>>>> Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>>>> that
>>>> I just want certain files of and that will then be reformatted, and it
>>>> has
>>>> my double talk board I used with that distro. Assuming that the Fedora
>>>> on
>>>> there is still bootable and I remember the Root password, how would I
>>>> modify the iso of the Asterisk at Home distro so I could have talking
>>>> install and then boot into a talking system? I heard this is the
>>>> easiest
>>>> way of running such a system because you get the webbased admin tools
>>>> that
>>>> are set up for that distro. The last time I tried just replacing the
>>>> Kernel
>>>> on an install disk and reburning, I got module error disaster. How do I
>>>> prevent that this time?
>>>>
>>>> _______________________________________________
>>>> Blinux-list mailing list
>>>> Blinux-list@redhat.com
>>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>>
>>> --
>>>
>>> Janina Sajka Phone: +1.240.715.1272
>>> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>>>
>>> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>>> Canada--Go to http://ScreenlessPhone.Com to learn more.
>>>
>>> Chair, Accessibility Workgroup Free Standards Group (FSG)
>>> janina@freestandards.org http://a11y.org
>>>
>>> _______________________________________________
>>> Blinux-list mailing list
>>> Blinux-list@redhat.com
>>> https://www.redhat.com/mailman/listinfo/blinux-list
>>>
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from install upthrough daily use
` making distros like Asterisk at Home talk from install upthrough " hank
` making distros like Asterisk at Home talk from installupthrough " Brent Harding
@ ` Janina Sajka
` making distros like Asterisk at Home talk from installupthrough " Brent Harding
1 sibling, 1 reply; 21+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: Linux for blind general discussion
hank writes:
> cause it has a web gui thats why
But he wants it to work with Speakup. I'm confused.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from install upthrough daily use
` making distros like Asterisk at Home talk from install upthrough " Brent Harding
` making distros like Asterisk at Home talk from installupthrough " hank
@ ` Janina Sajka
` making distros like Asterisk at Home talk from installupthrough " Geoff Shang
` making distros like Asterisk at Home talk from installupthrough daily use Brent Harding
1 sibling, 2 replies; 21+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: Linux for blind general discussion
The Asterisk At Home page says it's a web gui. So, if you want it to
work with Speakup, go fix the web markup so it will run with lynx or
elinks or maybe edbrowse.
You're rather asking how to use a hammer to slice an orange, sir.
Janina
Brent Harding writes:
> Actually, it's a distribution iso image that contains CentOS, the Asterisk
> software which it compiles after the install reboots the system, and
> various web and console config tools so you don't have to mess with the
> complex config files that often. I would control it remotely, but my other
> machine is XP and Windows Telnet and JFW doesn't work well to edit files on
> remote systems and I never cared for Festival with Oralux. I wonder how I'd
> throw in a talking Kernel and not make the module dependencies not be
> mismatched? I'd rather just install the rest of the package over my Fedora
> I already left on there, but they built it around this distro.
>
> ----- Original Message -----
> From: "Janina Sajka" <janina@rednote.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Tuesday, June 13, 2006 3:24 PM
> Subject: Re: making distros like Asterisk at Home talk from install
> upthrough daily use
>
>
> >Why? Why particularly Asterisk At Home when Asterisk itselfs works
> >perfectly well with Speakup.
> >
> >Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
> >something here?
> >
> >Brent Harding writes:
> >>Hi there! I want to know how I could make Asterisk at Home run with a
> >>speakup-enabled Kernel, especially through the installation and all? I
> >>want
> >>to use the Asterisk system and Voip and heard this was the easiest way to
> >>do it My old machine I want to make into a Linux box has some core of
> >>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
> >>that
> >>I just want certain files of and that will then be reformatted, and it
> >>has
> >>my double talk board I used with that distro. Assuming that the Fedora on
> >>there is still bootable and I remember the Root password, how would I
> >>modify the iso of the Asterisk at Home distro so I could have talking
> >>install and then boot into a talking system? I heard this is the easiest
> >>way of running such a system because you get the webbased admin tools
> >>that
> >>are set up for that distro. The last time I tried just replacing the
> >>Kernel
> >>on an install disk and reburning, I got module error disaster. How do I
> >>prevent that this time?
> >>
> >>_______________________________________________
> >>Blinux-list mailing list
> >>Blinux-list@redhat.com
> >>https://www.redhat.com/mailman/listinfo/blinux-list
> >
> >--
> >
> >Janina Sajka Phone: +1.240.715.1272
> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >
> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >Canada--Go to http://ScreenlessPhone.Com to learn more.
> >
> >Chair, Accessibility Workgroup Free Standards Group (FSG)
> >janina@freestandards.org http://a11y.org
> >
> >_______________________________________________
> >Blinux-list mailing list
> >Blinux-list@redhat.com
> >https://www.redhat.com/mailman/listinfo/blinux-list
> >
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
--
Janina Sajka Phone: +1.240.715.1272
Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.
Chair, Accessibility Workgroup Free Standards Group (FSG)
janina@freestandards.org http://a11y.org
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from install upthrough daily use Janina Sajka
@ ` Geoff Shang
` making distros like Asterisk at Home talk from installupthroughdaily use hank
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from installupthrough daily use Brent Harding
1 sibling, 2 replies; 21+ messages in thread
From: Geoff Shang @ UTC (permalink / raw)
To: Linux for blind general discussion
Hi,
I think he wants to know how he can get the install of Asterisk At Home to
be speech friendly. However, since it appears he has limited speech
resources so can't use his regular box to host Asterisk, I'd think he'd hit
the same problems.
I personally recommend installing Asterisk on a regular Linux system and
configuring it by hand, or not bothering. Asterisk is highly complicated,
it's get your hands dirty type software that usually generates lots of
questions. the first thing anyone's going to ask if you ask anywhere for
Asterisk help is "What's in <insert config filename here>".
Geoff.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthroughdaily use
` making distros like Asterisk at Home talk from installupthrough " Geoff Shang
@ ` hank
` making distros like Asterisk at Home talk frominstallupthroughdaily use Geoff Shang
` making distros like Asterisk at Home talk frominstallupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
1 sibling, 2 replies; 21+ messages in thread
From: hank @ UTC (permalink / raw)
To: Linux for blind general discussion
there a alternitive pbx then that can be used?
73
hank smith
amiture radio call sign:
KE7IEF
email:
hanksmith4@earthlink.net
msn messenger:
hanksmith5@hotmail.com
aim:
hanksmith5
skype:
hanksmith5
----- Original Message -----
From: "Geoff Shang" <geoff@hitsandpieces.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 9:33 AM
Subject: Re: making distros like Asterisk at Home talk from
installupthroughdaily use
> Hi,
>
> I think he wants to know how he can get the install of Asterisk At Home to
> be speech friendly. However, since it appears he has limited speech
> resources so can't use his regular box to host Asterisk, I'd think he'd
> hit
> the same problems.
>
> I personally recommend installing Asterisk on a regular Linux system and
> configuring it by hand, or not bothering. Asterisk is highly complicated,
> it's get your hands dirty type software that usually generates lots of
> questions. the first thing anyone's going to ask if you ask anywhere for
> Asterisk help is "What's in <insert config filename here>".
>
> Geoff.
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk frominstallupthroughdaily use
` making distros like Asterisk at Home talk from installupthroughdaily use hank
@ ` Geoff Shang
` making distros like Asterisk at Home talkfrominstallupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk frominstallupthroughdaily use Brent Harding
1 sibling, 1 reply; 21+ messages in thread
From: Geoff Shang @ UTC (permalink / raw)
To: Linux for blind general discussion
Hi,
Not that I'm aware of, but that's not the point. This is a PBX, not a
telephone. It's almost necessarily complex. If you're looking to use a web
front-end in order to make it easier to use, then you may do well to
consider whether this is something you really want to get into.
I'm certain that using a front-end will come back to bite you in the end, so
I say "dive straight in".
Geoff.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from install upthrough " Janina Sajka
@ ` Brent Harding
0 siblings, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Well, the install instructions need you to do stuff as root after
installing, including finding the IP address that dhcp will assign and
things like that. I will probably have to set up some dynamic IP client to
get a predictable name to use if the ISP forces an address change, which
they don't do often but they can. After you would get it's IP, you would
then use the normal web browser to surf to the machine and finish setting up
from there.
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 11:21 AM
Subject: Re: making distros like Asterisk at Home talk from installupthrough
daily use
> hank writes:
>> cause it has a web gui thats why
> But he wants it to work with Speakup. I'm confused.
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from install upthrough daily use Janina Sajka
` making distros like Asterisk at Home talk from installupthrough " Geoff Shang
@ ` Brent Harding
` Janina Sajka
1 sibling, 1 reply; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Actually it's not necessarily the web part I want to work with Speakup, but
the linux it comes with. I thought I heard one can just get a tar ball and
install it into anything. What I mean is how I'd put in a Kernel that speaks
versus one that doesn't so I can use the linux console of the system once
it's up to find the IP that gets assigned and to set up dynamic DNS and a
few other things I want on there.
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 11:23 AM
Subject: Re: making distros like Asterisk at Home talk from installupthrough
daily use
> The Asterisk At Home page says it's a web gui. So, if you want it to
> work with Speakup, go fix the web markup so it will run with lynx or
> elinks or maybe edbrowse.
>
> You're rather asking how to use a hammer to slice an orange, sir.
>
> Janina
>
> Brent Harding writes:
>> Actually, it's a distribution iso image that contains CentOS, the
>> Asterisk
>> software which it compiles after the install reboots the system, and
>> various web and console config tools so you don't have to mess with the
>> complex config files that often. I would control it remotely, but my
>> other
>> machine is XP and Windows Telnet and JFW doesn't work well to edit files
>> on
>> remote systems and I never cared for Festival with Oralux. I wonder how
>> I'd
>> throw in a talking Kernel and not make the module dependencies not be
>> mismatched? I'd rather just install the rest of the package over my
>> Fedora
>> I already left on there, but they built it around this distro.
>>
>> ----- Original Message -----
>> From: "Janina Sajka" <janina@rednote.net>
>> To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> Sent: Tuesday, June 13, 2006 3:24 PM
>> Subject: Re: making distros like Asterisk at Home talk from install
>> upthrough daily use
>>
>>
>> >Why? Why particularly Asterisk At Home when Asterisk itselfs works
>> >perfectly well with Speakup.
>> >
>> >Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>> >something here?
>> >
>> >Brent Harding writes:
>> >>Hi there! I want to know how I could make Asterisk at Home run with a
>> >>speakup-enabled Kernel, especially through the installation and all? I
>> >>want
>> >>to use the Asterisk system and Voip and heard this was the easiest way
>> >>to
>> >>do it My old machine I want to make into a Linux box has some core of
>> >>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
>> >>that
>> >>I just want certain files of and that will then be reformatted, and it
>> >>has
>> >>my double talk board I used with that distro. Assuming that the Fedora
>> >>on
>> >>there is still bootable and I remember the Root password, how would I
>> >>modify the iso of the Asterisk at Home distro so I could have talking
>> >>install and then boot into a talking system? I heard this is the
>> >>easiest
>> >>way of running such a system because you get the webbased admin tools
>> >>that
>> >>are set up for that distro. The last time I tried just replacing the
>> >>Kernel
>> >>on an install disk and reburning, I got module error disaster. How do I
>> >>prevent that this time?
>> >>
>> >>_______________________________________________
>> >>Blinux-list mailing list
>> >>Blinux-list@redhat.com
>> >>https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>> >--
>> >
>> >Janina Sajka Phone: +1.240.715.1272
>> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >
>> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> >Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >
>> >Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >janina@freestandards.org http://a11y.org
>> >
>> >_______________________________________________
>> >Blinux-list mailing list
>> >Blinux-list@redhat.com
>> >https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
> --
>
> Janina Sajka Phone: +1.240.715.1272
> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> Canada--Go to http://ScreenlessPhone.Com to learn more.
>
> Chair, Accessibility Workgroup Free Standards Group (FSG)
> janina@freestandards.org http://a11y.org
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthroughdaily use
` making distros like Asterisk at Home talk from installupthrough " Geoff Shang
` making distros like Asterisk at Home talk from installupthroughdaily use hank
@ ` Brent Harding
1 sibling, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Well, I have a box with a double talk in it, and my windows box. I want it
on the one with the double talk in so I don't have to dual boot. That's a
lot of the reason I kept the other older box around so I could keep speech
in Linux. I bet just modifying the Iso to put in a talking kernel won't do
it, and then one would get into the kernel config issues of what to pick
that makes the kernel close to the one they provide but with speakup in it.
----- Original Message -----
From: "Geoff Shang" <geoff@hitsandpieces.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 11:33 AM
Subject: Re: making distros like Asterisk at Home talk from
installupthroughdaily use
> Hi,
>
> I think he wants to know how he can get the install of Asterisk At Home to
> be speech friendly. However, since it appears he has limited speech
> resources so can't use his regular box to host Asterisk, I'd think he'd
> hit
> the same problems.
>
> I personally recommend installing Asterisk on a regular Linux system and
> configuring it by hand, or not bothering. Asterisk is highly complicated,
> it's get your hands dirty type software that usually generates lots of
> questions. the first thing anyone's going to ask if you ask anywhere for
> Asterisk help is "What's in <insert config filename here>".
>
> Geoff.
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk frominstallupthroughdaily use
` making distros like Asterisk at Home talk from installupthroughdaily use hank
` making distros like Asterisk at Home talk frominstallupthroughdaily use Geoff Shang
@ ` Brent Harding
1 sibling, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Maybe there could be. The issues are more with the CentOS the iso comes with
not being talking than anything else. If I could just get the part that runs
after the OS install to run manually on a Fedora I already had on that box,
I could have a talking system that runs Voip and saves a ton of money,
giving me more features than the cable's digital phone plan including the
ability to use soft phones or ATA devices. Assuming one got Kernel sources,
another option would be to hit enter a bunch until things are installed and
recompile a new kernel after I found out the assigned IP address to include
speakup.
----- Original Message -----
From: "hank" <hanksmith4@earthlink.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 1:05 PM
Subject: Re: making distros like Asterisk at Home talk
frominstallupthroughdaily use
> there a alternitive pbx then that can be used?
> 73
> hank smith
> amiture radio call sign:
> KE7IEF
> email:
> hanksmith4@earthlink.net
> msn messenger:
> hanksmith5@hotmail.com
> aim:
> hanksmith5
> skype:
> hanksmith5
> ----- Original Message -----
> From: "Geoff Shang" <geoff@hitsandpieces.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Wednesday, June 14, 2006 9:33 AM
> Subject: Re: making distros like Asterisk at Home talk from
> installupthroughdaily use
>
>
>> Hi,
>>
>> I think he wants to know how he can get the install of Asterisk At Home
>> to
>> be speech friendly. However, since it appears he has limited speech
>> resources so can't use his regular box to host Asterisk, I'd think he'd
>> hit
>> the same problems.
>>
>> I personally recommend installing Asterisk on a regular Linux system and
>> configuring it by hand, or not bothering. Asterisk is highly
>> complicated,
>> it's get your hands dirty type software that usually generates lots of
>> questions. the first thing anyone's going to ask if you ask anywhere for
>> Asterisk help is "What's in <insert config filename here>".
>>
>> Geoff.
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>>
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talkfrominstallupthroughdaily use
` making distros like Asterisk at Home talk frominstallupthroughdaily use Geoff Shang
@ ` Brent Harding
0 siblings, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
I'm thinking that might be the case. I bet I'd probably find some feature I
want that the GUI doesn't support, and only the guys who made that really
know how it altered the files. It just sounded good that people say "set it
up in an hour or less" I don't care really how long it takes, not in a real
rush, just wondered how hard the distro they ship it with would be to
Speakup-enable. I played with Webmin on a provider I was going to put a blog
up on once and sometimes those front ends aren't perfect but they help
newbies out.
----- Original Message -----
From: "Geoff Shang" <geoff@hitsandpieces.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Wednesday, June 14, 2006 1:30 PM
Subject: Re: making distros like Asterisk at Home
talkfrominstallupthroughdaily use
> Hi,
>
> Not that I'm aware of, but that's not the point. This is a PBX, not a
> telephone. It's almost necessarily complex. If you're looking to use a
> web
> front-end in order to make it easier to use, then you may do well to
> consider whether this is something you really want to get into.
>
> I'm certain that using a front-end will come back to bite you in the end,
> so
> I say "dive straight in".
>
> Geoff.
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthrough daily use
` making distros like Asterisk at Home talk from installupthrough daily use Brent Harding
@ ` Janina Sajka
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
0 siblings, 1 reply; 21+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: Linux for blind general discussion
OK, some facts.
Asterisk is 100% accessible.
Asterisk is not simple.
Asterisk does not require a special kernel.
You may need additional kernel modules for some PBX hardware, but these
compile separately.
Asterisk works 100% with Speakup
Working asterisk rpms and deb files are available that work with
Speakup, so stick to Fedora 5 or to recent Debian.
There are a fair number of us Speakup users running our own Asterisk PBX
systems. I've got one, and the IVR that answers Capital Accessibility
phone calls is running on our Asterisk server on Fedora.
If you go looking for native voip handsets, many of us are particularly
preferring Snom 320 and the soon to be available Snom 300. I use my 320
all the time. In fact, I now have 3 of them.
Janina
Brent Harding writes:
> Actually it's not necessarily the web part I want to work with Speakup, but
> the linux it comes with. I thought I heard one can just get a tar ball and
> install it into anything. What I mean is how I'd put in a Kernel that
> speaks versus one that doesn't so I can use the linux console of the system
> once it's up to find the IP that gets assigned and to set up dynamic DNS
> and a few other things I want on there.
>
> ----- Original Message -----
> From: "Janina Sajka" <janina@rednote.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Wednesday, June 14, 2006 11:23 AM
> Subject: Re: making distros like Asterisk at Home talk from
> installupthrough daily use
>
>
> >The Asterisk At Home page says it's a web gui. So, if you want it to
> >work with Speakup, go fix the web markup so it will run with lynx or
> >elinks or maybe edbrowse.
> >
> >You're rather asking how to use a hammer to slice an orange, sir.
> >
> >Janina
> >
> >Brent Harding writes:
> >>Actually, it's a distribution iso image that contains CentOS, the
> >>Asterisk
> >>software which it compiles after the install reboots the system, and
> >>various web and console config tools so you don't have to mess with the
> >>complex config files that often. I would control it remotely, but my
> >>other
> >>machine is XP and Windows Telnet and JFW doesn't work well to edit files
> >>on
> >>remote systems and I never cared for Festival with Oralux. I wonder how
> >>I'd
> >>throw in a talking Kernel and not make the module dependencies not be
> >>mismatched? I'd rather just install the rest of the package over my
> >>Fedora
> >>I already left on there, but they built it around this distro.
> >>
> >>----- Original Message -----
> >>From: "Janina Sajka" <janina@rednote.net>
> >>To: "Linux for blind general discussion" <blinux-list@redhat.com>
> >>Sent: Tuesday, June 13, 2006 3:24 PM
> >>Subject: Re: making distros like Asterisk at Home talk from install
> >>upthrough daily use
> >>
> >>
> >>>Why? Why particularly Asterisk At Home when Asterisk itselfs works
> >>>perfectly well with Speakup.
> >>>
> >>>Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
> >>>something here?
> >>>
> >>>Brent Harding writes:
> >>>>Hi there! I want to know how I could make Asterisk at Home run with a
> >>>>speakup-enabled Kernel, especially through the installation and all? I
> >>>>want
> >>>>to use the Asterisk system and Voip and heard this was the easiest way
> >>>>to
> >>>>do it My old machine I want to make into a Linux box has some core of
> >>>>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98 on
> >>>>that
> >>>>I just want certain files of and that will then be reformatted, and it
> >>>>has
> >>>>my double talk board I used with that distro. Assuming that the Fedora
> >>>>on
> >>>>there is still bootable and I remember the Root password, how would I
> >>>>modify the iso of the Asterisk at Home distro so I could have talking
> >>>>install and then boot into a talking system? I heard this is the
> >>>>easiest
> >>>>way of running such a system because you get the webbased admin tools
> >>>>that
> >>>>are set up for that distro. The last time I tried just replacing the
> >>>>Kernel
> >>>>on an install disk and reburning, I got module error disaster. How do I
> >>>>prevent that this time?
> >>>>
> >>>>_______________________________________________
> >>>>Blinux-list mailing list
> >>>>Blinux-list@redhat.com
> >>>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>
> >>>--
> >>>
> >>>Janina Sajka Phone: +1.240.715.1272
> >>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >>>
> >>>Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >>>Canada--Go to http://ScreenlessPhone.Com to learn more.
> >>>
> >>>Chair, Accessibility Workgroup Free Standards Group (FSG)
> >>>janina@freestandards.org http://a11y.org
> >>>
> >>>_______________________________________________
> >>>Blinux-list mailing list
> >>>Blinux-list@redhat.com
> >>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>
> >>
> >>_______________________________________________
> >>Blinux-list mailing list
> >>Blinux-list@redhat.com
> >>https://www.redhat.com/mailman/listinfo/blinux-list
> >
> >--
> >
> >Janina Sajka Phone: +1.240.715.1272
> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >
> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >Canada--Go to http://ScreenlessPhone.Com to learn more.
> >
> >Chair, Accessibility Workgroup Free Standards Group (FSG)
> >janina@freestandards.org http://a11y.org
> >
> >_______________________________________________
> >Blinux-list mailing list
> >Blinux-list@redhat.com
> >https://www.redhat.com/mailman/listinfo/blinux-list
> >
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
--
Janina Sajka Phone: +1.240.715.1272
Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.
Chair, Accessibility Workgroup Free Standards Group (FSG)
janina@freestandards.org http://a11y.org
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthroughdaily use
` Janina Sajka
@ ` Brent Harding
` Janina Sajka
0 siblings, 1 reply; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
What is good about these handsets versus others out there? Are they
accessible to set up as far as the handset end of the configuration where
you need to give them the username, password, and server settings? It really
seems odd to use analog phones if you really don't need to on these systems,
assuming you can just pick these up and dial.
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Saturday, June 17, 2006 2:18 PM
Subject: Re: making distros like Asterisk at Home talk from
installupthroughdaily use
> OK, some facts.
>
> Asterisk is 100% accessible.
>
> Asterisk is not simple.
>
> Asterisk does not require a special kernel.
>
> You may need additional kernel modules for some PBX hardware, but these
> compile separately.
>
> Asterisk works 100% with Speakup
>
> Working asterisk rpms and deb files are available that work with
> Speakup, so stick to Fedora 5 or to recent Debian.
>
> There are a fair number of us Speakup users running our own Asterisk PBX
> systems. I've got one, and the IVR that answers Capital Accessibility
> phone calls is running on our Asterisk server on Fedora.
>
> If you go looking for native voip handsets, many of us are particularly
> preferring Snom 320 and the soon to be available Snom 300. I use my 320
> all the time. In fact, I now have 3 of them.
>
> Janina
>
>
>
> Brent Harding writes:
>> Actually it's not necessarily the web part I want to work with Speakup,
>> but
>> the linux it comes with. I thought I heard one can just get a tar ball
>> and
>> install it into anything. What I mean is how I'd put in a Kernel that
>> speaks versus one that doesn't so I can use the linux console of the
>> system
>> once it's up to find the IP that gets assigned and to set up dynamic DNS
>> and a few other things I want on there.
>>
>> ----- Original Message -----
>> From: "Janina Sajka" <janina@rednote.net>
>> To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> Sent: Wednesday, June 14, 2006 11:23 AM
>> Subject: Re: making distros like Asterisk at Home talk from
>> installupthrough daily use
>>
>>
>> >The Asterisk At Home page says it's a web gui. So, if you want it to
>> >work with Speakup, go fix the web markup so it will run with lynx or
>> >elinks or maybe edbrowse.
>> >
>> >You're rather asking how to use a hammer to slice an orange, sir.
>> >
>> >Janina
>> >
>> >Brent Harding writes:
>> >>Actually, it's a distribution iso image that contains CentOS, the
>> >>Asterisk
>> >>software which it compiles after the install reboots the system, and
>> >>various web and console config tools so you don't have to mess with the
>> >>complex config files that often. I would control it remotely, but my
>> >>other
>> >>machine is XP and Windows Telnet and JFW doesn't work well to edit
>> >>files
>> >>on
>> >>remote systems and I never cared for Festival with Oralux. I wonder how
>> >>I'd
>> >>throw in a talking Kernel and not make the module dependencies not be
>> >>mismatched? I'd rather just install the rest of the package over my
>> >>Fedora
>> >>I already left on there, but they built it around this distro.
>> >>
>> >>----- Original Message -----
>> >>From: "Janina Sajka" <janina@rednote.net>
>> >>To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> >>Sent: Tuesday, June 13, 2006 3:24 PM
>> >>Subject: Re: making distros like Asterisk at Home talk from install
>> >>upthrough daily use
>> >>
>> >>
>> >>>Why? Why particularly Asterisk At Home when Asterisk itselfs works
>> >>>perfectly well with Speakup.
>> >>>
>> >>>Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>> >>>something here?
>> >>>
>> >>>Brent Harding writes:
>> >>>>Hi there! I want to know how I could make Asterisk at Home run with a
>> >>>>speakup-enabled Kernel, especially through the installation and all?
>> >>>>I
>> >>>>want
>> >>>>to use the Asterisk system and Voip and heard this was the easiest
>> >>>>way
>> >>>>to
>> >>>>do it My old machine I want to make into a Linux box has some core of
>> >>>>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98
>> >>>>on
>> >>>>that
>> >>>>I just want certain files of and that will then be reformatted, and
>> >>>>it
>> >>>>has
>> >>>>my double talk board I used with that distro. Assuming that the
>> >>>>Fedora
>> >>>>on
>> >>>>there is still bootable and I remember the Root password, how would I
>> >>>>modify the iso of the Asterisk at Home distro so I could have talking
>> >>>>install and then boot into a talking system? I heard this is the
>> >>>>easiest
>> >>>>way of running such a system because you get the webbased admin tools
>> >>>>that
>> >>>>are set up for that distro. The last time I tried just replacing the
>> >>>>Kernel
>> >>>>on an install disk and reburning, I got module error disaster. How do
>> >>>>I
>> >>>>prevent that this time?
>> >>>>
>> >>>>_______________________________________________
>> >>>>Blinux-list mailing list
>> >>>>Blinux-list@redhat.com
>> >>>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>
>> >>>--
>> >>>
>> >>>Janina Sajka Phone: +1.240.715.1272
>> >>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >>>
>> >>>Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> >>>Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >>>
>> >>>Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >>>janina@freestandards.org http://a11y.org
>> >>>
>> >>>_______________________________________________
>> >>>Blinux-list mailing list
>> >>>Blinux-list@redhat.com
>> >>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>
>> >>
>> >>_______________________________________________
>> >>Blinux-list mailing list
>> >>Blinux-list@redhat.com
>> >>https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>> >--
>> >
>> >Janina Sajka Phone: +1.240.715.1272
>> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >
>> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> >Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >
>> >Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >janina@freestandards.org http://a11y.org
>> >
>> >_______________________________________________
>> >Blinux-list mailing list
>> >Blinux-list@redhat.com
>> >https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
> --
>
> Janina Sajka Phone: +1.240.715.1272
> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> Canada--Go to http://ScreenlessPhone.Com to learn more.
>
> Chair, Accessibility Workgroup Free Standards Group (FSG)
> janina@freestandards.org http://a11y.org
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk from installupthroughdaily use
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
@ ` Janina Sajka
` making distros like Asterisk at Home talk frominstallupthroughdaily use Brent Harding
0 siblings, 1 reply; 21+ messages in thread
From: Janina Sajka @ UTC (permalink / raw)
To: Linux for blind general discussion
haven't created a dial plan, you press enter. No big deal.
Point: The Snom 320 and Snom 300 are very easy to configure using lynx.
Other phones I've tried are not easy to configure using our interfaces.
Judge for yourself. Look at:
http://www.provu.co.uk/snom_demo/
Brent Harding writes:
> What is good about these handsets versus others out there? Are they
> accessible to set up as far as the handset end of the configuration where
> you need to give them the username, password, and server settings? It
> really seems odd to use analog phones if you really don't need to on these
> systems, assuming you can just pick these up and dial.
>
> ----- Original Message -----
> From: "Janina Sajka" <janina@rednote.net>
> To: "Linux for blind general discussion" <blinux-list@redhat.com>
> Sent: Saturday, June 17, 2006 2:18 PM
> Subject: Re: making distros like Asterisk at Home talk from
> installupthroughdaily use
>
>
> >OK, some facts.
> >
> >Asterisk is 100% accessible.
> >
> >Asterisk is not simple.
> >
> >Asterisk does not require a special kernel.
> >
> >You may need additional kernel modules for some PBX hardware, but these
> >compile separately.
> >
> >Asterisk works 100% with Speakup
> >
> >Working asterisk rpms and deb files are available that work with
> >Speakup, so stick to Fedora 5 or to recent Debian.
> >
> >There are a fair number of us Speakup users running our own Asterisk PBX
> >systems. I've got one, and the IVR that answers Capital Accessibility
> >phone calls is running on our Asterisk server on Fedora.
> >
> >If you go looking for native voip handsets, many of us are particularly
> >preferring Snom 320 and the soon to be available Snom 300. I use my 320
> >all the time. In fact, I now have 3 of them.
> >
> >Janina
> >
> >
> >
> >Brent Harding writes:
> >>Actually it's not necessarily the web part I want to work with Speakup,
> >>but
> >>the linux it comes with. I thought I heard one can just get a tar ball
> >>and
> >>install it into anything. What I mean is how I'd put in a Kernel that
> >>speaks versus one that doesn't so I can use the linux console of the
> >>system
> >>once it's up to find the IP that gets assigned and to set up dynamic DNS
> >>and a few other things I want on there.
> >>
> >>----- Original Message -----
> >>From: "Janina Sajka" <janina@rednote.net>
> >>To: "Linux for blind general discussion" <blinux-list@redhat.com>
> >>Sent: Wednesday, June 14, 2006 11:23 AM
> >>Subject: Re: making distros like Asterisk at Home talk from
> >>installupthrough daily use
> >>
> >>
> >>>The Asterisk At Home page says it's a web gui. So, if you want it to
> >>>work with Speakup, go fix the web markup so it will run with lynx or
> >>>elinks or maybe edbrowse.
> >>>
> >>>You're rather asking how to use a hammer to slice an orange, sir.
> >>>
> >>>Janina
> >>>
> >>>Brent Harding writes:
> >>>>Actually, it's a distribution iso image that contains CentOS, the
> >>>>Asterisk
> >>>>software which it compiles after the install reboots the system, and
> >>>>various web and console config tools so you don't have to mess with the
> >>>>complex config files that often. I would control it remotely, but my
> >>>>other
> >>>>machine is XP and Windows Telnet and JFW doesn't work well to edit
> >>>>files
> >>>>on
> >>>>remote systems and I never cared for Festival with Oralux. I wonder how
> >>>>I'd
> >>>>throw in a talking Kernel and not make the module dependencies not be
> >>>>mismatched? I'd rather just install the rest of the package over my
> >>>>Fedora
> >>>>I already left on there, but they built it around this distro.
> >>>>
> >>>>----- Original Message -----
> >>>>From: "Janina Sajka" <janina@rednote.net>
> >>>>To: "Linux for blind general discussion" <blinux-list@redhat.com>
> >>>>Sent: Tuesday, June 13, 2006 3:24 PM
> >>>>Subject: Re: making distros like Asterisk at Home talk from install
> >>>>upthrough daily use
> >>>>
> >>>>
> >>>>>Why? Why particularly Asterisk At Home when Asterisk itselfs works
> >>>>>perfectly well with Speakup.
> >>>>>
> >>>>>Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
> >>>>>something here?
> >>>>>
> >>>>>Brent Harding writes:
> >>>>>>Hi there! I want to know how I could make Asterisk at Home run with a
> >>>>>>speakup-enabled Kernel, especially through the installation and all?
> >>>>>>I
> >>>>>>want
> >>>>>>to use the Asterisk system and Voip and heard this was the easiest
> >>>>>>way
> >>>>>>to
> >>>>>>do it My old machine I want to make into a Linux box has some core of
> >>>>>>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98
> >>>>>>on
> >>>>>>that
> >>>>>>I just want certain files of and that will then be reformatted, and
> >>>>>>it
> >>>>>>has
> >>>>>>my double talk board I used with that distro. Assuming that the
> >>>>>>Fedora
> >>>>>>on
> >>>>>>there is still bootable and I remember the Root password, how would I
> >>>>>>modify the iso of the Asterisk at Home distro so I could have talking
> >>>>>>install and then boot into a talking system? I heard this is the
> >>>>>>easiest
> >>>>>>way of running such a system because you get the webbased admin tools
> >>>>>>that
> >>>>>>are set up for that distro. The last time I tried just replacing the
> >>>>>>Kernel
> >>>>>>on an install disk and reburning, I got module error disaster. How do
> >>>>>>I
> >>>>>>prevent that this time?
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Blinux-list mailing list
> >>>>>>Blinux-list@redhat.com
> >>>>>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>>>
> >>>>>--
> >>>>>
> >>>>>Janina Sajka Phone: +1.240.715.1272
> >>>>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >>>>>
> >>>>>Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >>>>>Canada--Go to http://ScreenlessPhone.Com to learn more.
> >>>>>
> >>>>>Chair, Accessibility Workgroup Free Standards Group (FSG)
> >>>>>janina@freestandards.org http://a11y.org
> >>>>>
> >>>>>_______________________________________________
> >>>>>Blinux-list mailing list
> >>>>>Blinux-list@redhat.com
> >>>>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>>>
> >>>>
> >>>>_______________________________________________
> >>>>Blinux-list mailing list
> >>>>Blinux-list@redhat.com
> >>>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>
> >>>--
> >>>
> >>>Janina Sajka Phone: +1.240.715.1272
> >>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >>>
> >>>Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >>>Canada--Go to http://ScreenlessPhone.Com to learn more.
> >>>
> >>>Chair, Accessibility Workgroup Free Standards Group (FSG)
> >>>janina@freestandards.org http://a11y.org
> >>>
> >>>_______________________________________________
> >>>Blinux-list mailing list
> >>>Blinux-list@redhat.com
> >>>https://www.redhat.com/mailman/listinfo/blinux-list
> >>>
> >>
> >>_______________________________________________
> >>Blinux-list mailing list
> >>Blinux-list@redhat.com
> >>https://www.redhat.com/mailman/listinfo/blinux-list
> >
> >--
> >
> >Janina Sajka Phone: +1.240.715.1272
> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
> >
> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> >Canada--Go to http://ScreenlessPhone.Com to learn more.
> >
> >Chair, Accessibility Workgroup Free Standards Group (FSG)
> >janina@freestandards.org http://a11y.org
> >
> >_______________________________________________
> >Blinux-list mailing list
> >Blinux-list@redhat.com
> >https://www.redhat.com/mailman/listinfo/blinux-list
> >
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
--
Janina Sajka Phone: +1.240.715.1272
Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.
Chair, Accessibility Workgroup Free Standards Group (FSG)
janina@freestandards.org http://a11y.org
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: making distros like Asterisk at Home talk frominstallupthroughdaily use
` Janina Sajka
@ ` Brent Harding
0 siblings, 0 replies; 21+ messages in thread
From: Brent Harding @ UTC (permalink / raw)
To: Linux for blind general discussion
Oh, I looked at the manual online, I suppose if you hooked up to a router
and find out the dhcp address from the router's setup, you could get the IP
address and web configure without having to have someone set it up. The demo
site looks pretty easy to get around.
----- Original Message -----
From: "Janina Sajka" <janina@rednote.net>
To: "Linux for blind general discussion" <blinux-list@redhat.com>
Sent: Tuesday, June 20, 2006 3:54 PM
Subject: Re: making distros like Asterisk at Home talk
frominstallupthroughdaily use
> haven't created a dial plan, you press enter. No big deal.
>
> Point: The Snom 320 and Snom 300 are very easy to configure using lynx.
> Other phones I've tried are not easy to configure using our interfaces.
> Judge for yourself. Look at:
>
>
http://www.provu.co.uk/snom_demo/
>
> Brent Harding writes:
>> What is good about these handsets versus others out there? Are they
>> accessible to set up as far as the handset end of the configuration where
>> you need to give them the username, password, and server settings? It
>> really seems odd to use analog phones if you really don't need to on
>> these
>> systems, assuming you can just pick these up and dial.
>>
>> ----- Original Message -----
>> From: "Janina Sajka" <janina@rednote.net>
>> To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> Sent: Saturday, June 17, 2006 2:18 PM
>> Subject: Re: making distros like Asterisk at Home talk from
>> installupthroughdaily use
>>
>>
>> >OK, some facts.
>> >
>> >Asterisk is 100% accessible.
>> >
>> >Asterisk is not simple.
>> >
>> >Asterisk does not require a special kernel.
>> >
>> >You may need additional kernel modules for some PBX hardware, but these
>> >compile separately.
>> >
>> >Asterisk works 100% with Speakup
>> >
>> >Working asterisk rpms and deb files are available that work with
>> >Speakup, so stick to Fedora 5 or to recent Debian.
>> >
>> >There are a fair number of us Speakup users running our own Asterisk PBX
>> >systems. I've got one, and the IVR that answers Capital Accessibility
>> >phone calls is running on our Asterisk server on Fedora.
>> >
>> >If you go looking for native voip handsets, many of us are particularly
>> >preferring Snom 320 and the soon to be available Snom 300. I use my 320
>> >all the time. In fact, I now have 3 of them.
>> >
>> >Janina
>> >
>> >
>> >
>> >Brent Harding writes:
>> >>Actually it's not necessarily the web part I want to work with Speakup,
>> >>but
>> >>the linux it comes with. I thought I heard one can just get a tar ball
>> >>and
>> >>install it into anything. What I mean is how I'd put in a Kernel that
>> >>speaks versus one that doesn't so I can use the linux console of the
>> >>system
>> >>once it's up to find the IP that gets assigned and to set up dynamic
>> >>DNS
>> >>and a few other things I want on there.
>> >>
>> >>----- Original Message -----
>> >>From: "Janina Sajka" <janina@rednote.net>
>> >>To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> >>Sent: Wednesday, June 14, 2006 11:23 AM
>> >>Subject: Re: making distros like Asterisk at Home talk from
>> >>installupthrough daily use
>> >>
>> >>
>> >>>The Asterisk At Home page says it's a web gui. So, if you want it to
>> >>>work with Speakup, go fix the web markup so it will run with lynx or
>> >>>elinks or maybe edbrowse.
>> >>>
>> >>>You're rather asking how to use a hammer to slice an orange, sir.
>> >>>
>> >>>Janina
>> >>>
>> >>>Brent Harding writes:
>> >>>>Actually, it's a distribution iso image that contains CentOS, the
>> >>>>Asterisk
>> >>>>software which it compiles after the install reboots the system, and
>> >>>>various web and console config tools so you don't have to mess with
>> >>>>the
>> >>>>complex config files that often. I would control it remotely, but my
>> >>>>other
>> >>>>machine is XP and Windows Telnet and JFW doesn't work well to edit
>> >>>>files
>> >>>>on
>> >>>>remote systems and I never cared for Festival with Oralux. I wonder
>> >>>>how
>> >>>>I'd
>> >>>>throw in a talking Kernel and not make the module dependencies not be
>> >>>>mismatched? I'd rather just install the rest of the package over my
>> >>>>Fedora
>> >>>>I already left on there, but they built it around this distro.
>> >>>>
>> >>>>----- Original Message -----
>> >>>>From: "Janina Sajka" <janina@rednote.net>
>> >>>>To: "Linux for blind general discussion" <blinux-list@redhat.com>
>> >>>>Sent: Tuesday, June 13, 2006 3:24 PM
>> >>>>Subject: Re: making distros like Asterisk at Home talk from install
>> >>>>upthrough daily use
>> >>>>
>> >>>>
>> >>>>>Why? Why particularly Asterisk At Home when Asterisk itselfs works
>> >>>>>perfectly well with Speakup.
>> >>>>>
>> >>>>>Isn't Asterisk At Home a gui front end to Asterisk? Or, did I miss
>> >>>>>something here?
>> >>>>>
>> >>>>>Brent Harding writes:
>> >>>>>>Hi there! I want to know how I could make Asterisk at Home run with
>> >>>>>>a
>> >>>>>>speakup-enabled Kernel, especially through the installation and
>> >>>>>>all?
>> >>>>>>I
>> >>>>>>want
>> >>>>>>to use the Asterisk system and Voip and heard this was the easiest
>> >>>>>>way
>> >>>>>>to
>> >>>>>>do it My old machine I want to make into a Linux box has some core
>> >>>>>>of
>> >>>>>>Fedora on its secondary 6.whatever gig drive, and the 30 gig has 98
>> >>>>>>on
>> >>>>>>that
>> >>>>>>I just want certain files of and that will then be reformatted, and
>> >>>>>>it
>> >>>>>>has
>> >>>>>>my double talk board I used with that distro. Assuming that the
>> >>>>>>Fedora
>> >>>>>>on
>> >>>>>>there is still bootable and I remember the Root password, how would
>> >>>>>>I
>> >>>>>>modify the iso of the Asterisk at Home distro so I could have
>> >>>>>>talking
>> >>>>>>install and then boot into a talking system? I heard this is the
>> >>>>>>easiest
>> >>>>>>way of running such a system because you get the webbased admin
>> >>>>>>tools
>> >>>>>>that
>> >>>>>>are set up for that distro. The last time I tried just replacing
>> >>>>>>the
>> >>>>>>Kernel
>> >>>>>>on an install disk and reburning, I got module error disaster. How
>> >>>>>>do
>> >>>>>>I
>> >>>>>>prevent that this time?
>> >>>>>>
>> >>>>>>_______________________________________________
>> >>>>>>Blinux-list mailing list
>> >>>>>>Blinux-list@redhat.com
>> >>>>>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>>>
>> >>>>>--
>> >>>>>
>> >>>>>Janina Sajka Phone: +1.240.715.1272
>> >>>>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >>>>>
>> >>>>>Marketing the Owasys 22C talking screenless cell phone in the U.S.
>> >>>>>and
>> >>>>>Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >>>>>
>> >>>>>Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >>>>>janina@freestandards.org http://a11y.org
>> >>>>>
>> >>>>>_______________________________________________
>> >>>>>Blinux-list mailing list
>> >>>>>Blinux-list@redhat.com
>> >>>>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>>>
>> >>>>
>> >>>>_______________________________________________
>> >>>>Blinux-list mailing list
>> >>>>Blinux-list@redhat.com
>> >>>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>
>> >>>--
>> >>>
>> >>>Janina Sajka Phone: +1.240.715.1272
>> >>>Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >>>
>> >>>Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> >>>Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >>>
>> >>>Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >>>janina@freestandards.org http://a11y.org
>> >>>
>> >>>_______________________________________________
>> >>>Blinux-list mailing list
>> >>>Blinux-list@redhat.com
>> >>>https://www.redhat.com/mailman/listinfo/blinux-list
>> >>>
>> >>
>> >>_______________________________________________
>> >>Blinux-list mailing list
>> >>Blinux-list@redhat.com
>> >>https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>> >--
>> >
>> >Janina Sajka Phone: +1.240.715.1272
>> >Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>> >
>> >Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>> >Canada--Go to http://ScreenlessPhone.Com to learn more.
>> >
>> >Chair, Accessibility Workgroup Free Standards Group (FSG)
>> >janina@freestandards.org http://a11y.org
>> >
>> >_______________________________________________
>> >Blinux-list mailing list
>> >Blinux-list@redhat.com
>> >https://www.redhat.com/mailman/listinfo/blinux-list
>> >
>>
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list@redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>
> --
>
> Janina Sajka Phone: +1.240.715.1272
> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>
> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
> Canada--Go to http://ScreenlessPhone.Com to learn more.
>
> Chair, Accessibility Workgroup Free Standards Group (FSG)
> janina@freestandards.org http://a11y.org
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list@redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list
>
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
making distros like Asterisk at Home talk from install up through daily use Brent Harding
` Janina Sajka
` making distros like Asterisk at Home talk from install upthrough " hank
` making distros like Asterisk at Home talk from installupthrough " Brent Harding
` making distros like Asterisk at Home talk from install upthrough " Janina Sajka
` making distros like Asterisk at Home talk from installupthrough " Brent Harding
` making distros like Asterisk at Home talk from install upthrough " Brent Harding
` making distros like Asterisk at Home talk from installupthrough " hank
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from install upthrough daily use Janina Sajka
` making distros like Asterisk at Home talk from installupthrough " Geoff Shang
` making distros like Asterisk at Home talk from installupthroughdaily use hank
` making distros like Asterisk at Home talk frominstallupthroughdaily use Geoff Shang
` making distros like Asterisk at Home talkfrominstallupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk frominstallupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
` making distros like Asterisk at Home talk from installupthrough daily use Brent Harding
` Janina Sajka
` making distros like Asterisk at Home talk from installupthroughdaily use Brent Harding
` Janina Sajka
` making distros like Asterisk at Home talk frominstallupthroughdaily use Brent Harding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).