* redhat speakup distribution installation problem. @ Nektarios Mallas ` Janina Sajka 0 siblings, 1 reply; 6+ messages in thread From: Nektarios Mallas @ UTC (permalink / raw) To: blinux-list Hi listers. I downloaded and trying to install the linux speakup distribution. I successfuly boott with my speech synthesizer, select English as language and speakup as keyboard. That's when the problem ocures. I get a message that an unhandled exception from anaconda happened, and my system shuts down, the cd is ejected and the only option is to reboot. It also says something like a bug report that I can save to a floppy and send it to anaconda's development team. Can someone help? Should I choose another keyboard layout? Thanks alot. Nektarios. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: redhat speakup distribution installation problem. redhat speakup distribution installation problem Nektarios Mallas @ ` Janina Sajka ` Nektarios Mallas 0 siblings, 1 reply; 6+ messages in thread From: Janina Sajka @ UTC (permalink / raw) To: blinux-list Hi, Nektarios: You've stumbled across a known bug in the current release of the Speakup Modified Red Hat Distribution. There is a workaround and we're working on a solution. The workaround is also documented in the latest draft version of our installation HOWTO available at: http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html Here's what you should do: 1.) Create a bootable floppy or a bootable cdrom using only the boot floppy image. 2.) Boot from this floppy (or cdrom) without the installation cd rom available to the system. In other words, keep the drive bay open, or don't insert the installation CD ROM yet. 3.) This will give you an additional screen that asks you to specify where the installation images can be found. At this point you can insert the CD ROM and continue. PS: There is also a second bug where the speech appears to be one line below where your selection actually is. In other words, your installation language selection appears to default to French, though it is actually on English. Be careful. This behavior continues on many screens. The problem has been narrowed the the new release of ncurses and the newt library in particular. We are also working toward a fix with this problem. On Thu, 23 May 2002, Nektarios Mallas wrote: > Hi listers. > I downloaded and trying to install the linux speakup distribution. > I successfuly boott with my speech synthesizer, select English as language > and speakup as keyboard. That's when the problem ocures. I get a message > that an unhandled exception from anaconda happened, and my system shuts > down, the cd is ejected and the only option is to reboot. It also says > something like a bug report that I can save to a floppy and send it to > anaconda's development team. > Can someone help? Should I choose another keyboard layout? > Thanks alot. > Nektarios. > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > -- Janina Sajka, Director Technology Research and Development Governmental Relations Group American Foundation for the Blind (AFB) Email: janina@afb.net Phone: (202) 408-8175 Chair, Accessibility SIG Open Electronic Book Forum (OEBF) http://www.openebook.org ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: redhat speakup distribution installation problem. ` Janina Sajka @ ` Nektarios Mallas ` Janina Sajka 0 siblings, 1 reply; 6+ messages in thread From: Nektarios Mallas @ UTC (permalink / raw) To: blinux-list Ok thanks alot for the response. I created a boot floppy and I am about to start again. About the other bug with the newt library and the cursor. Is there any way to tell when the problem actually occurs? In other words, is there any speakup function with the navigation keys to tell you which selection is actually active? Regards. Nektarios. -----Original Message----- From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On Behalf Of Janina Sajka Sent: Thursday, May 23, 2002 6:24 PM To: blinux-list@redhat.com Subject: Re: redhat speakup distribution installation problem. Hi, Nektarios: You've stumbled across a known bug in the current release of the Speakup Modified Red Hat Distribution. There is a workaround and we're working on a solution. The workaround is also documented in the latest draft version of our installation HOWTO available at: http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html Here's what you should do: 1.) Create a bootable floppy or a bootable cdrom using only the boot floppy image. 2.) Boot from this floppy (or cdrom) without the installation cd rom available to the system. In other words, keep the drive bay open, or don't insert the installation CD ROM yet. 3.) This will give you an additional screen that asks you to specify where the installation images can be found. At this point you can insert the CD ROM and continue. PS: There is also a second bug where the speech appears to be one line below where your selection actually is. In other words, your installation language selection appears to default to French, though it is actually on English. Be careful. This behavior continues on many screens. The problem has been narrowed the the new release of ncurses and the newt library in particular. We are also working toward a fix with this problem. On Thu, 23 May 2002, Nektarios Mallas wrote: > Hi listers. > I downloaded and trying to install the linux speakup distribution. > I successfuly boott with my speech synthesizer, select English as language > and speakup as keyboard. That's when the problem ocures. I get a message > that an unhandled exception from anaconda happened, and my system shuts > down, the cd is ejected and the only option is to reboot. It also says > something like a bug report that I can save to a floppy and send it to > anaconda's development team. > Can someone help? Should I choose another keyboard layout? > Thanks alot. > Nektarios. > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > -- Janina Sajka, Director Technology Research and Development Governmental Relations Group American Foundation for the Blind (AFB) Email: janina@afb.net Phone: (202) 408-8175 Chair, Accessibility SIG Open Electronic Book Forum (OEBF) http://www.openebook.org _______________________________________________ Blinux-list mailing list Blinux-list@redhat.com https://listman.redhat.com/mailman/listinfo/blinux-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: redhat speakup distribution installation problem. ` Nektarios Mallas @ ` Janina Sajka ` Nektarios Mallas 0 siblings, 1 reply; 6+ messages in thread From: Janina Sajka @ UTC (permalink / raw) To: blinux-list I think the best way to know for sure is to check the char attributes with Insert+dot. The highlighted item will be different from the rest and should be directly above. On Thu, 23 May 2002, Nektarios Mallas wrote: > Ok thanks alot for the response. > I created a boot floppy and I am about to start again. > About the other bug with the newt library and the cursor. Is there any way > to tell when the problem actually occurs? In other words, is there any > speakup function with the navigation keys to tell you which selection is > actually active? > > Regards. > Nektarios. > > > > -----Original Message----- > From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On > Behalf Of Janina Sajka > Sent: Thursday, May 23, 2002 6:24 PM > To: blinux-list@redhat.com > Subject: Re: redhat speakup distribution installation problem. > > > Hi, Nektarios: > > You've stumbled across a known bug in the current release of the > Speakup Modified Red Hat Distribution. There is a workaround and > we're working on a solution. The workaround is also documented in > the latest draft version of our installation HOWTO available at: > > > http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html > > Here's what you should do: > > 1.) Create a bootable floppy or a bootable cdrom using only > the boot floppy image. > > 2.) Boot from this floppy (or cdrom) without the > installation cd rom available to the system. In other words, keep > the drive bay open, or don't insert the installation CD ROM yet. > > 3.) This will give you an additional screen that asks you to > specify where the installation images can be found. At this point > you can insert the CD ROM and continue. > > PS: There is also a second bug where the speech appears to be one > line below where your selection actually is. In other words, your > installation language selection appears to default to French, > though it is actually on English. Be careful. This behavior > continues on many screens. The problem has been narrowed the the > new release of ncurses and the newt library in particular. We are > also working toward a fix with this problem. > > On Thu, 23 May 2002, Nektarios Mallas wrote: > > > Hi listers. > > I downloaded and trying to install the linux speakup distribution. > > I successfuly boott with my speech synthesizer, select English as language > > and speakup as keyboard. That's when the problem ocures. I get a message > > that an unhandled exception from anaconda happened, and my system shuts > > down, the cd is ejected and the only option is to reboot. It also says > > something like a bug report that I can save to a floppy and send it to > > anaconda's development team. > > Can someone help? Should I choose another keyboard layout? > > Thanks alot. > > Nektarios. > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > -- > > Janina Sajka, Director > Technology Research and Development > Governmental Relations Group > American Foundation for the Blind (AFB) > > Email: janina@afb.net Phone: (202) 408-8175 > > Chair, Accessibility SIG > Open Electronic Book Forum (OEBF) > http://www.openebook.org > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > -- Janina Sajka, Director Technology Research and Development Governmental Relations Group American Foundation for the Blind (AFB) Email: janina@afb.net Phone: (202) 408-8175 Chair, Accessibility SIG Open Electronic Book Forum (OEBF) http://www.openebook.org ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: redhat speakup distribution installation problem. ` Janina Sajka @ ` Nektarios Mallas ` Janina Sajka 0 siblings, 1 reply; 6+ messages in thread From: Nektarios Mallas @ UTC (permalink / raw) To: blinux-list Ok, after much effort and moving around I finally installed the distribution on my system. However I made 2 mistakes. Can you help me to correct them? 1. At the very last screen I accidentaly selected the graphical interface as the default. So the system starts with x and much is loaded without actually needing it. Can I go back to a text login prompt and not having to go to a console with ctrl+alt+f1 to do it? 2. Lilo is booting to linux as the first choice. I still depend on windows for some tasks and I want windows as the first choice. Can I do that? Thanks again. Ps. I know I have alot of reading to do but I am greatful that there are many helpful people on the list. I hope I will be able to help myself at some point. Regards. Nektarios. -----Original Message----- From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On Behalf Of Janina Sajka Sent: Thursday, May 23, 2002 10:01 PM To: blinux-list@redhat.com Subject: RE: redhat speakup distribution installation problem. I think the best way to know for sure is to check the char attributes with Insert+dot. The highlighted item will be different from the rest and should be directly above. On Thu, 23 May 2002, Nektarios Mallas wrote: > Ok thanks alot for the response. > I created a boot floppy and I am about to start again. > About the other bug with the newt library and the cursor. Is there any way > to tell when the problem actually occurs? In other words, is there any > speakup function with the navigation keys to tell you which selection is > actually active? > > Regards. > Nektarios. > > > > -----Original Message----- > From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On > Behalf Of Janina Sajka > Sent: Thursday, May 23, 2002 6:24 PM > To: blinux-list@redhat.com > Subject: Re: redhat speakup distribution installation problem. > > > Hi, Nektarios: > > You've stumbled across a known bug in the current release of the > Speakup Modified Red Hat Distribution. There is a workaround and > we're working on a solution. The workaround is also documented in > the latest draft version of our installation HOWTO available at: > > > http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html > > Here's what you should do: > > 1.) Create a bootable floppy or a bootable cdrom using only > the boot floppy image. > > 2.) Boot from this floppy (or cdrom) without the > installation cd rom available to the system. In other words, keep > the drive bay open, or don't insert the installation CD ROM yet. > > 3.) This will give you an additional screen that asks you to > specify where the installation images can be found. At this point > you can insert the CD ROM and continue. > > PS: There is also a second bug where the speech appears to be one > line below where your selection actually is. In other words, your > installation language selection appears to default to French, > though it is actually on English. Be careful. This behavior > continues on many screens. The problem has been narrowed the the > new release of ncurses and the newt library in particular. We are > also working toward a fix with this problem. > > On Thu, 23 May 2002, Nektarios Mallas wrote: > > > Hi listers. > > I downloaded and trying to install the linux speakup distribution. > > I successfuly boott with my speech synthesizer, select English as language > > and speakup as keyboard. That's when the problem ocures. I get a message > > that an unhandled exception from anaconda happened, and my system shuts > > down, the cd is ejected and the only option is to reboot. It also says > > something like a bug report that I can save to a floppy and send it to > > anaconda's development team. > > Can someone help? Should I choose another keyboard layout? > > Thanks alot. > > Nektarios. > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > -- > > Janina Sajka, Director > Technology Research and Development > Governmental Relations Group > American Foundation for the Blind (AFB) > > Email: janina@afb.net Phone: (202) 408-8175 > > Chair, Accessibility SIG > Open Electronic Book Forum (OEBF) > http://www.openebook.org > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > -- Janina Sajka, Director Technology Research and Development Governmental Relations Group American Foundation for the Blind (AFB) Email: janina@afb.net Phone: (202) 408-8175 Chair, Accessibility SIG Open Electronic Book Forum (OEBF) http://www.openebook.org _______________________________________________ Blinux-list mailing list Blinux-list@redhat.com https://listman.redhat.com/mailman/listinfo/blinux-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: redhat speakup distribution installation problem. ` Nektarios Mallas @ ` Janina Sajka 0 siblings, 0 replies; 6+ messages in thread From: Janina Sajka @ UTC (permalink / raw) To: blinux-list Hi, Nektarios: No problem. The two changes you want to make are easily made. The issue of defaulting to the graphical mode is also addressed in our installation HOWTO, because it is a common mistake. Here's what you need to do. Become root and edit the file /etc/inittab. You will find a line that says something like: id:5:initdefault: The "5" sets the gui default. Change it to a "3" for the text console default, so that it appears like this: id:3:initdefault: Next, edit your /etc/lilo.conf. First, make certain that you have an entry such as: other=/dev/hda3 optional label=dos Then, near the top, find a line that says something like: default = linux and change it to say: default = dos Save and exit, then type: lilo If lilo recompiles without errors, your default will be Windows. Of course, your particulars may not be the same as mine. You may have called your Microsoft partition "win," or "windows," where I've called mine "dos." And, yours may not be located at /dev/hda3, as mine is. Congradulations on achieving a successful installation. On Fri, 24 May 2002, Nektarios Mallas wrote: > Ok, after much effort and moving around I finally installed the distribution > on my system. > However I made 2 mistakes. Can you help me to correct them? > 1. At the very last screen I accidentaly selected the graphical interface as > the default. So the system starts with x and much is loaded without actually > needing it. Can I go back to a text login prompt and not having to go to a > console with ctrl+alt+f1 to do it? > > 2. Lilo is booting to linux as the first choice. I still depend on windows > for some tasks and I want windows as the first choice. Can I do that? > > Thanks again. > Ps. I know I have alot of reading to do but I am greatful that there are > many helpful people on the list. > I hope I will be able to help myself at some point. > Regards. > Nektarios. > > -----Original Message----- > From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On > Behalf Of Janina Sajka > Sent: Thursday, May 23, 2002 10:01 PM > To: blinux-list@redhat.com > Subject: RE: redhat speakup distribution installation problem. > > > I think the best way to know for sure is to check the char > attributes with Insert+dot. The highlighted item will be > different from the rest and should be directly above. > > On Thu, 23 May 2002, Nektarios Mallas wrote: > > > Ok thanks alot for the response. > > I created a boot floppy and I am about to start again. > > About the other bug with the newt library and the cursor. Is there any way > > to tell when the problem actually occurs? In other words, is there any > > speakup function with the navigation keys to tell you which selection is > > actually active? > > > > Regards. > > Nektarios. > > > > > > > > -----Original Message----- > > From: blinux-list-admin@redhat.com [mailto:blinux-list-admin@redhat.com]On > > Behalf Of Janina Sajka > > Sent: Thursday, May 23, 2002 6:24 PM > > To: blinux-list@redhat.com > > Subject: Re: redhat speakup distribution installation problem. > > > > > > Hi, Nektarios: > > > > You've stumbled across a known bug in the current release of the > > Speakup Modified Red Hat Distribution. There is a workaround and > > we're working on a solution. The workaround is also documented in > > the latest draft version of our installation HOWTO available at: > > > > > > http://www.linux-speakup.org/ftp/disks/redhat/HOWTO_INSTALL.html > > > > Here's what you should do: > > > > 1.) Create a bootable floppy or a bootable cdrom using only > > the boot floppy image. > > > > 2.) Boot from this floppy (or cdrom) without the > > installation cd rom available to the system. In other words, keep > > the drive bay open, or don't insert the installation CD ROM yet. > > > > 3.) This will give you an additional screen that asks you to > > specify where the installation images can be found. At this point > > you can insert the CD ROM and continue. > > > > PS: There is also a second bug where the speech appears to be one > > line below where your selection actually is. In other words, your > > installation language selection appears to default to French, > > though it is actually on English. Be careful. This behavior > > continues on many screens. The problem has been narrowed the the > > new release of ncurses and the newt library in particular. We are > > also working toward a fix with this problem. > > > > On Thu, 23 May 2002, Nektarios Mallas wrote: > > > > > Hi listers. > > > I downloaded and trying to install the linux speakup distribution. > > > I successfuly boott with my speech synthesizer, select English as > language > > > and speakup as keyboard. That's when the problem ocures. I get a message > > > that an unhandled exception from anaconda happened, and my system shuts > > > down, the cd is ejected and the only option is to reboot. It also says > > > something like a bug report that I can save to a floppy and send it to > > > anaconda's development team. > > > Can someone help? Should I choose another keyboard layout? > > > Thanks alot. > > > Nektarios. > > > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@redhat.com > > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > -- > > > > Janina Sajka, Director > > Technology Research and Development > > Governmental Relations Group > > American Foundation for the Blind (AFB) > > > > Email: janina@afb.net Phone: (202) 408-8175 > > > > Chair, Accessibility SIG > > Open Electronic Book Forum (OEBF) > > http://www.openebook.org > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > -- > > Janina Sajka, Director > Technology Research and Development > Governmental Relations Group > American Foundation for the Blind (AFB) > > Email: janina@afb.net Phone: (202) 408-8175 > > Chair, Accessibility SIG > Open Electronic Book Forum (OEBF) > http://www.openebook.org > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@redhat.com > https://listman.redhat.com/mailman/listinfo/blinux-list > -- Janina Sajka, Director Technology Research and Development Governmental Relations Group American Foundation for the Blind (AFB) Email: janina@afb.net Phone: (202) 408-8175 Chair, Accessibility SIG Open Electronic Book Forum (OEBF) http://www.openebook.org ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~ UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
redhat speakup distribution installation problem Nektarios Mallas
` Janina Sajka
` Nektarios Mallas
` Janina Sajka
` Nektarios Mallas
` Janina Sajka
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).