* lost interrupt? @ lawyer ` Andor Demarteau 0 siblings, 1 reply; 11+ messages in thread From: lawyer @ UTC (permalink / raw) To: blinux-list hello everyone! After I started my linux system with two harddisk,I move the second harddisk</dev/hdc> away. when I mount the no existing device </dev/hdc9> on my file system ,there is something wrong! kernel uninterruptedly display "mount :lost interrupt !",and we can't kill mount process. who can tell me how to repaire mount program? there are some patch to do it? ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? lost interrupt? lawyer @ ` Andor Demarteau ` lawyer 0 siblings, 1 reply; 11+ messages in thread From: Andor Demarteau @ UTC (permalink / raw) To: blinux-list hi, well it isn't custom to remove ide-devices wheile the system is running (at least that's waht you did as I understand it). Have a look at your process-table by typing; ps aux | grep mount this will give you a line wiht a lot of data and a Letter-cde on the right halve of the screen (capital letters R S W Z). If it reads Z it's a zombi-process and you can't kill it. The best way to go is to find the appropriate output format in the ps manual and find the parent-process of your mount process. If you found it, kill it. If by any change this is init itself, your fucked and a a complate reboot is ABSOLUTELY NECESSARY!!! good luck, On Tue, 28 Nov 2000, lawyer wrote: > hello everyone! > After I started my linux system with two harddisk,I move the second > harddisk</dev/hdc> away. > when I mount the no existing device </dev/hdc9> on my file system ,there is > something wrong! > kernel uninterruptedly display "mount :lost interrupt !",and we can't kill > mount process. > who can tell me how to repaire mount program? there are some patch to do it? > > > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > slainte leat freisin (cheers to you also), ----------- Andor Demarteau E-mail: ademarte@students.cs.uu.nl student computer science www: http://www.students.cs.uu.nl/~ademarte/ Utrecht University note: homepage is outdated, don't remind me! ----------- Believe in yourself, know what you want, and make it happen! ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` Andor Demarteau @ ` lawyer ` Andor Demarteau ` S. Massy 0 siblings, 2 replies; 11+ messages in thread From: lawyer @ UTC (permalink / raw) To: blinux-list I am sorry for my poor English! yes you are right.I remove ide-devices while the systemis running. but I do nothing mount action, only when starting the kernel recoginized the two ide-devices. ----- Original Message ----- From: Andor Demarteau <ademarte@students.cs.uu.nl> To: <blinux-list@redhat.com> Sent: Tuesday, November 28, 2000 4:23 PM Subject: Re: lost interrupt? > hi, > well it isn't custom to remove ide-devices wheile the system is running (at > least that's waht you did as I understand it). > Have a look at your process-table by typing; ps aux | grep mount > this will give you a line wiht a lot of data and a Letter-cde on the right > halve of the screen (capital letters R S W Z). > If it reads Z it's a zombi-process and you can't kill it. > The best way to go is to find the appropriate output format in the ps > manual and find the parent-process of your mount process. > If you found it, kill it. > > If by any change this is init itself, your fucked and a a complate reboot > is ABSOLUTELY NECESSARY!!! > > good luck, > > On Tue, 28 Nov 2000, lawyer wrote: > > > hello everyone! > > After I started my linux system with two harddisk,I move the second > > harddisk</dev/hdc> away. > > when I mount the no existing device </dev/hdc9> on my file system ,there is > > something wrong! > > kernel uninterruptedly display "mount :lost interrupt !",and we can't kill > > mount process. > > who can tell me how to repaire mount program? there are some patch to do it? > > > > > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > slainte leat freisin (cheers to you also), > ----------- > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > Utrecht University note: homepage is outdated, don't remind me! > ----------- > Believe in yourself, know what you want, and make it happen! > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` lawyer @ ` Andor Demarteau ` lawyer ` S. Massy 1 sibling, 1 reply; 11+ messages in thread From: Andor Demarteau @ UTC (permalink / raw) To: blinux-list look in your /etc/fstab if there is a line mounting the /dev/hdc9 partition in it without the keyword nonauto on it, it is automagically mounted during bootup. May I advice you not to remove ide-devices from your system wehn it's running unless you have a speical harddisk-reck for it which support hot-swapping of IDE-disks. On Tue, 28 Nov 2000, lawyer wrote: > I am sorry for my poor English! > yes you are right.I remove ide-devices while the systemis running. but I do > nothing mount action, only when starting the kernel recoginized the two > ide-devices. > > ----- Original Message ----- > From: Andor Demarteau <ademarte@students.cs.uu.nl> > To: <blinux-list@redhat.com> > Sent: Tuesday, November 28, 2000 4:23 PM > Subject: Re: lost interrupt? > > > > hi, > > well it isn't custom to remove ide-devices wheile the system is running > (at > > least that's waht you did as I understand it). > > Have a look at your process-table by typing; ps aux | grep mount > > this will give you a line wiht a lot of data and a Letter-cde on the right > > halve of the screen (capital letters R S W Z). > > If it reads Z it's a zombi-process and you can't kill it. > > The best way to go is to find the appropriate output format in the ps > > manual and find the parent-process of your mount process. > > If you found it, kill it. > > > > If by any change this is init itself, your fucked and a a complate reboot > > is ABSOLUTELY NECESSARY!!! > > > > good luck, > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > hello everyone! > > > After I started my linux system with two harddisk,I move the second > > > harddisk</dev/hdc> away. > > > when I mount the no existing device </dev/hdc9> on my file system > ,there is > > > something wrong! > > > kernel uninterruptedly display "mount :lost interrupt !",and we can't > kill > > > mount process. > > > who can tell me how to repaire mount program? there are some patch to > do it? > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > slainte leat freisin (cheers to you also), > > ----------- > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > > Utrecht University note: homepage is outdated, don't remind me! > > ----------- > > Believe in yourself, know what you want, and make it happen! > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > slainte leat freisin (cheers to you also), ----------- Andor Demarteau E-mail: ademarte@students.cs.uu.nl student computer science www: http://www.students.cs.uu.nl/~ademarte/ Utrecht University note: homepage is outdated, don't remind me! ----------- Believe in yourself, know what you want, and make it happen! ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` Andor Demarteau @ ` lawyer ` Andor Demarteau 0 siblings, 1 reply; 11+ messages in thread From: lawyer @ UTC (permalink / raw) To: blinux-list I have looked in /etc/fstab and /etc/mtab ,finding nothing about /dev/hdc. I must say that /dev/hdc9 wasn't mounted really! ----- Original Message ----- From: Andor Demarteau <ademarte@students.cs.uu.nl> To: <blinux-list@redhat.com> Sent: Tuesday, November 28, 2000 6:08 PM Subject: Re: lost interrupt? > look in your /etc/fstab > if there is a line mounting the /dev/hdc9 partition in it without the > keyword nonauto on it, it is automagically mounted during bootup. > May I advice you not to remove ide-devices from your system wehn it's > running unless you have a speical harddisk-reck for it which support > hot-swapping of IDE-disks. > > > On Tue, 28 Nov 2000, lawyer wrote: > > > I am sorry for my poor English! > > yes you are right.I remove ide-devices while the systemis running. but I do > > nothing mount action, only when starting the kernel recoginized the two > > ide-devices. > > > > ----- Original Message ----- > > From: Andor Demarteau <ademarte@students.cs.uu.nl> > > To: <blinux-list@redhat.com> > > Sent: Tuesday, November 28, 2000 4:23 PM > > Subject: Re: lost interrupt? > > > > > > > hi, > > > well it isn't custom to remove ide-devices wheile the system is running > > (at > > > least that's waht you did as I understand it). > > > Have a look at your process-table by typing; ps aux | grep mount > > > this will give you a line wiht a lot of data and a Letter-cde on the right > > > halve of the screen (capital letters R S W Z). > > > If it reads Z it's a zombi-process and you can't kill it. > > > The best way to go is to find the appropriate output format in the ps > > > manual and find the parent-process of your mount process. > > > If you found it, kill it. > > > > > > If by any change this is init itself, your fucked and a a complate reboot > > > is ABSOLUTELY NECESSARY!!! > > > > > > good luck, > > > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > > > hello everyone! > > > > After I started my linux system with two harddisk,I move the second > > > > harddisk</dev/hdc> away. > > > > when I mount the no existing device </dev/hdc9> on my file system > > ,there is > > > > something wrong! > > > > kernel uninterruptedly display "mount :lost interrupt !",and we can't > > kill > > > > mount process. > > > > who can tell me how to repaire mount program? there are some patch to > > do it? > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Blinux-list mailing list > > > > Blinux-list@redhat.com > > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > slainte leat freisin (cheers to you also), > > > ----------- > > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > > > Utrecht University note: homepage is outdated, don't remind me! > > > ----------- > > > Believe in yourself, know what you want, and make it happen! > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > slainte leat freisin (cheers to you also), > ----------- > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > Utrecht University note: homepage is outdated, don't remind me! > ----------- > Believe in yourself, know what you want, and make it happen! > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` lawyer @ ` Andor Demarteau ` lawyer 0 siblings, 1 reply; 11+ messages in thread From: Andor Demarteau @ UTC (permalink / raw) To: blinux-list well, removing an ide-device and then trying to mount a partition on that removed disk is bound to cause troubbles anyhow. did you look at the ps output like I suggested to see the status of your mount process (which as I understand it hanged upon you trying to mount the /dev/hdc9 partition)? On Tue, 28 Nov 2000, lawyer wrote: > I have looked in /etc/fstab and /etc/mtab ,finding nothing about /dev/hdc. > I must say that /dev/hdc9 wasn't mounted really! > ----- Original Message ----- > From: Andor Demarteau <ademarte@students.cs.uu.nl> > To: <blinux-list@redhat.com> > Sent: Tuesday, November 28, 2000 6:08 PM > Subject: Re: lost interrupt? > > > > look in your /etc/fstab > > if there is a line mounting the /dev/hdc9 partition in it without the > > keyword nonauto on it, it is automagically mounted during bootup. > > May I advice you not to remove ide-devices from your system wehn it's > > running unless you have a speical harddisk-reck for it which support > > hot-swapping of IDE-disks. > > > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > I am sorry for my poor English! > > > yes you are right.I remove ide-devices while the systemis running. but > I do > > > nothing mount action, only when starting the kernel recoginized the two > > > ide-devices. > > > > > > ----- Original Message ----- > > > From: Andor Demarteau <ademarte@students.cs.uu.nl> > > > To: <blinux-list@redhat.com> > > > Sent: Tuesday, November 28, 2000 4:23 PM > > > Subject: Re: lost interrupt? > > > > > > > > > > hi, > > > > well it isn't custom to remove ide-devices wheile the system is > running > > > (at > > > > least that's waht you did as I understand it). > > > > Have a look at your process-table by typing; ps aux | grep mount > > > > this will give you a line wiht a lot of data and a Letter-cde on the > right > > > > halve of the screen (capital letters R S W Z). > > > > If it reads Z it's a zombi-process and you can't kill it. > > > > The best way to go is to find the appropriate output format in the ps > > > > manual and find the parent-process of your mount process. > > > > If you found it, kill it. > > > > > > > > If by any change this is init itself, your fucked and a a complate > reboot > > > > is ABSOLUTELY NECESSARY!!! > > > > > > > > good luck, > > > > > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > > > > > hello everyone! > > > > > After I started my linux system with two harddisk,I move the > second > > > > > harddisk</dev/hdc> away. > > > > > when I mount the no existing device </dev/hdc9> on my file system > > > ,there is > > > > > something wrong! > > > > > kernel uninterruptedly display "mount :lost interrupt !",and we > can't > > > kill > > > > > mount process. > > > > > who can tell me how to repaire mount program? there are some patch > to > > > do it? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Blinux-list mailing list > > > > > Blinux-list@redhat.com > > > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > slainte leat freisin (cheers to you also), > > > > ----------- > > > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > > > student computer science www: > http://www.students.cs.uu.nl/~ademarte/ > > > > Utrecht University note: homepage is outdated, don't remind > me! > > > > ----------- > > > > Believe in yourself, know what you want, and make it happen! > > > > > > > > > > > > > > > > _______________________________________________ > > > > Blinux-list mailing list > > > > Blinux-list@redhat.com > > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > slainte leat freisin (cheers to you also), > > ----------- > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > > Utrecht University note: homepage is outdated, don't remind me! > > ----------- > > Believe in yourself, know what you want, and make it happen! > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > slainte leat freisin (cheers to you also), ----------- Andor Demarteau E-mail: ademarte@students.cs.uu.nl student computer science www: http://www.students.cs.uu.nl/~ademarte/ Utrecht University note: homepage is outdated, don't remind me! ----------- Believe in yourself, know what you want, and make it happen! ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` Andor Demarteau @ ` lawyer ` Andor Demarteau 0 siblings, 1 reply; 11+ messages in thread From: lawyer @ UTC (permalink / raw) To: blinux-list yes I hava run <ps aux|grep mount> ,nothing returned! after started ,I did some mount,but I did umount too,before removing! some program of mount: ... fd=open("/dev/hdc9",...) if(fd<0) return 0; if(lseek(...)!=1024||( read(fd,(char *) &sb,sizeof(sb)) ) != sizeof(sb)) ... the program can open "/dev/hdc9" correctly, but,when read(...) ,because I remove the ide-disk, kernel cann't find the device ,and recognizes this as a time-out or other mistake and reports "mount : lost interrupts!" ----- Original Message ----- From: Andor Demarteau <ademarte@students.cs.uu.nl> To: <blinux-list@redhat.com> Sent: Tuesday, November 28, 2000 6:56 PM Subject: Re: lost interrupt? > well, removing an ide-device and then trying to mount a partition on that > removed disk is bound to cause troubbles anyhow. > > did you look at the ps output like I suggested to see the status of your > mount process (which as I understand it hanged upon you trying to mount the > /dev/hdc9 partition)? ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` lawyer @ ` Andor Demarteau 0 siblings, 0 replies; 11+ messages in thread From: Andor Demarteau @ UTC (permalink / raw) To: blinux-list let's call this thread finished and let the final point be that ide-devices can not be removed during system-online. In that respect I can't help you and only give you the advice to poweroff, place the disk back if needed and startup again. regards, On Wed, 29 Nov 2000, lawyer wrote: > yes I hava run <ps aux|grep mount> ,nothing returned! after started ,I did > some mount,but I did umount too,before removing! > > some program of mount: > ... > fd=open("/dev/hdc9",...) > if(fd<0) return 0; > if(lseek(...)!=1024||( read(fd,(char *) &sb,sizeof(sb)) ) != sizeof(sb)) > ... > the program can open "/dev/hdc9" correctly, but,when read(...) ,because I > remove the ide-disk, kernel cann't find the device ,and recognizes this as a > time-out or other mistake and reports "mount : lost interrupts!" > > > ----- Original Message ----- > From: Andor Demarteau <ademarte@students.cs.uu.nl> > To: <blinux-list@redhat.com> > Sent: Tuesday, November 28, 2000 6:56 PM > Subject: Re: lost interrupt? > > > > well, removing an ide-device and then trying to mount a partition on that > > removed disk is bound to cause troubbles anyhow. > > > > did you look at the ps output like I suggested to see the status of your > > mount process (which as I understand it hanged upon you trying to mount > the > > /dev/hdc9 partition)? > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > slainte leat freisin (cheers to you also), ----------- Andor Demarteau E-mail: ademarte@students.cs.uu.nl student computer science www: http://www.students.cs.uu.nl/~ademarte/ Utrecht University note: homepage is outdated, don't remind me! ----------- Believe in yourself, know what you want, and make it happen! ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` lawyer ` Andor Demarteau @ ` S. Massy ` Andor Demarteau 1 sibling, 1 reply; 11+ messages in thread From: S. Massy @ UTC (permalink / raw) To: blinux-list On Tue, 28 Nov 2000, lawyer wrote: > I am sorry for my poor English! > yes you are right.I remove ide-devices while the systemis running. but I do > nothing mount action, only when starting the kernel recoginized the two > ide-devices. So far as I know you CANNOT remove a standard IDE device while the system is running and hope things still to work. Don't forget that the HD you removed was on the same bus as the other HD left in place most likely; the message you receive from mount might very well speak your HD that's still in place. Please anyone correct me if I'm wrong, but I do not believe that neither regular PC hardware nor the linux kernel were ever designed to face such situations... > > ----- Original Message ----- > From: Andor Demarteau <ademarte@students.cs.uu.nl> > To: <blinux-list@redhat.com> > Sent: Tuesday, November 28, 2000 4:23 PM > Subject: Re: lost interrupt? > > > > hi, > > well it isn't custom to remove ide-devices wheile the system is running > (at > > least that's waht you did as I understand it). > > Have a look at your process-table by typing; ps aux | grep mount > > this will give you a line wiht a lot of data and a Letter-cde on the right > > halve of the screen (capital letters R S W Z). > > If it reads Z it's a zombi-process and you can't kill it. > > The best way to go is to find the appropriate output format in the ps > > manual and find the parent-process of your mount process. > > If you found it, kill it. > > > > If by any change this is init itself, your fucked and a a complate reboot > > is ABSOLUTELY NECESSARY!!! > > > > good luck, > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > hello everyone! > > > After I started my linux system with two harddisk,I move the second > > > harddisk</dev/hdc> away. > > > when I mount the no existing device </dev/hdc9> on my file system > ,there is > > > something wrong! > > > kernel uninterruptedly display "mount :lost interrupt !",and we can't > kill > > > mount process. > > > who can tell me how to repaire mount program? there are some patch to > do it? > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > slainte leat freisin (cheers to you also), > > ----------- > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > > Utrecht University note: homepage is outdated, don't remind me! > > ----------- > > Believe in yourself, know what you want, and make it happen! > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` S. Massy @ ` Andor Demarteau ` L. C. Robinson 0 siblings, 1 reply; 11+ messages in thread From: Andor Demarteau @ UTC (permalink / raw) To: blinux-list hi, your correct. Only if you have a hd-rack you can hotswap ide-disks (if the rack suppots it anyway). Any other removal of ide-stuff should normally give trouble or crash your box. On Tue, 28 Nov 2000, S. Massy wrote: > On Tue, 28 Nov 2000, lawyer wrote: > > > I am sorry for my poor English! > > yes you are right.I remove ide-devices while the systemis running. but I do > > nothing mount action, only when starting the kernel recoginized the two > > ide-devices. > > So far as I know you CANNOT remove a standard IDE device while the > system is running and hope things still to work. Don't forget that the > HD you removed was on the same bus as the other HD left in place most > likely; the message you receive from mount might very well speak your > HD that's still in place. Please anyone correct me if I'm wrong, but I > do not believe that neither regular PC hardware nor the linux kernel > were ever designed to face such situations... > > > > > ----- Original Message ----- > > From: Andor Demarteau <ademarte@students.cs.uu.nl> > > To: <blinux-list@redhat.com> > > Sent: Tuesday, November 28, 2000 4:23 PM > > Subject: Re: lost interrupt? > > > > > > > hi, > > > well it isn't custom to remove ide-devices wheile the system is running > > (at > > > least that's waht you did as I understand it). > > > Have a look at your process-table by typing; ps aux | grep mount > > > this will give you a line wiht a lot of data and a Letter-cde on the right > > > halve of the screen (capital letters R S W Z). > > > If it reads Z it's a zombi-process and you can't kill it. > > > The best way to go is to find the appropriate output format in the ps > > > manual and find the parent-process of your mount process. > > > If you found it, kill it. > > > > > > If by any change this is init itself, your fucked and a a complate reboot > > > is ABSOLUTELY NECESSARY!!! > > > > > > good luck, > > > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > > > hello everyone! > > > > After I started my linux system with two harddisk,I move the second > > > > harddisk</dev/hdc> away. > > > > when I mount the no existing device </dev/hdc9> on my file system > > ,there is > > > > something wrong! > > > > kernel uninterruptedly display "mount :lost interrupt !",and we can't > > kill > > > > mount process. > > > > who can tell me how to repaire mount program? there are some patch to > > do it? > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Blinux-list mailing list > > > > Blinux-list@redhat.com > > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > slainte leat freisin (cheers to you also), > > > ----------- > > > Andor Demarteau E-mail: ademarte@students.cs.uu.nl > > > student computer science www: http://www.students.cs.uu.nl/~ademarte/ > > > Utrecht University note: homepage is outdated, don't remind me! > > > ----------- > > > Believe in yourself, know what you want, and make it happen! > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > slainte leat freisin (cheers to you also), ----------- Andor Demarteau E-mail: ademarte@students.cs.uu.nl student computer science www: http://www.students.cs.uu.nl/~ademarte/ Utrecht University note: homepage is outdated, don't remind me! ----------- Believe in yourself, know what you want, and make it happen! ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: lost interrupt? ` Andor Demarteau @ ` L. C. Robinson 0 siblings, 0 replies; 11+ messages in thread From: L. C. Robinson @ UTC (permalink / raw) To: blinux-list Not to mention the significant risk of permanent damage to hardware that was not designed for hot plugging. Before hot plugging stuff, you should make sure that the interface standards specify that it can withstand such abuse, as, for instance, serial ports can: even many of the external ports on the back of your computer are risky candidates for this sort of thing (you should query or search an appropriate newsgroup for the details of what will work safely -- this whole thread is off topic). Even so, you can't expect to remove or install, say a serial mouse, and have the thing work automatically, without reconfiguration (in some cases, there are programs that can automagically reconfigure hardware, usually only during bootup). LCR On Tue, 28 Nov 2000, Andor Demarteau wrote: > your correct. Only if you have a hd-rack you can hotswap > ide-disks (if the rack suppots it anyway). Any other removal > of ide-stuff should normally give trouble or crash your box. .... > > > > On Tue, 28 Nov 2000, lawyer wrote: > > > > > > > > > hello everyone! After I started my linux system with > > > > > two harddisk,I move the second harddisk</dev/hdc> > > > > > away. -- L. C. Robinson reply to no_spam+munged_lcr@onewest.net.invalid People buy MicroShaft for compatibility, but get incompatibility and instability instead. This is award winning "innovation". Find out how MS holds your data hostage with "The *Lens*"; see "CyberSnare" at http://www.netaction.org/msoft/cybersnare.html ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
lost interrupt? lawyer
` Andor Demarteau
` lawyer
` Andor Demarteau
` lawyer
` Andor Demarteau
` lawyer
` Andor Demarteau
` S. Massy
` Andor Demarteau
` L. C. Robinson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).